ICAR AICE-JRF/SRF Chemistry of Dairy Products: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
87written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Chemistry of Dairy Products in ICAR AICE-JRF/SRF
Chemistry of cream, butter and ghee; heat stability, concentrated and dried milks, khoa, chhana and paneer; chemistry of cheese and fermented milks; ice cream. Questions test mechanisms such as churning, age gelation, rennet coagulation, ripening reactions, diacetyl formation and emulsifier action, and their links to defects.
Physical and chemical changes in milk as it becomes cream, butter, ghee, concentrated and dried milks, cheese, fermented milks and frozen desserts.
Our 87 ICAR AICE-JRF/SRF questions in this subject: 14 easy, 48 medium, 25 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
Why does the alcohol test give a quick indication of heat stability?
Alcohol and heat both hydrolyse lactose at the same rate
Both depend on ionic calcium and the stability of casein micelles
Both measure the fat content of the milk sample
Alcohol inactivates plasmin, which is the main cause of heat coagulation in milk
Answer and working
B. Both depend on ionic calcium and the stability of casein micelles
Destabilised micelles with high ionic calcium flocculate at lower ethanol concentrations and coagulate sooner on heating.
Question 2 · medium
Above about pH 6.7, heating milk causes which change in kappa-casein that contributes to instability?
Cleavage at Phe105-Met106 by heat alone without enzyme
Conversion into alpha-s1-casein by isomerisation
Dissociation from the micelles
Crystallisation as calcium kappa-caseinate on the tube wall
Answer and working
C. Dissociation from the micelles
Kappa-casein (with denatured beta-lactoglobulin) leaves the micelles at higher pH, leaving micelles depleted of their stabilising layer.
Question 3 · hard
Why is cultured (ripened-cream) butter usually unsalted or lightly salted?
Salt raises the pH and makes cultured butter taste flat
Salt crystallises with lactic acid and makes the butter gritty
Salt kills the culture and stops diacetyl formation in the butter
Low pH with salt promotes oxidation and off-flavours in storage
Answer and working
D. Low pH with salt promotes oxidation and off-flavours in storage
Acidic, salted butter oxidises readily, giving fishy and tallowy flavours.
Question 4 · medium
Salted butter contains 1.8 per cent salt and 16 per cent water. What is its salt in moisture?
About 11.3 per cent
About 10.1 per cent
About 1.8 per cent
About 17.8 per cent
Answer and working
B. About 10.1 per cent
Salt in moisture = 1.8/(1.8 + 16) x 100 = 10.1%. 11.3 divides salt by water alone.
Question 5 · hard
Why does ghee clarified at a higher temperature usually have better keeping quality?
Higher temperature raises the moisture content, which dilutes the oxidants in the fat
Higher temperature removes all unsaturated fatty acids
More phospholipid passes into the fat and Maillard products act as antioxidants
Higher temperature converts cholesterol into tocopherol
Answer and working
C. More phospholipid passes into the fat and Maillard products act as antioxidants
Phospholipids and browning products from the residue are natural antioxidants.
Question 6 · medium
Free fat in whole milk powder:
Is fat dissolved in the lactose glass
Is fat that has been removed by skimming before the milk was concentrated
Improves the wettability of the powder
Lies at or near the particle surface and promotes oxidation
Answer and working
D. Lies at or near the particle surface and promotes oxidation
Surface free fat is exposed to oxygen and makes powder hard to wet.
Question 7 · medium
Residual chymosin in cheese first hydrolyses which bond, producing alpha-s1-I-casein?
Lys28-Lys29 of beta-casein
Phe105-Met106 of kappa-casein
Phe23-Phe24 of alpha-s1-casein
Leu192-Tyr193 of beta-casein
Answer and working
C. Phe23-Phe24 of alpha-s1-casein
Chymosin cleaves alpha-s1-casein at Phe23-Phe24 early in ripening, softening texture. Lys28-Lys29 is a plasmin site.
Question 8 · hard
Why is plasmin especially important in ripening of cheeses cooked at high temperatures?
Cooking activates chymosin, which then produces plasmin
Cooking destroys the starter, leaving only plasmin
Cooking adds plasmin from the whey
Cooking inactivates most coagulant but not plasmin
Answer and working
D. Cooking inactivates most coagulant but not plasmin
High cook temperatures denature much of the coagulant; plasmin remains active.
Question 9 · medium
Why does yoghurt contain free galactose?
Galactose is added as a sweetener
Galactose forms from lactic acid
Lactose is hydrolysed slowly by lactic acid during cold storage of the yoghurt
Many strains use only the glucose half of lactose and excrete galactose
Answer and working
D. Many strains use only the glucose half of lactose and excrete galactose
Galactose-negative S. thermophilus and L. bulgaricus excrete galactose.
Question 10 · easy
Which structural element of ice cream stabilises the air cells and gives melt resistance?
Large lactose crystals
Ice crystals above 100 micrometres
Dissolved sucrose
The partially coalesced fat network
Answer and working
D. The partially coalesced fat network
Partially coalesced fat surrounds air cells.
A study plan for Chemistry of Dairy Products in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (38% of the 87 questions): Changes during cheese ripening: glycolysis, proteolysis, lipolysis (9, 10%); Chemistry of cream: neutralisation and ripening (8, 9%); Chemistry of rennet coagulation (8, 9%); Ice cream: structure and role of stabilisers and emulsifiers (8, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Milk powders: structure, solubility and instant properties (8, 9%); Chemistry of milk fermentation and flavour compounds (7, 8%); Concentrated milks: physico-chemical changes in manufacture and storage (7, 8%); Heat-desiccated and acid-coagulated products: khoa, chhana, paneer (7, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Mechanism of churning and butter microstructure (7, 8%); Age gelation of UHT milk (6, 7%); Ghee: composition by method, analytical constants, flavour and deterioration (6, 7%); Heat stability of milk and the heat coagulation time (6, 7%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Age gelation of UHT milk (3 hard of 6), Changes during cheese ripening: glycolysis, proteolysis, lipolysis (4 hard of 9), Ice cream: structure and role of stabilisers and emulsifiers (3 hard of 8).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Mechanism of churning and butter microstructure (3 easy of 7); Milk powders: structure, solubility and instant properties (2 easy of 8).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.