ICAR AIEEA-PG Chemistry of Dairy Products: practice questions
ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
89written to this exam in this subject
12syllabus units
About ICAR AIEEA-PG
ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) is a postgraduate admission exam run by NTA for ICAR, for candidates in India. Computer-based, 2 hours, 120 multiple-choice questions, +4 for a correct answer and −1 for a wrong one (2026 bulletin). One paper per major subject group.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Chemistry of Dairy Products in ICAR AIEEA-PG
Chemistry of cream, butter, ghee, ice cream, cheese, condensed and dried milks and infant food; ghee spoilage and antioxidants; fermentation and rennet chemistry; changes in milk powder during storage; indigenous products.
Physical and chemical changes in milk as it becomes cream, butter, ghee, concentrated and dried milks, cheese, fermented milks and frozen desserts.
Our 89 ICAR AIEEA-PG questions in this subject: 30 easy, 48 medium, 11 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.
Question 1 · easy
Age gelation is a storage defect mainly of:
UHT milk and UHT concentrated products
Fresh pasteurised milk held for two days
Ghee stored in tin containers
Butter held in cold storage
Answer and working
A. UHT milk and UHT concentrated products
UHT products thicken and gel during weeks to months of ambient storage.
Question 2 · easy
Why is sour cream partly neutralised before pasteurisation for butter or ghee?
To remove carotene and make the butter whiter
To prevent curdling on heating and reduce fat loss
To raise the lactose content so the cream churns faster
To increase the iodine value of the fat
Answer and working
B. To prevent curdling on heating and reduce fat loss
Acid cream curdles on heating, trapping fat, and salted butter from very acid cream develops off-flavours.
Question 3 · easy
In the pre-stratification method of ghee making, butter is first held at about:
40 degrees Celsius
120 degrees Celsius
4 degrees Celsius
80 degrees Celsius
Answer and working
D. 80 degrees Celsius
At about 80 C, melted butter separates and the lower serum layer is drained before final clarification.
Question 4 · hard
Ghee made by the direct cream method compared with the creamery butter method usually has:
Less phospholipid and no residue at all
More phospholipid and more residue, with longer heating
More moisture, about 5 per cent
Exactly the same composition and flavour, because the fat is identical
Answer and working
B. More phospholipid and more residue, with longer heating
Heating cream directly brings more non-fat solids and phospholipid into contact with the fat.
Question 5 · medium
What gives traditional ghee its granular texture?
Slow cooling
Rapid chilling to below 0 degrees Celsius
Addition of sugar during clarification
Residual casein forming lumps in the fat
Answer and working
A. Slow cooling
Slow cooling at moderate temperatures favours large crystal aggregates.
Question 6 · medium
What does a high C/P ratio of a coagulant mean?
High coagulation pH relative to ripening pH
High casein content relative to protein
High clotting activity relative to general proteolysis
High calcium relative to phosphate
Answer and working
C. High clotting activity relative to general proteolysis
A high clotting-to-proteolysis ratio gives good yield and less bitterness.
Question 7 · easy
Which coagulant is now the most widely used in cheesemaking?
Papain
Calf rennet extracted from abomasa
Pig pepsin from slaughterhouses
Fermentation-produced chymosin
Answer and working
D. Fermentation-produced chymosin
Chymosin produced by microorganisms carrying the gene is widely used.
Question 8 · medium
Which coagulant is noted for very specific kappa-casein cleavage with little general proteolysis?
Rhizomucor miehei protease
Cryphonectria parasitica protease
Camel chymosin
Bovine pepsin
Answer and working
C. Camel chymosin
Camel chymosin has a high C/P ratio; mould proteases are more proteolytic.
Question 9 · hard
In Camembert, why does the cheese soften from the surface inward?
Lactose crystallises at the centre first
Penicillium camemberti oxidises lactate at the surface, raising pH and creating a gradient
Salt diffuses inward and dissolves the protein
The rind is coated with extra rennet that diffuses slowly inward and liquefies the paste as it goes
Answer and working
B. Penicillium camemberti oxidises lactate at the surface, raising pH and creating a gradient
Lactate oxidation and ammonia raise surface pH; proteolysis and calcium phosphate movement soften the paste.
Question 10 · medium
Which agent in Dutch-type cheeses produces the small round openings?
Clostridia producing hydrogen
Moulds producing ammonia
Citrate-fermenting lactococci and leuconostocs producing CO2
Propionibacteria producing CO2 from lactate in the warm ripening room
Answer and working
C. Citrate-fermenting lactococci and leuconostocs producing CO2
Citrate fermentation gives CO2 and diacetyl, forming small eyes.
A study plan for Chemistry of Dairy Products in ICAR AIEEA-PG
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (36% of the 89 questions): Changes during cheese ripening: glycolysis, proteolysis, lipolysis (8, 9%); Chemistry of cream: neutralisation and ripening (8, 9%); Chemistry of milk fermentation and flavour compounds (8, 9%); Chemistry of rennet coagulation (8, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Ice cream: structure and role of stabilisers and emulsifiers (8, 9%); Mechanism of churning and butter microstructure (8, 9%); Milk powders: structure, solubility and instant properties (8, 9%); Concentrated milks: physico-chemical changes in manufacture and storage (7, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Heat stability of milk and the heat coagulation time (7, 8%); Heat-desiccated and acid-coagulated products: khoa, chhana, paneer (7, 8%); Age gelation of UHT milk (6, 7%); Ghee: composition by method, analytical constants, flavour and deterioration (6, 7%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Changes during cheese ripening: glycolysis, proteolysis, lipolysis (2 hard of 8), Ice cream: structure and role of stabilisers and emulsifiers (2 hard of 8), Age gelation of UHT milk (1 hard of 6).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Mechanism of churning and butter microstructure (5 easy of 8); Age gelation of UHT milk (3 easy of 6).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.