State Forest Service Stand Tending, Thinning & Pruning: practice questions
State Forest Service — Assistant Conservator of Forests (state PSC exams) · India · State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC)
Original practice questions written to the published syllabus · not past papers
10worked here, free
24written to this exam in this subject
10syllabus units
About State Forest Service
State Forest Service — Assistant Conservator of Forests (state PSC exams) is a government recruitment exam run by State Public Service Commissions (e.g. TNPSC, MPPSC, UPPSC, HPPSC, KPSC, MPSC), for candidates in India. Typically a preliminary objective paper, a written main examination including forestry or science optional papers, and an interview, plus physical tests.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Stand Tending, Thinning & Pruning in State Forest Service
Short notes on weeding, cleaning, climber cutting, thinning grades A to D, pruning, girdling and plantation journals.
The intermediate treatments between regeneration and harvest that shape a stand's growth, quality and health.
Our 24 State Forest Service questions in this subject: 7 easy, 12 medium, 5 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to State Forest Service and are not shown on any other exam's page.
Question 1 · easy
Which pattern of weeding clears a circle around each planted seedling only?
Complete weeding
Strip weeding
Ring or spot weeding
Line clearing
Answer and working
C. Ring or spot weeding
Ring (spot) weeding clears a circle, often about a metre across, around each plant. Complete weeding clears the whole area; strip weeding clears bands along the planting lines.
Question 2 · medium
How is a woody climber usually cut during climber cutting?
Only at the top of the host crown, pulling the whole climber down to the ground at once, which usually saves time
Only by burning the host tree's base so that the climber dies with the host tree
Near the ground and again about a metre up, removing the cut section so the hanging part cannot root
By wrapping the climber more tightly around the host so that it strangles itself
Answer and working
C. Near the ground and again about a metre up, removing the cut section so the hanging part cannot root
Two cuts with the section removed prevent re-rooting; the upper part is left to die rather than being pulled down, which would damage the crown. Burning or tightening the climber would harm the tree.
Question 3 · medium
Why is complete eradication of climbers not usually the aim in natural forest?
Climbers have no effect on tree growth in any natural forest type, so cutting is wasted effort and money for the division
Climbers are protected by law in every country, so they may never be cut in any forest
Lianas contribute to diversity, food supply and wildlife structure; cutting targets crop trees and harvest areas
Climbers disappear on their own within one year after any logging operation
Answer and working
C. Lianas contribute to diversity, food supply and wildlife structure; cutting targets crop trees and harvest areas
Lianas are part of natural forest ecology; cutting is targeted at crop and future crop trees and around harvesting. They do affect tree growth, are not universally protected, and increase after logging.
Question 4 · easy
Ordinary (low) thinning removes trees mainly from:
The lower crown classes: dead, dying, suppressed and dominated trees
The upper crown classes: the largest dominants competing with each other
Fixed rows chosen without regard to crown class or condition
Only the trees growing along the boundary of the compartment
Answer and working
A. The lower crown classes: dead, dying, suppressed and dominated trees
Low thinning (thinning from below) works up from the lowest crown classes. Removing dominants is crown or selection thinning; fixed rows is mechanical thinning.
Question 5 · easy
Which tree should usually be favoured when marking a thinning?
A healthy, well-formed dominant or codominant stem
A suppressed stem with a small, thin crown
A forked dominant with a broken leader
A diseased codominant with a cankered stem
Answer and working
A. A healthy, well-formed dominant or codominant stem
Marking favours healthy, well-formed upper-canopy trees and removes damaged, diseased and badly formed ones.
Question 6 · easy
Improvement fellings are often combined with selection fellings in Indian tropical forests under the:
Selection-cum-improvement system
Uniform shelterwood system
Coppice-with-standards system
Clear-felling system with taungya
Answer and working
A. Selection-cum-improvement system
Selection-cum-improvement combines harvesting mature trees with removing defective and unwanted ones. The other systems are regeneration systems without this combination.
Question 7 · easy
In pruning, the lift is:
The number of trees pruned per hectare
The weight of branches removed per tree
The angle of the pruning saw to the stem
The height to which the stem is pruned in one operation
Answer and working
D. The height to which the stem is pruned in one operation
A lift is the height pruned in one operation; regimes use several lifts.
Question 8 · medium
Which method of competition control kills roots as well as shoots, but faces increasing restriction?
Manual slashing with brush saws
Chemical herbicides
Mechanical rolling between rows
Grazing by sheep under supervision
Answer and working
B. Chemical herbicides
Herbicides can kill roots, preventing resprouting, but are restricted by law, public concern and certification. Slashing and rolling leave roots; grazing removes shoots.
Question 9 · medium
Which is the most reliable way to confirm that fertilising a stand will pay?
Visual inspection of bark colour from a distance by an experienced forest guard
Field trials that measure growth response, supported by foliar analysis
The price of fertiliser in the local market
The age of the oldest tree in the stand
Answer and working
B. Field trials that measure growth response, supported by foliar analysis
Foliar analysis against critical levels and especially field trials show whether a nutrient is limiting and how much growth responds. Bark colour, price and age do not diagnose deficiency.
Question 10 · easy
After thinning, the main growth response of the remaining trees is:
Increased height growth of all suppressed trees to the top of the canopy
Immediate production of seed by every tree
Loss of all lower branches within a month
Faster diameter growth as crowns expand
Answer and working
D. Faster diameter growth as crowns expand
Released trees expand their crowns and grow faster in diameter. Height growth of dominants changes little; seeding and branch loss are not direct responses.
A study plan for Stand Tending, Thinning & Pruning in State Forest Service
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (50% of the 24 questions): Improvement felling and salvage cutting (3, 13%); Thinning grades and thinning schedules (3, 13%); Thinning methods: mechanical, ordinary (low), crown, selection (3, 13%); Thinning: objectives and effects on growth (3, 13%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Weeding and cleaning (3, 13%); Climber cutting (2, 8%); Fertilisation of established stands (2, 8%); Girdling and other stand-improvement methods (2, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Pruning: natural and artificial; timing and lift (2, 8%); Release treatments and competition control (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Fertilisation of established stands (1 hard of 2), Improvement felling and salvage cutting (1 hard of 3), Thinning grades and thinning schedules (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Thinning methods: mechanical, ordinary (low), crown, selection (2 easy of 3); Pruning: natural and artificial; timing and lift (1 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.