ICAR AICE-JRF/SRF Microbiological Quality Assurance & Rapid Methods: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
76written to this exam in this subject
10syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
In routine dairy practice, biosensors are most established for:
Antibiotic residues and somatic cell or mastitis detection
Detection of single Listeria cells in 25 g without enrichment
Accreditation of laboratories
Replacement of all reference methods
Answer and working
A. Antibiotic residues and somatic cell or mastitis detection
Most pathogen biosensors remain in research because of matrix effects and low target numbers.
Question 9 · medium
Most routine environmental samples are usually taken from zones 2 and 3 because:
Zones 2 and 3 are easier to clean and sanitise than food-contact surfaces
Zone 1 sampling is forbidden
They warn early, before zone 1 is contaminated
These zones never contain Listeria
Answer and working
C. They warn early, before zone 1 is contaminated
The aim is to find harbourage before it reaches product contact surfaces.
Question 10 · medium
The WHO Laboratory Biosafety Manual, 4th edition (2020), emphasises:
Fixed lab grades only
Testing only in BSL-4
Local risk assessment
Removing all PPE
Answer and working
C. Local risk assessment
Controls are chosen from an assessment of agents and procedures rather than a fixed level alone.
A study plan for Microbiological Quality Assurance & Rapid Methods in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (51% of the 76 questions): Laboratory accreditation: ISO/IEC 17025 (10, 13%); Rapid methods: ATP bioluminescence, PCR, real-time PCR, immunoassays (10, 13%); Two- and three-class sampling plans (10, 13%); Biosensors in dairy safety (9, 12%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Environmental monitoring programmes (9, 12%); Detection and isolation of pathogens (8, 11%); Biosafety levels and good microbiological practice (7, 9%); Microbiological criteria and how they are set (6, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Standard plate count and other enumeration methods (4, 5%); Indicator organisms: coliforms, Enterobacteriaceae, E. coli (3, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Indicator organisms: coliforms, Enterobacteriaceae, E. coli (3 hard of 3), Standard plate count and other enumeration methods (2 hard of 4), Detection and isolation of pathogens (3 hard of 8).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Rapid methods: ATP bioluminescence, PCR, real-time PCR, immunoassays (3 easy of 10); Biosafety levels and good microbiological practice (2 easy of 7).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.