ICAR AIEEA-PG Membrane Processing & Dairy Ingredients: practice questions
ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
21written to this exam in this subject
12syllabus units
About ICAR AIEEA-PG
ICAR AIEEA-PG: Dairy Science (group 16) and Dairy Technology (group 17) is a postgraduate admission exam run by NTA for ICAR, for candidates in India. Computer-based, 2 hours, 120 multiple-choice questions, +4 for a correct answer and −1 for a wrong one (2026 bulletin). One paper per major subject group.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Membrane Processing & Dairy Ingredients in ICAR AIEEA-PG
Application of membrane processing in milk processing: MF, UF, NF and RO uses, bactofugation versus MF, and basic definitions such as permeate, retentate and concentration factor.
MF, UF, NF and RO in milk and whey processing, the protein and lactose ingredients they make, and how their function is measured.
Our 21 ICAR AIEEA-PG questions in this subject: 13 easy, 8 medium, 0 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.
Question 1 · medium
Skim milk with 3.3% protein is ultrafiltered to a VCF of 4 with complete protein retention. What is the retentate protein content?
Cross-flow filtration differs from dead-end filtration in that:
Feed is frozen before it touches the membrane
Feed is pushed straight through the membrane with no recirculation
Feed passes through two membranes in series in the same direction
Feed flows along the membrane, sweeping retained material away
Answer and working
D. Feed flows along the membrane, sweeping retained material away
Tangential flow limits cake build-up.
Question 4 · easy
Concentration polarisation is:
Irreversible chemical damage to the membrane polymer by strong alkali during cleaning
The electrical charge that develops across an RO membrane
A reversible build-up of retained solutes at the membrane surface
Crystallisation of lactose inside the permeate collection tube
Answer and working
C. A reversible build-up of retained solutes at the membrane surface
It disappears when pressure is released or cross-flow increases.
Question 5 · medium
The bacteria-rich MF retentate from ESL milk processing is:
Used as starter culture
Bottled directly as milk
Mixed into cream without heat
Sterilised and returned, or discarded
Answer and working
D. Sterilised and returned, or discarded
It is a small stream handled to prevent contamination.
Question 6 · easy
Milk protein concentrate is made mainly by:
UF of skim milk
NF of whey
MF of cream
RO of buttermilk
Answer and working
A. UF of skim milk
UF retains casein and whey protein together.
Question 7 · easy
Nanofiltration partially demineralises whey because it:
Uses an electric field to move ions
Passes protein and lactose but retains water
Retains all salts and passes lactose
Passes monovalent salts with the water
Answer and working
D. Passes monovalent salts with the water
Monovalent ions permeate; lactose and divalent ions are retained.
Question 8 · easy
RO is used before evaporating whey mainly to:
Remove bacteria
Separate protein from lactose
Demineralise the whey
Remove water more cheaply
Answer and working
D. Remove water more cheaply
Membrane dewatering costs less than early evaporator stages.
Question 9 · easy
Which dairy protein is especially valued as an emulsifier in coffee whiteners?
Lactose
Alpha-lactalbumin crystals
Sodium caseinate
Milk minerals
Answer and working
C. Sodium caseinate
Flexible caseinate molecules adsorb rapidly at oil–water interfaces.
Question 10 · easy
Dairy protein content is calculated from total nitrogen multiplied by:
4.00
5.70
6.38
6.25
Answer and working
C. 6.38
6.38 is the dairy factor; 6.25 is the general factor; 5.70 is used for wheat.
A study plan for Membrane Processing & Dairy Ingredients in ICAR AIEEA-PG
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (52% of the 21 questions): Flux, transmembrane pressure and concentration factor (3, 14%); Membrane classification and membrane materials (3, 14%); Microfiltration: bacteria removal and micellar casein (3, 14%); Membrane modules and plant configurations (2, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Reverse osmosis for concentration and water recovery (2, 10%); Ultrafiltration: milk protein concentrates and cheese milk (2, 10%); Concentration polarisation and fouling models (1, 5%); Diafiltration (1, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Functional properties of dairy proteins: solubility, emulsifying, foaming, gelation (1, 5%); Ingredient specifications and applications (1, 5%); Membrane cleaning and sanitation (1, 5%); Nanofiltration and electrodialysis for demineralisation (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Bank the easy marks: Concentration polarisation and fouling models (1 easy of 1); Diafiltration (1 easy of 1).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.