LAISHA
Open Laisha

UGC NET Circular Economy & Bio-based Resources: practice questions

UGC NET — Environmental Sciences (subject code 89) · India · National Testing Agency for the University Grants Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
53written to this exam in this subject
11syllabus units

About UGC NET

UGC NET — Environmental Sciences (subject code 89) is a PhD, fellowship and lectureship exam run by National Testing Agency for the University Grants Commission, for candidates in India. Computer-based, 3 hours, two papers in one sitting: Paper 1 (teaching and research aptitude, 50 MCQs) and Paper 2 (subject, 100 MCQs), 2 marks each, no negative marking.

Official site: ugcnetonline.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Circular Economy & Bio-based Resources in UGC NET

Waste hierarchy, EPR and Indian waste rules, industrial ecology and symbiosis (Kalundborg), eco-labels and biodegradable plastics, MFA basics.

Designing waste out of the system: circular-economy principles, the biological cycle, industrial symbiosis, material flow analysis and the bioeconomy. Composting, biogas and briquetting technology are in the Agricultural Engineering subjects bioenergy-systems and waste-management-environmental-engg; this subject covers the system design, metrics and policy.

Our 53 UGC NET questions in this subject: 18 easy, 25 medium, 10 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to UGC NET and are not shown on any other exam's page.

Question 1 · medium

Which concept explains why efficiency gains or cheap second-hand goods can fail to reduce total resource use?

  1. The rebound effect
  2. The polluter-pays principle
  3. The precautionary principle
  4. The cascading principle
Answer and working

A. The rebound effect

The rebound effect is the rise in consumption that follows a fall in effective cost, which can cancel resource savings. The polluter-pays and precautionary principles are environmental law principles; cascading concerns the order of biomass uses.

Question 2 · hard

Which statement about the limits of a fully circular economy is correct?

  1. The first law of thermodynamics allows materials to be recycled endlessly with no quality loss
  2. Recycled materials always have lower life cycle impacts than virgin ones, so loss is irrelevant to the outcome
  3. Circularity is limited only by consumer behaviour, since recycling technology has no losses
  4. Every loop loses material and quality, so growing demand cannot be met from recycled stocks alone
Answer and working

D. Every loop loses material and quality, so growing demand cannot be met from recycled stocks alone

Dissipation and downcycling (second law of thermodynamics) mean each loop loses some material and quality, and when demand grows, stocks available for recycling lag behind need. Recycled materials are not always lower-impact once collection and processing are counted, and recycling processes do have losses.

Question 3 · easy

In the biomass value pyramid, which use sits at the broad base (highest volume, lowest value)?

  1. Pharmaceuticals and fine chemicals
  2. Food
  3. Heat and electricity
  4. Bio-based materials
Answer and working

C. Heat and electricity

Energy uses (heat, power) are high in volume and low in value per tonne and form the base; pharmaceuticals and fine chemicals sit at the narrow top, with food, feed and materials between.

Question 4 · easy

Which town is the classic example of industrial symbiosis, with a power station, refinery, plasterboard factory and pharmaceutical plant exchanging by-products?

  1. Rotterdam, Netherlands
  2. Gothenburg, Sweden
  3. Kalundborg, Denmark
  4. Hamburg, Germany
Answer and working

C. Kalundborg, Denmark

Kalundborg's symbiosis grew from bilateral exchanges from the 1970s: steam, heat, gypsum, fly ash, water and fermentation biomass. The other cities are major ports and industrial centres but not the textbook case.

Question 5 · hard

Which lesson from Kalundborg and later planned eco-industrial parks is best supported?

  1. Symbiosis works best when a government designs the entire park before any firm arrives on the site
  2. Symbiosis succeeds only among firms of the same industrial sector and size
  3. Symbiosis requires that every firm be owned by a single parent company
  4. Symbiosis needs trust, proximity, stable by-product quality and supportive waste regulation
Answer and working

D. Symbiosis needs trust, proximity, stable by-product quality and supportive waste regulation

Kalundborg grew from bilateral business deals; many top-down planned parks struggled. Success factors include trust, short distances, reliable quality and rules that let by-products be used without being treated as waste. Diversity of sectors helps, and ownership is varied.

