ICAR AIEEA-PG / PGS Principles of Food Science & Food Preservation: practice questions
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
80written to this exam in this subject
13syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Principles of Food Science & Food Preservation in ICAR AIEEA-PG / PGS
The first map of the whole field: what food is, why it deteriorates, and the families of preservation (heat, cold, drying, chemicals, fermentation, irradiation, packaging and hurdles). Each family is studied in depth later; this subject teaches the logic that connects them.
Our 80 ICAR AIEEA-PG / PGS questions in this subject: 0 easy, 72 medium, 8 hard, across 13 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · medium
Where are post-harvest food losses usually largest?
Frozen foods held continuously at −18 °C in modern cold stores and freezers
Canned foods in regions with advanced retail systems
Dry grains in regions with modern silos and cold chains
Perishables in regions with little storage, cooling and processing
Answer and working
D. Perishables in regions with little storage, cooling and processing
Losses concentrate in perishable foods (fruits, vegetables, fish, milk) where cold chains and processing are scarce. Canned and frozen foods in good storage are among the least wasted.
Question 2 · hard
A food has 12% moisture, 10% protein, 2% fat and 1.5% ash. What is its carbohydrate content by difference?
Why are food composition table values only approximate for a given batch?
All foods sold under one name have identical composition worldwide by international law
Tables report only the water content and never the protein
Composition varies with variety, breed, season, maturity and processing
Composition changes only when food is irradiated or frozen
Answer and working
C. Composition varies with variety, breed, season, maturity and processing
Tables give typical values; individual lots differ, which is why processors test their own raw materials.
Question 4 · medium
A product keeps 6 months at 30 °C. If Q10 = 2, about how long will it keep at 20 °C?
6 months
12 months
3 months
60 months
Answer and working
B. 12 months
Lowering by 10 °C halves the rate when Q10 = 2, doubling shelf life: 6 × 2 = 12 months. 3 months applies the factor the wrong way.
Question 5 · medium
Which organism can grow at the lowest water activity?
Staphylococcus aureus
Most Gram-negative bacteria
Clostridium botulinum type A
Xerophilic moulds
Answer and working
D. Xerophilic moulds
Xerophilic moulds grow down to about 0.61; S. aureus about 0.86; C. botulinum type A about 0.94; Gram-negatives about 0.93–0.97.
Question 6 · medium
Taking D121.1 of Clostridium botulinum spores as 0.21 min, what is a 12D process at 121.1 °C?
2.52 min
12.0 min
0.21 min
25.2 min
Answer and working
A. 2.52 min
12 × 0.21 = 2.52 min. 25.2 min is the value at 111.1 °C (D tenfold higher); 12.0 forgets D.
Question 7 · medium
Which produce is most likely to suffer chilling injury if stored at 4 °C?
Bananas
Cabbage
Carrots
Apples
Answer and working
A. Bananas
Many tropical fruits, including bananas and mangoes, suffer chilling injury below about 10–13 °C; apples, carrots and cabbage store well near 0 °C.
Question 8 · medium
Which preservative is most used against moulds and rope in bread?
Potassium nitrite
Calcium propionate
Ascorbic acid
Sodium chloride
Answer and working
B. Calcium propionate
Propionates inhibit moulds and rope-forming Bacillus; nitrite is a meat-curing agent; ascorbic acid is an antioxidant and dough improver.
Question 9 · medium
Why do potatoes for crisps and chips need low reducing sugars?
Reducing sugars raise the specific gravity and the crisp yield
Reducing sugars make the crisps absorb less oil and taste bland
Reducing sugars prevent the crisps from browning at all
Reducing sugars cause dark fry colour and acrylamide formation
Answer and working
D. Reducing sugars cause dark fry colour and acrylamide formation
Reducing sugars react with asparagine in the Maillard reaction during frying, darkening the product and forming acrylamide.
Question 10 · medium
Which raw-material property is most important for tomatoes used to make paste?
Thin, fragile skin
Very large fruit size
Low pectin content
High soluble solids
Answer and working
D. High soluble solids
Paste yield depends on soluble solids, so processing tomatoes are bred and paid for high Brix.
A study plan for Principles of Food Science & Food Preservation in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (46% of the 80 questions): Preservation by chemicals, sugar, salt and smoke (9, 11%); Preservation by removal of water: drying, concentration and intermediate-moisture foods (8, 10%); Preservation by heat: blanching, pasteurisation and sterilisation (7, 9%); Water activity and its relation to spoilage (7, 9%); Causes of food deterioration: microbial, enzymatic, chemical, physical and pest (6, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Food fortification and enrichment (6, 8%); Food groups, composition and food attributes: colour, texture, flavour and nutrition (6, 8%); Preservation by fermentation (6, 8%); Preservation by irradiation (6, 8%); Preservation by low temperature: chilling and freezing (6, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Raw-material quality factors for processing (6, 8%); Hurdle technology (4, 5%); History, scope and structure of the food industry worldwide (3, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Causes of food deterioration: microbial, enzymatic, chemical, physical and pest (1 hard of 6), Food fortification and enrichment (1 hard of 6), Food groups, composition and food attributes: colour, texture, flavour and nutrition (1 hard of 6).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.