LAISHA
Open Laisha

ICAR AIEEA-PG / PGS Food Process Modelling, Simulation & Optimisation: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
16written to this exam in this subject
4syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Food Process Modelling, Simulation & Optimisation in ICAR AIEEA-PG / PGS

Building and using models of food processes: kinetic models of quality and microbial change, numerical solution of heat and mass transfer, computational fluid dynamics, multi-objective optimisation, data-driven and machine-learning models, and digital twins of food plants.

Our 16 ICAR AIEEA-PG / PGS questions in this subject: 6 easy, 10 medium, 0 hard, across 4 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · medium

A food slab of half-thickness 0.01 m (k = 0.5 W/m·K) is cooled with h = 20 W/m²·K. What is the Biot number, and is a lumped model adequate?

  1. 0.04; yes, lumped analysis is fine
  2. 0.4; no, internal gradients matter
  3. 40; yes, external resistance dominates
  4. 0.4; yes, because it is below 1
Answer and working

B. 0.4; no, internal gradients matter

Bi = hL/k = 20 × 0.01/0.5 = 0.4, above about 0.1, so internal temperature gradients cannot be ignored. 40 inverts k/h; 0.04 uses L = 0.001 m; a value below 1 is not the lumped criterion.

Question 2 · easy

Which type of model is derived from conservation laws and transport equations?

  1. Empirical (black-box)
  2. Mechanistic (white-box)
  3. Random-number model
  4. Purely statistical regression
Answer and working

B. Mechanistic (white-box)

Mechanistic models use physical, chemical and biological laws; empirical models fit observed data.

Question 3 · medium

What is the Fourier number for α = 1.4 × 10⁻⁷ m²/s, t = 1800 s and L = 0.02 m?

  1. 0.13
  2. 0.0126
  3. 0.63
  4. 6.3
Answer and working

C. 0.63

Fo = αt/L² = 1.4 × 10⁻⁷ × 1800/0.0004 = 0.63. 0.0126 forgets to square L; 6.3 and 0.13 slip factors.

Question 4 · medium

Using the Ratkowsky model √μ_max = b(T − T_min) with b = 0.03 and T_min = −2 °C, what is μ_max at 8 °C?

  1. 0.18 h⁻¹
  2. 0.09 h⁻¹
  3. 0.0009 h⁻¹
  4. 0.30 h⁻¹
Answer and working

B. 0.09 h⁻¹

√μ = 0.03 × (8 + 2) = 0.30, so μ = 0.30² = 0.09 h⁻¹. 0.30 forgets to square; 0.18 uses T − T_min = 6; 0.0009 squares b only.

Question 5 · easy

A Weibull survivor curve has shape parameter p = 0.6. What shape does it show?

  1. A curve that rises again
  2. A concave curve with tailing
  3. A convex curve with a shoulder
  4. A straight log-linear line
Answer and working

B. A concave curve with tailing

p < 1 gives tailing; p > 1 a shoulder; p = 1 log-linear.

Question 6 · medium

A spore has D₁₂₁ = 4.0 min and z = 10 °C. What is D at 125 °C?

  1. 1.59 min
  2. 0.40 min
  3. 1.60 min
  4. 10.0 min
Answer and working

A. 1.59 min

D = 4.0/10^((125 − 121)/10) = 4.0/2.51 = 1.59 min. 1.60 uses a linear 40% reduction; 0.40 applies a full z step; 10.0 multiplies.

Question 7 · easy

What is the role of a secondary model in predictive microbiology?

  1. Describing the growth curve at constant conditions
  2. Linking primary-model parameters to conditions
  3. Packaging the predictions into user software
  4. Measuring microbial counts in the laboratory
Answer and working

B. Linking primary-model parameters to conditions

Primary models describe curves; secondary models link parameters to temperature, pH, a_w; tertiary models are software.

Question 8 · medium

Where is the slowest-heating zone of a liquid heated by natural convection in a still can?

  1. Near the bottom of the container
  2. Exactly at the geometric centre
  3. At the can wall
  4. At the top under the lid
Answer and working

A. Near the bottom of the container

Hot liquid rises along the wall and cooler liquid collects lower down, at about 10–15% of height from the base.

Question 9 · medium

Why are cook values calculated with a z value of 20 to 40 °C or more rather than 10 °C?

  1. The cook value is expressed in degrees rather than minutes
  2. Quality attributes never change during heating
  3. Quality is less temperature-sensitive than spores
  4. Spores have z values of about 40 °C or more
Answer and working

C. Quality is less temperature-sensitive than spores

Quality degradation has lower activation energy, hence higher z.

Question 10 · medium

A Page model MR = exp(−ktⁿ) has k = 0.01 min⁻ⁿ and n = 1.2. What is MR after 60 min?

  1. 0.74
  2. 0.01
  3. 0.55
  4. 0.26
Answer and working

D. 0.26

60^1.2 = 136.1; MR = exp(−0.01 × 136.1) = 0.26. 0.55 uses n = 1 (exp(−0.6)); 0.74 uses t^0.5; 0.01 confuses MR with k.

A study plan for Food Process Modelling, Simulation & Optimisation in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (56% of the 16 questions): Modelling simultaneous heat and mass transfer in drying and frying (5, 31%); Kinetic modelling of quality, nutrient and microbial changes (4, 25%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Modelling heat transfer in thermal processing (4, 25%); Types of models: empirical, mechanistic and data-driven (3, 19%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Bank the easy marks: Kinetic modelling of quality, nutrient and microbial changes (2 easy of 4); Modelling simultaneous heat and mass transfer in drying and frying (2 easy of 5).

    Do these early in revision so they are fast on the day.

  4. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS Food Process Modelling, Simulation & Optimisation

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.