Question 6 · hard

What do life cycle assessments of bio-based plastics most often show compared with fossil equivalents?

  1. Lower fossil resource use, but higher eutrophication, acidification and land use from crop production
  2. Lower impacts in every category, because biogenic carbon makes them carbon negative over their entire life cycle
  3. Higher fossil resource use, because fermentation consumes more oil than polymerisation
  4. Identical impacts, because the polymer chemistry is the same once the plastic is made
Answer and working

A. Lower fossil resource use, but higher eutrophication, acidification and land use from crop production

Reviews find trade-offs: savings in fossil resources and often fossil GHG, against higher agricultural impacts, with results sensitive to feedstock, land-use change and end-of-life. They are not better in every category, nor uniformly worse on fossil use.

Question 7 · hard

Which standard pair defines eco-design as integrating environmental aspects into product design to reduce adverse impacts over the life cycle?

  1. ISO 9001 and ISO 45001
  2. ISO 14064 and ISO 14065
  3. ISO 50001 and ISO 14031
  4. ISO 14006 and IEC 62430
Answer and working

D. ISO 14006 and IEC 62430

ISO 14006 (eco-design within environmental management systems) and IEC 62430 (environmentally conscious design) define eco-design. ISO 9001 and 45001 cover quality and safety; ISO 14064/14065 GHG accounting and verification; ISO 50001 energy management and ISO 14031 performance evaluation.

Question 8 · medium

Which ISO standard, published in 2024, gives requirements and guidance for measuring and assessing circularity performance?

  1. ISO 59020
  2. ISO 59004
  3. ISO 14001
  4. ISO 26000
Answer and working

A. ISO 59020

ISO 59020 covers measuring circularity; ISO 59004 gives vocabulary, principles and implementation guidance, and ISO 59010 business-model guidance. ISO 14001 is environmental management systems and ISO 26000 social responsibility guidance.

Question 9 · medium

Which order follows the food waste hierarchy from most to least preferred for surplus bread at a bakery?

  1. Compost, digest, use as animal feed, donate to food banks, prevent overproduction
  2. Prevent overproduction, donate to food banks, use as animal feed where legal, digest or compost
  3. Incinerate with energy recovery, donate to food banks, prevent overproduction, then compost the remaining crusts
  4. Donate to food banks, landfill, prevent overproduction, use as animal feed where legal
Answer and working

B. Prevent overproduction, donate to food banks, use as animal feed where legal, digest or compost

Prevention comes first, then redistribution to people, then feed (bread is allowed as former foodstuff in many countries), then industrial uses and digestion or composting, and last disposal. The other orders invert or scramble the hierarchy.

Question 10 · medium

Design for disassembly favours which choice?

  1. Permanent adhesives rather than screws
  2. Screws and snap-fits rather than permanent adhesives
  3. Welding dissimilar metals together
  4. Over-moulding electronics into plastic housings
Answer and working

B. Screws and snap-fits rather than permanent adhesives

Reversible fasteners allow repair, part harvesting and material separation. Adhesives, welding of dissimilar materials and over-moulding make separation costly or impossible.

A study plan for Circular Economy & Bio-based Resources in UGC NET

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (51% of the 53 questions): Material flow analysis and resource-efficiency metrics (8, 15%); Linear versus circular economy; the butterfly diagram (7, 13%); Bio-based and biodegradable materials: claims and evidence (6, 11%); Food waste valorisation and biorefineries (6, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Industrial ecology and industrial symbiosis (6, 11%); Circularity indicators and policies (5, 9%); Extended producer responsibility and eco-design (5, 9%); Cascading use of biomass (3, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Circular business models (3, 6%); Biological and technical cycles (2, 4%); Circular agriculture: nutrient and carbon recycling (2, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Biological and technical cycles (1 hard of 2), Circular business models (1 hard of 3), Material flow analysis and resource-efficiency metrics (2 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Cascading use of biomass (2 easy of 3); Food waste valorisation and biorefineries (3 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — UGC NET Circular Economy & Bio-based Resources

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.