ICAR AIEEA-PG / PGS Physical Properties, Rheology & Texture of Foods: practice questions
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
67written to this exam in this subject
12syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Physical Properties, Rheology & Texture of Foods in ICAR AIEEA-PG / PGS
Unit I names physical properties of foods and properties of colloidal systems, gels and emulsions; Unit II names engineering properties of food materials. MCQs test definitions (true, apparent and bulk density, porosity, thermal diffusivity), flow behaviour classes and models, thixotropy, viscometer types, TPA parameters, CIELAB axes, dielectric properties and glass transition.
Measuring and modelling how foods flow, deform, break and transfer heat: rheometry of fluids and gels, viscoelasticity, texture profile analysis, and thermal, electrical and optical properties. Agricultural Engineering's engineering-properties-biomaterials covers size, shape, density and friction of grains and produce; this subject goes deeper into processed foods and their measurement.
Our 67 ICAR AIEEA-PG / PGS questions in this subject: 16 easy, 43 medium, 8 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · hard
A food has k = 0.50 W/m K, ρ = 1,050 kg/m³ and cp = 3,600 J/kg K. Its thermal diffusivity is closest to
0.146 m²/s
1.32 × 10⁻⁴ m²/s
7.56 × 10⁶ m²/s
1.32 × 10⁻⁷ m²/s
Answer and working
D. 1.32 × 10⁻⁷ m²/s
α = k/(ρcp) = 0.50/(1,050 × 3,600) = 1.32 × 10⁻⁷ m²/s. Using cp in kJ gives a value 1,000 times too large; the other two rearrange the formula wrongly.
Question 2 · medium
Milk has dynamic viscosity 2.0 mPa s and density 1,030 kg/m³. Its kinematic viscosity is closest to
A purée follows τ = Kγ̇ⁿ with K = 10 Pa sⁿ and n = 0.4. Its apparent viscosity at 50 s⁻¹ is closest to
47.8 Pa s
0.96 Pa s
2.09 Pa s
0.24 Pa s
Answer and working
B. 0.96 Pa s
η = Kγ̇^(n−1) = 10 × 50^(−0.6) = 0.96 Pa s. 47.8 Pa s is the shear stress; 2.09 uses exponent −n; 0.24 is the value at 500 s⁻¹.
Question 4 · medium
Thixotropy differs from shear-thinning in that thixotropy
depends only on the shear rate
occurs only in Newtonian fluids at high temperature
is measured only in solids
depends on the duration of shearing
Answer and working
D. depends on the duration of shearing
Shear-thinning is an immediate response to shear rate; thixotropy is time-dependent at a given rate.
Question 5 · medium
Single-point readings from a spindle ('Brookfield-type') viscometer on a non-Newtonian sauce are
true viscosities valid at any shear rate for any sample
comparable only under identical test conditions
independent of temperature
identical to cone-and-plate flow curves
Answer and working
B. comparable only under identical test conditions
The shear rate is undefined for non-Newtonian samples, so readings are empirical apparent viscosities.
Question 6 · medium
A gel has G′ = 1,200 Pa and G″ = 150 Pa. Its loss tangent is
8.000
0.889
1,350
0.125
Answer and working
D. 0.125
tan δ = G″/G′ = 150/1,200 = 0.125, mainly elastic. 8.000 inverts the ratio; 1,350 adds the moduli.
Question 7 · easy
The Maxwell model consists of
a spring and dashpot in parallel
two springs in parallel
a single dashpot
a spring and dashpot in series
Answer and working
D. a spring and dashpot in series
Series spring–dashpot (Maxwell) represents a viscoelastic liquid; parallel (Kelvin–Voigt) a viscoelastic solid.
Question 8 · medium
The extensograph measures
the pasting viscosity of starch
resistance and extensibility of rested dough
the colour of the dough
the gas production of yeast
Answer and working
B. resistance and extensibility of rested dough
Dough is stretched to rupture after resting; the curve gives resistance, extensibility and energy.
Question 9 · medium
A tomato paste has a* = 30 and b* = 24. Its chroma C* is closest to
54.0
6.0
1.25
38.4
Answer and working
D. 38.4
C* = √(30² + 24²) = 38.4. 54.0 adds; 6.0 subtracts; 1.25 is the a*/b* ratio.
Question 10 · medium
The dielectric loss factor ε″ of a food describes its ability to
store electrical energy without heating
reflect microwaves like a metal
conduct heat by conduction
convert electromagnetic energy into heat
Answer and working
D. convert electromagnetic energy into heat
ε″ governs absorption and heating; ε′ governs storage.
A study plan for Physical Properties, Rheology & Texture of Foods in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (45% of the 67 questions): Texture: texture profile analysis and empirical texture tests (9, 13%); Physical properties of foods: density, porosity and particle size distribution (8, 12%); Fundamentals of rheology: stress, strain and viscosity (7, 10%); Colour measurement: CIE L*a*b* and colour difference (6, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Rheology of doughs and dairy gels (6, 9%); Newtonian and non-Newtonian fluids: power-law, Herschel-Bulkley and Casson models (5, 7%); Rotational and capillary viscometry (5, 7%); Thermal properties: specific heat, thermal conductivity and diffusivity of foods (5, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Viscoelasticity: creep, stress relaxation and oscillatory rheology (5, 7%); Electrical and dielectric properties of foods (4, 6%); Time-dependent flow: thixotropy and rheopexy (4, 6%); Glass transition and state diagrams (3, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Rheology of doughs and dairy gels (2 hard of 6), Physical properties of foods: density, porosity and particle size distribution (2 hard of 8), Rotational and capillary viscometry (1 hard of 5).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Colour measurement: CIE L*a*b* and colour difference (2 easy of 6); Glass transition and state diagrams (1 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.