LAISHA
Open Laisha

ICAR AIEEA-PG / PGS Fruit & Vegetable Processing Technology: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
107written to this exam in this subject
14syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Fruit & Vegetable Processing Technology in ICAR AIEEA-PG / PGS

Unit III names the technology of fruits and vegetables and by-products. Questions are MCQs on definitions and classic specifications (RTS, nectar, squash, cordial, jam end point), pectin tests, jelly defects (syneresis, crystallisation), peeling methods, lacquers for cans, sulphuring, candying, pickle microbiology and defects, and tomato product terms (Bostwick, Howard mould count).

Processed products from fruits and vegetables: juices and concentrates, jams, jellies and marmalades, pickles, sauces and ketchup, dried and frozen products, canned products and minimally processed produce, with pectin chemistry and by-product recovery. Packhouse and storage engineering are in Agricultural Engineering's post-harvest-horticultural-crops.

Our 107 ICAR AIEEA-PG / PGS questions in this subject: 30 easy, 62 medium, 15 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · easy

Lye peeling of peaches removes the skin by

  1. Hot alkali dissolving the pectin under the skin
  2. Abrasive rollers rubbing the skin away mechanically
  3. Sudden release of steam pressure lifting the skin
  4. Burning the outer skin off in a gas flame
Answer and working

A. Hot alkali dissolving the pectin under the skin

Hot sodium hydroxide attacks the pectic material under the skin so the skin washes off; the fruit is then rinsed and often dipped in weak acid. Abrasion, steam-flash and flame peeling are separate methods used for other crops.

Question 2 · hard

100 kg of RTS beverage must contain 10% juice, 10% TSS and 0.3% acidity as citric acid. The juice used has 10 °Brix and 1.0% acidity. Ignoring the soluble solids contributed by added acid, how much sugar must be added?

  1. 10.0 kg
  2. 8.0 kg
  3. 9.0 kg
  4. 1.0 kg
Answer and working

C. 9.0 kg

The 10 kg of juice brings 10 × 0.10 = 1.0 kg of soluble solids. The beverage needs 100 × 0.10 = 10 kg, so sugar = 10 − 1 = 9.0 kg. 10 kg ignores the juice's own solids; 1.0 kg is the solids from juice; 8.0 kg double-counts them.

Question 3 · medium

Sucrose crystals form in a stored jam. The most likely processing fault is

  1. Too much pectin
  2. Too little inversion
  3. Too long a boiling time
  4. Too much acid added
Answer and working

B. Too little inversion

Insufficient inversion, for example from low acid or very short boiling, leaves too much sucrose, which crystallises. Long boiling and high acid increase inversion, and excess pectin affects firmness, not crystallisation.

Question 4 · hard

Why is vacuum boiling sometimes used for high-quality jams?

  1. It increases sucrose inversion and so prevents crystallisation
  2. It removes the need for pectin by concentrating the fruit fibre
  3. It sterilises the jam so that hot filling becomes unnecessary
  4. Lower boiling temperature saves colour and flavour
Answer and working

D. Lower boiling temperature saves colour and flavour

Under vacuum the jam boils at a lower temperature, so browning, pectin degradation and loss of fresh flavour are reduced. Lower temperature actually reduces inversion, pectin is still needed, and the product still needs hot filling or pasteurisation.

Question 5 · medium

Canned sweet corn shows black staining on the inside of the can. The lacquer that prevents this contains

  1. Calcium chloride
  2. Citric acid
  3. Sodium benzoate
  4. Zinc oxide
Answer and working

D. Zinc oxide

Sulphur released from proteins forms black iron or tin sulphide; sulphur-resistant C-enamel contains zinc oxide, which forms white zinc sulphide instead. The other substances are not lacquer components.

Question 6 · medium

Canned pears with a pH close to 4.6 are processed in boiling water after citric acid is added to the syrup. This practice is called

  1. Acidification
  2. Exhausting
  3. Syneresis
  4. Inversion
Answer and working

A. Acidification

Adding acid to bring a borderline fruit clearly below pH 4.6 is acidification; it makes a boiling-water process adequate. Exhausting removes air, syneresis is gel weeping, and inversion is hydrolysis of sucrose.

Question 7 · medium

Grapes for raisins are dipped in an alkaline emulsion of oils before drying to

  1. Bleach the skin to a golden colour
  2. Crack the waxy bloom and speed drying
  3. Add oil that prevents raisins sticking
  4. Inactivate polyphenol oxidase completely
Answer and working

B. Crack the waxy bloom and speed drying

The dip disrupts the waxy cuticle so water escapes faster. Golden colour comes from sulphuring, the dip is not a coating for stickiness, and it does not reliably inactivate enzymes.

Question 8 · easy

Potatoes for chips (crisps) should have

  1. High dry matter and low reducing sugars
  2. Low dry matter and high reducing sugars
  3. High reducing sugars for golden colour
  4. High water content for crispness
Answer and working

A. High dry matter and low reducing sugars

High dry matter gives yield and crisp texture with less oil uptake; low reducing sugars limit Maillard darkening and acrylamide. High sugars give dark, bitter chips, and high water gives soggy, oily chips.

Question 9 · medium

Potatoes stored at 4 °C give dark chips. The reason is

  1. Cold storage destroys the tuber's starch granules
  2. Cold-induced sweetening raises reducing sugars
  3. Low temperature raises the tuber's asparagine to toxic levels
  4. Cold storage lowers dry matter by water uptake
Answer and working

B. Cold-induced sweetening raises reducing sugars

Below about 8–10 °C, starch breakdown to sugars outpaces their use, so glucose and fructose accumulate and brown during frying. Starch granules remain, asparagine levels are not the main change, and dry matter is not lowered by water uptake.

Question 10 · medium

Mango processing waste is valued because mango kernels yield

  1. A protease used to tenderise meat
  2. An essential oil rich in d-limonene
  3. A fat used in confectionery fat blends
  4. A pectin that sets without any sugar
Answer and working

C. A fat used in confectionery fat blends

Mango kernel fat has a fatty acid profile suited to confectionery fat blends. Proteases come from pineapple or papaya, d-limonene from citrus peel, and pectin from mango peel still needs sugar and acid if it is HM pectin.

A study plan for Fruit & Vegetable Processing Technology in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (39% of the 107 questions): By-product utilisation: pectin, peel and pomace (9, 8%); Squashes, cordials, nectars and ready-to-serve beverages (9, 8%); Canning of fruits and vegetables (8, 7%); Dehydrated and frozen fruits and vegetables (8, 7%); Fruit juices: extraction, clarification, concentration and packaging (8, 7%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Jams, jellies, marmalades and fruit preserves (8, 7%); Pectin chemistry and gel formation (8, 7%); Preparation for processing: washing, peeling, cutting and blanching (8, 7%); Tomato products: juice, puree, paste and ketchup (8, 7%); Composition and processing quality of fruits and vegetables (7, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Pickles, chutneys and sauces (7, 7%); Potato products (7, 7%); Candied fruits (6, 6%); Minimally processed fresh-cut produce (6, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Squashes, cordials, nectars and ready-to-serve beverages (3 hard of 9), Dehydrated and frozen fruits and vegetables (2 hard of 8), Jams, jellies, marmalades and fruit preserves (2 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Composition and processing quality of fruits and vegetables (3 easy of 7); Pectin chemistry and gel formation (3 easy of 8).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS Fruit & Vegetable Processing Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.