Indian Forest Service Examination Forest Inventory & Sampling Design: practice questions
Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission
Original practice questions written to the published syllabus · not past papers
10worked here, free
18written to this exam in this subject
10syllabus units
About Indian Forest Service Examination
Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Forest Inventory & Sampling Design in Indian Forest Service Examination
Planning and running forest inventories: kinds of enumeration, sampling designs and plot types, sample size, estimation and error, from a timber cruise to a national forest inventory.
Our 18 Indian Forest Service Examination questions in this subject: 4 easy, 11 medium, 3 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.
Question 1 · medium
Which statement about complete enumeration is correct?
It has no error of any kind, so its totals are always exactly correct
It has a larger sampling error than any probability sample of plots
It can be used only in national inventories covering a whole country
It has no sampling error but still has measurement and recording errors
Answer and working
D. It has no sampling error but still has measurement and recording errors
Measuring every tree removes sampling error, but instruments and observers still make mistakes, and tired crews may make more. It is used for small valuable areas, not national inventories.
Question 2 · hard
A volume equation built for trees up to 60 cm diameter is applied to an inventory where many trees exceed 90 cm. Which kind of error does this most likely add?
Sampling error only, which more plots would remove
Edge-effect error from plots crossing the boundary
Finite-population error from a large sampling fraction
Prediction or model error, and possible bias
Answer and working
D. Prediction or model error, and possible bias
Extrapolating an equation beyond its data range causes prediction error and often systematic bias. More plots reduce sampling error but not this; edge effects and the finite population correction are unrelated.
Question 3 · easy
In Neyman (optimum) allocation, the number of plots in a stratum is proportional to:
Stratum area multiplied by stratum standard deviation
Stratum area alone
Stratum mean volume alone
Number of tree species in the stratum
Answer and working
A. Stratum area multiplied by stratum standard deviation
Neyman allocation gives more plots to large and variable strata: nh ∝ Ah × sh. Area alone is proportional allocation; mean volume and species count are not the basis.
Question 4 · medium
In double sampling for stratification, what does each phase estimate?
Photo points estimate stratum proportions; ground plots on a subsample estimate stratum means
Ground plots estimate stratum proportions; photo points estimate tree heights in each stratum
Both phases measure only forest area; volume comes from yield tables for each stratum
Photo points estimate mortality; ground plots estimate ingrowth since the last inventory
Answer and working
A. Photo points estimate stratum proportions; ground plots on a subsample estimate stratum means
The large photo sample classifies points into strata to estimate their proportions; the ground subsample gives stratum means. This was the classic design of many national inventories.
Question 5 · hard
Two independent strata totals have standard errors of 30,000 m³ and 40,000 m³. What is the standard error of the forest total?
70,000 m³
50,000 m³
35,000 m³
10,000 m³
Answer and working
B. 50,000 m³
Independent variances add: √(30,000² + 40,000²) = 50,000 m³. Adding the SEs (70,000) overstates; averaging (35,000) or subtracting (10,000) are wrong.
Question 6 · easy
Which countries began the first national forest inventories, in the 1920s?
India and Nepal
Brazil and Indonesia
Kenya and South Africa
Finland and Sweden
Answer and working
D. Finland and Sweden
Finland and Sweden began nationwide inventories with systematic line surveys in the 1920s. The other countries developed national inventories later.
Question 7 · easy
FAO compiles the Global Forest Resources Assessment from country reports at intervals of about:
One year
Five years
Twenty-five years
Fifty years
Answer and working
B. Five years
The FRA has been issued about every five years (for example 2010, 2015, 2020). Annual, quarter-century and half-century intervals are wrong.
Question 8 · medium
In phytosociological studies the importance value index (IVI) of a species is:
Density × frequency × dominance, summing to 100 over all species in the stand
Relative density alone, expressed per hectare and summing to the total stocking of the stand
Relative density + relative frequency + relative dominance, summing to 300 over all species
Basal area divided by tree height, averaged over all the quadrats in the study
Answer and working
C. Relative density + relative frequency + relative dominance, summing to 300 over all species
IVI adds three relative measures in per cent, so all species together total 300. Multiplication, density alone and basal area ÷ height are not the IVI.
Question 9 · easy
A species-accumulation curve is used in biodiversity inventory to judge:
Whether enough quadrats have been sampled to record most of the species present
The growth rate of each species over the period between two measurements
The commercial value of the timber species found on each sample plot
The age of the oldest tree recorded in each quadrat of the survey
Answer and working
A. Whether enough quadrats have been sampled to record most of the species present
When the curve levels off, additional quadrats add few new species. Growth, value and age are not shown by the curve.
Question 10 · medium
Which is a common mistake when computing the standard error of a stratified mean?
Weighting each stratum by its area when computing the stratified mean from the stratum means
Calculating a separate variance for each stratum from its own plots
Adding the stratum standard errors directly instead of combining weighted variances
Using the stratum areas from the map to calculate the weights
Answer and working
C. Adding the stratum standard errors directly instead of combining weighted variances
Variances (weighted by Wh²/nh) are added, then the square root taken; adding SEs overstates the error. The other steps are correct practice.
A study plan for Forest Inventory & Sampling Design in Indian Forest Service Examination
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (50% of the 18 questions): Inventory of non-timber resources and biodiversity (3, 17%); Cluster, multistage and multiphase sampling (2, 11%); Inventory data processing and reporting (2, 11%); National forest inventories and continuous forest inventory (2, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Objectives and kinds of enumeration: complete and partial (2, 11%); Sample size and sampling error (2, 11%); Stratified sampling (2, 11%); Point, line and strip cruising (1, 6%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Sample plots: fixed-area, variable-radius, permanent (1, 6%); Simple random and systematic sampling (1, 6%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Inventory data processing and reporting (1 hard of 2), Objectives and kinds of enumeration: complete and partial (1 hard of 2), Sample size and sampling error (1 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: National forest inventories and continuous forest inventory (2 easy of 2); Stratified sampling (1 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.