ICAR AICE-JRF/SRF Stand Tending, Thinning & Pruning: practice questions
ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
19written to this exam in this subject
10syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 2 hours, 120 MCQs (Part A 20 general; Part B 50 core group; Part C 50 subject), +4 / −1, maximum 480.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Stand Tending, Thinning & Pruning in ICAR AICE-JRF/SRF
Definitions and distinctions among weeding, cleaning, climber cutting, mechanical, ordinary, crown and selection thinning, improvement felling, pruning and girdling; thinning grades; effects of thinning on growth; stand density measures.
The intermediate treatments between regeneration and harvest that shape a stand's growth, quality and health.
Our 19 ICAR AICE-JRF/SRF questions in this subject: 2 easy, 7 medium, 10 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
When is weeding most valuable in seasonally dry tropical plantations?
Immediately after the dry season ends, when weeds are dormant and easy to cut
Before the dry season, so that the crop has the remaining soil moisture to itself
Only in the year of final felling, to make extraction of logs easier for crews working in the stand
Only once per rotation, at the time of the first commercial thinning
Answer and working
B. Before the dry season, so that the crop has the remaining soil moisture to itself
Weeds, especially grasses, compete hardest for water; removing them before the dry season helps seedlings survive drought. Weeding near felling or once per rotation misses the critical establishment years.
Question 2 · medium
Why do heavy canopy openings from logging, fire or grazing often increase climber problems?
Climbers need full shade and so move into the darkest remaining patches
Canopy openings remove all climber seeds from the soil seed bank
Climbers respond strongly to increased light and disturbance
Logging machinery spreads climber pollen, which kills crop seedlings
Answer and working
C. Climbers respond strongly to increased light and disturbance
Most climbers are light-demanding and thrive after disturbance; tending that keeps the canopy reasonably closed reduces them. The other explanations are false.
Question 3 · medium
Langsaeter's curve states that, over a wide middle range of stand density:
Gross volume increment rises in direct proportion to tree number
Height growth usually falls linearly as density rises
Roughly constant gross increment per ha
Mortality is zero whatever the stand density
Answer and working
C. Roughly constant gross increment per ha
Langsaeter's generalisation is a plateau of gross increment over a wide density range, falling at very low (and slightly at very high) densities. It says nothing of proportional increase, linear height decline or zero mortality.
Question 4 · hard
Using Reineke's SDI = N × (Dq/25.4)^1.605, what is the SDI of a stand with 900 trees/ha and a quadratic mean diameter of 30 cm?
About 1,063
About 1,176
About 900
About 762
Answer and working
B. About 1,176
(30 ÷ 25.4)^1.605 = 1.181^1.605 = 1.306; 900 × 1.306 = 1,176. 1,063 uses a linear ratio (900 × 1.181); 900 is N alone; 762 inverts the ratio and drops the exponent (900 × 25.4 ÷ 30).
Question 5 · hard
The removed trees in a thinning average 18 cm diameter and the stand averaged 24 cm before thinning. What is the thinning ratio d/D and the type of thinning?
1.33, a crown thinning
0.75, a crown thinning
1.33, a low thinning
0.75, a low thinning
Answer and working
D. 0.75, a low thinning
d/D = 18 ÷ 24 = 0.75; a ratio below 1 means smaller trees were removed, typical of low thinning. 1.33 inverts the ratio (24 ÷ 18).
Question 6 · hard
How does sanitation cutting differ from salvage cutting?
Sanitation removes only healthy trees; salvage removes only trees of unwanted species in mixed natural forests of the tropics and subtropics
Sanitation is done only in nurseries; salvage is done only in mangroves
Sanitation removes infested or susceptible trees to protect the stand; salvage recovers value from trees already killed or damaged
Sanitation is a type of pruning; salvage is a type of weeding
Answer and working
C. Sanitation removes infested or susceptible trees to protect the stand; salvage recovers value from trees already killed or damaged
The purposes differ: protection versus value recovery, though they often overlap. The other contrasts are false.
Question 7 · easy
Green pruning differs from dry pruning in that it:
Removes dead branches only
Removes live branches and so reduces leaf area and possibly growth
Is done only with chemical sprays
Is done only on seedlings in the nursery before they are lifted and graded for planting
Answer and working
B. Removes live branches and so reduces leaf area and possibly growth
Green pruning removes living branches; taken too far it reduces growth. Dry pruning removes dead branches.
Question 8 · hard
Why may simple girdling fail on some species?
They sprout from the stump or roots, or bridge narrow girdles with callus
Their bark is too thin to be cut with an axe
Their roots do not need sugars from the crown because they photosynthesise below ground
They lack a cambium layer entirely
Answer and working
A. They sprout from the stump or roots, or bridge narrow girdles with callus
Sprouting and callus bridging defeat simple girdles; wider or double girdles or frill girdling with herbicide are used. All trees have cambium and roots that need sugars.
Question 9 · easy
Boron deficiency in pines on some soils is associated with:
Leader dieback and stem deformity
Excessively fast height growth
Doubling of cone production
Thicker bark at breast height
Answer and working
A. Leader dieback and stem deformity
Boron deficiency causes dieback of leaders and deformed, multi-stemmed trees in pines on some soils.
Question 10 · medium
Why do improvement, salvage and sanitation fellings need clear rules in the working plan?
They are outside the regular yield-table sequence, so removals, regeneration and retention must be specified
They are always illegal unless approved by a court of law in each case before any tree is felled by the forest officer
They can only be done by private contractors from outside the division
They produce no timber and so cannot be recorded in any register
Answer and working
A. They are outside the regular yield-table sequence, so removals, regeneration and retention must be specified
Because these fellings are irregular, the plan must say which trees may go, how removals count against the cut, and how sites are regenerated. The other statements are false.
A study plan for Stand Tending, Thinning & Pruning in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (42% of the 19 questions): Climber cutting (2, 11%); Fertilisation of established stands (2, 11%); Girdling and other stand-improvement methods (2, 11%); Improvement felling and salvage cutting (2, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Pruning: natural and artificial; timing and lift (2, 11%); Thinning grades and thinning schedules (2, 11%); Thinning methods: mechanical, ordinary (low), crown, selection (2, 11%); Thinning: objectives and effects on growth (2, 11%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Weeding and cleaning (2, 11%); Release treatments and competition control (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Girdling and other stand-improvement methods (2 hard of 2), Climber cutting (1 hard of 2), Fertilisation of established stands (1 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Fertilisation of established stands (1 easy of 2); Pruning: natural and artificial; timing and lift (1 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.