ICAR AICE-JRF/SRF Advanced Dairy Technology & Product Development: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
101written to this exam in this subject
10syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Advanced Dairy Technology & Product Development in ICAR AICE-JRF/SRF
Graduate-level processing science and product development, as examined in ICAR AICE subject 37.
Our 101 ICAR AICE-JRF/SRF questions in this subject: 2 easy, 83 medium, 16 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
Agglomerated milk powders reconstitute faster mainly because they:
They contain no protein at all on the particle surface after agglomeration
Are dried at a higher outlet temperature
Porous, larger particles wet easily
Have more free fat on their surface
Answer and working
C. Porous, larger particles wet easily
Porous agglomerates let water penetrate; lecithin coating helps fat-containing powders.
Question 2 · hard
Using Raoult's law, what is the water activity of a solution of 1 mol of sucrose in 1 kg of water (55.6 mol water)?
0.982
0.964
0.500
0.018
Answer and working
A. 0.982
aw = 55.6/(55.6 + 1) = 0.982. Sucrose does not ionise, so it is not counted twice.
Question 3 · medium
Dairy products generally have low to moderate glycaemic index mainly because:
They contain no carbohydrate at all, apart from added sugar in flavoured products
Fat blocks all sugar absorption
Slow lactose absorption and protein effects
Calcium destroys glucose
Answer and working
C. Slow lactose absorption and protein effects
Lactose and dairy proteins moderate glycaemic response.
Question 4 · medium
Fat-soluble vitamins A and D are usually added to milk:
As crystals after packaging
As emulsions before homogenisation
Only to the cream after separation
Dissolved in ethanol after filling
Answer and working
B. As emulsions before homogenisation
Emulsified concentrates dosed before homogenisation distribute evenly.
Question 5 · medium
Complex coacervation for encapsulation uses:
Only high-temperature spray drying of the oil without any wall material
Ethanol precipitation of lactose
Freezing in liquid nitrogen
Charged proteins and polysaccharides
Answer and working
D. Charged proteins and polysaccharides
Charge interactions between, for example, gelatin or whey protein and gum arabic form a wall around oil droplets.
Question 6 · medium
Turmeric and chilli products used in dairy foods need authenticity checks mainly because of:
Natural lactose content
Casein contamination
Excess vitamin C
Illegal dye adulteration
Answer and working
D. Illegal dye adulteration
Valuable spices are adulterated with colourants and fillers.
Question 7 · medium
The characteristic flavour of blue cheese comes largely from methyl ketones produced by:
Lactococcus lactis
Propionibacterium
Penicillium roqueforti
Kluyveromyces
Answer and working
C. Penicillium roqueforti
β-Oxidation and decarboxylation of fatty acids give 2-heptanone and related ketones.
Question 8 · medium
Which yeast ferments whey lactose directly to ethanol?
Saccharomyces cerevisiae without lactase
Debaryomyces hansenii
Kluyveromyces marxianus
Candida albicans
Answer and working
C. Kluyveromyces marxianus
It has lactose permease and β-galactosidase; S. cerevisiae needs hydrolysed lactose.
Question 9 · medium
A yoghurt that cools fast in a pilot tank becomes too acidic in a large tank mainly because:
Cooling through walls is slower at scale
Large tanks contain more lactose per litre
Cultures die faster in large tanks
Stirring adds acid
Answer and working
A. Cooling through walls is slower at scale
Lower area per volume extends cooling; plate coolers are used at scale.
Question 10 · medium
A Box–Behnken design for three factors with three centre points has how many runs?
20
8
27
15
Answer and working
D. 15
12 edge midpoints + 3 centre points = 15; a CCD with six centre points has 20; 27 is a 3³ factorial.
A study plan for Advanced Dairy Technology & Product Development in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (41% of the 101 questions): Product development using response surface methodology (11, 11%); Advances in concentration and drying (10, 10%); Alcoholic dairy beverages (10, 10%); Bio-sweeteners and bio-flavours (10, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Fortification techniques: minerals, vitamins, fibre (10, 10%); Functional food design for specific populations (10, 10%); Herbs and phytochemicals in dairy foods (10, 10%); Reduced-fat, reduced-sugar and reduced-sodium dairy products (10, 10%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Scale-up from pilot plant to factory (10, 10%); Sorption behaviour and control of water activity (10, 10%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Advances in concentration and drying (2 hard of 10), Alcoholic dairy beverages (2 hard of 10), Fortification techniques: minerals, vitamins, fibre (2 hard of 10).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Scale-up from pilot plant to factory (1 easy of 10); Sorption behaviour and control of water activity (1 easy of 10).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.