LAISHA
Open Laisha

ICAR AIEEA-PG Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants: practice questions

ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) · India · NTA for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
79written to this exam in this subject
11syllabus units

About ICAR AIEEA-PG

ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) is a postgraduate admission exam run by NTA for ICAR, for candidates in India. Computer-based, 2 hours, 120 multiple-choice questions, +4 for a correct answer and −1 for a wrong one (2026 bulletin). One paper per major subject group.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants in ICAR AIEEA-PG

Fluid properties, pumping, thermodynamics and heat transfer worked as dairy plant problems.

Our 79 ICAR AIEEA-PG questions in this subject: 12 easy, 64 medium, 3 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.

Question 1 · medium

In Bernoulli's equation written in head form, the term v²/2g represents:

  1. Velocity head
  2. Pressure head
  3. Elevation head
  4. Friction head
Answer and working

A. Velocity head

p/ρg is pressure head, z elevation head, v²/2g velocity head; friction losses are added for real flow.

Question 2 · easy

Pipe flow is generally laminar when the Reynolds number is below about:

  1. 21,000
  2. 2,100
  3. 210
  4. 100,000
Answer and working

B. 2,100

Below about 2,100–2,300 laminar; above about 4,000 turbulent.

Question 3 · medium

The minimum velocity commonly recommended for cleaning-in-place of dairy pipelines is about:

  1. 1.5 m/s
  2. 0.1 m/s
  3. 10 m/s
  4. 0.5 m/s
Answer and working

A. 1.5 m/s

Turbulent wall shear at about 1.5 m/s or more removes deposits.

Question 4 · medium

By the affinity laws, halving the speed of a centrifugal pump reduces its power demand to about:

  1. One half
  2. One quarter
  3. One eighth
  4. Unchanged
Answer and working

C. One eighth

Power ∝ N³: 0.5³ = 0.125. Head ∝ N² (one quarter); flow ∝ N (one half).

Question 5 · medium

Air left in a steam sterilising chamber is harmful mainly because:

  1. It raises the steam's latent heat and so overheats the load
  2. It condenses faster than steam
  3. It lowers the temperature at that pressure
  4. It increases the dryness fraction
Answer and working

C. It lowers the temperature at that pressure

The temperature depends on steam partial pressure; air pockets give cold spots.

Question 6 · medium

Which heat exchanger type is most used for UHT treatment of products with fibres or particles?

  1. Gasketed plate
  2. Air-cooled finned
  3. Shell-less spiral of plastic
  4. Tubular
Answer and working

D. Tubular

Tubular exchangers tolerate high pressure and particles; narrow plate gaps would block.

Question 7 · medium

The Prandtl number is defined as:

  1. c_pμ/k
  2. hL/k
  3. ρvD/μ
  4. αt/L²
Answer and working

A. c_pμ/k

Pr = c_pμ/k; hL/k is Nu; ρvD/μ is Re; αt/L² is the Fourier number.

Question 8 · medium

Which dimensionless number is used to characterise natural convection?

  1. Reynolds
  2. Grashof
  3. Fourier
  4. Euler
Answer and working

B. Grashof

Gr = gβΔTL³/ν² measures buoyancy against viscosity.

Question 9 · medium

How much 40% fat cream must be removed from 10,000 kg of milk at 4.2% fat to standardise it to 3.5% fat?

  1. 175.0 kg
  2. 191.8 kg
  3. 70 kg
  4. 383.6 kg
Answer and working

B. 191.8 kg

Fat: 420 = 0.40C + 0.035(10,000 − C) → 70 = 0.365C → C = 191.8 kg. Ignoring the fat left in the standardised milk gives 175 kg.

Question 10 · easy

10,000 kg/h of skim milk at 9% total solids is evaporated to 45% TS. How much water is removed?

  1. 2,000 kg/h
  2. 3,600 kg/h
  3. 8,000 kg/h
  4. 4,500 kg/h
Answer and working

C. 8,000 kg/h

Solids 900 kg/h; concentrate = 900/0.45 = 2,000 kg/h; water = 10,000 − 2,000 = 8,000 kg/h.

A study plan for Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants in ICAR AIEEA-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (42% of the 79 questions): Fluid properties and Bernoulli's equation (9, 11%); Pipe flow, Reynolds number and friction losses (9, 11%); Sanitary centrifugal and positive displacement pumps; pump selection (8, 10%); Conduction, convection and radiation (7, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Dimensionless numbers and dimensional analysis (7, 9%); Heat exchangers: LMTD and effectiveness-NTU (7, 9%); Laws of thermodynamics; steam tables (7, 9%); Mass and energy balances in dairy processes (7, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Diffusion and mass transfer coefficients (6, 8%); Fins and insulation (6, 8%); Flow of non-Newtonian dairy fluids (6, 8%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Conduction, convection and radiation (1 hard of 7), Laws of thermodynamics; steam tables (1 hard of 7), Pipe flow, Reynolds number and friction losses (1 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Mass and energy balances in dairy processes (2 easy of 7); Fluid properties and Bernoulli's equation (2 easy of 9).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG Fluid Flow, Thermodynamics & Heat Transfer in Dairy Plants

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.