LAISHA
Open Laisha

ICAR AIEEA-PG / PGS In-plant Training, Experiential Learning & Project: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
64written to this exam in this subject
9syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

In-plant Training, Experiential Learning & Project in ICAR AIEEA-PG / PGS

The practical semester most food technology degrees require: work in a food plant or laboratory, an experiential-learning unit that makes and sells a product, and a project or capstone that takes one problem from question to report.

Our 64 ICAR AIEEA-PG / PGS questions in this subject: 24 easy, 39 medium, 1 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · easy

Which learning objective is written in SMART form?

  1. Learn about the dairy industry in general terms
  2. Understand everything about food safety during the placement
  3. By week four, map the milk line and its CCPs unaided
  4. Become a good food technologist by the end of the year
Answer and working

C. By week four, map the milk line and its CCPs unaided

A SMART objective is specific, measurable, achievable, relevant and time-bound; the other options are vague and unmeasurable.

Question 2 · medium

What does document control in a quality system ensure?

  1. Documents are never changed once they have been written
  2. Only current versions are in use
  3. All documents are kept secret from the production staff
  4. Only senior managers may read the written procedures
Answer and working

B. Only current versions are in use

Document control approves, issues and withdraws documents so that obsolete versions are not used.

Question 3 · medium

In a mass balance for a steady continuous process, what is assumed about accumulation?

  1. It always equals the input
  2. It is equal to the water evaporated
  3. It equals the product flow
  4. It is zero, so input equals output
Answer and working

D. It is zero, so input equals output

At steady state nothing builds up inside the system, so inflows equal outflows.

Question 4 · medium

Why are blanks and control samples run with each batch of analyses?

  1. To increase the number of results reported each day
  2. To use up surplus reagents before they expire
  3. To replace the need for calibration of instruments
  4. To detect contamination and confirm the method
Answer and working

D. To detect contamination and confirm the method

Blanks reveal reagent or glassware contributions; controls show whether the analytical system performs as expected. Instruments still need calibration.

Question 5 · medium

Why does the experiential unit assign roles such as production, quality, marketing and finance?

  1. To let each student avoid any production work
  2. Because the law requires four managers in every unit
  3. To experience running a whole small enterprise
  4. To make record keeping unnecessary for the group
Answer and working

C. To experience running a whole small enterprise

Role-based teams mirror a small company and teach how functions depend on each other.

Question 6 · medium

Which control point is critical when hot-filling jam into jars?

  1. The number of jars per carton
  2. The brand name on the lid
  3. The colour of the fruit
  4. Filling temperature and container treatment
Answer and working

D. Filling temperature and container treatment

Hot filling at a sufficient temperature with sterilised or hot containers and inversion controls post-process contamination; the others are not safety controls.

Question 7 · medium

For the same data (mean 3.30%, SD 0.16%), what is the CV?

  1. 0.16%
  2. 3.3%
  3. 48%
  4. 4.8%
Answer and working

D. 4.8%

CV = 0.158/3.30 × 100 = 4.8%. The other values confuse SD, mean or decimal places.

Question 8 · medium

What must the materials and methods section allow?

  1. The student to avoid citing methods
  2. Another person to repeat the work
  3. The reader to skip the results
  4. The results to be omitted
Answer and working

B. Another person to repeat the work

Methods give equipment, materials, conditions, replicates and statistics in enough detail to reproduce the study.

Question 9 · easy

A trainee has had diarrhoea the night before a production shift. What should they do?

  1. Tell nobody to avoid losing a day
  2. Wear two pairs of gloves and continue
  3. Report it before entering production areas
  4. Work as usual and wash hands more often
Answer and working

C. Report it before entering production areas

Illness must be reported so the trainee can be excluded or restricted, protecting the product.

Question 10 · easy

May a trainee post photographs of the production line on social media?

  1. Yes, freely, at any time during the placement
  2. Only with the host's permission
  3. Yes, provided that all faces are blurred out
  4. Yes, but only after the placement has ended
Answer and working

B. Only with the host's permission

Photographs can reveal confidential processes; permission is required.

A study plan for In-plant Training, Experiential Learning & Project in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (41% of the 64 questions): Daily production and quality-control duties (9, 14%); Plant orientation: process flow, utilities and quality systems (9, 14%); Choosing a placement and setting learning objectives (8, 13%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Laboratory practice in an industry or regulatory laboratory (8, 13%); Professional conduct, safety and confidentiality (8, 13%); Experiential learning: running a small production unit (7, 11%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Report writing and presentation (7, 11%); Data collection and analysis (4, 6%); Project planning and literature review (4, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Plant orientation: process flow, utilities and quality systems (1 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Choosing a placement and setting learning objectives (4 easy of 8); Data collection and analysis (2 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS In-plant Training, Experiential Learning & Project

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.