ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
81written to this exam in this subject
14syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Unit I names general chemistry of food constituents, physical properties, colloidal systems, gels and emulsions, physicochemical changes during processing and storage, and metabolism of the macronutrients. MCQs test definitions and classification: Osborne fractions, reducing and non-reducing sugars, HM and LM pectin, aw limits for microbes, antioxidant classes and the meaning of PV, IV, SV and AV.
The four constituents that make up most of any food and how they behave during processing and storage: water and its mobility, sugars and starch, proteins and their functional properties, and lipids and their oxidation.
Our 81 ICAR AIEEA-PG / PGS questions in this subject: 28 easy, 48 medium, 5 hard, across 14 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · easy
Amylopectin differs from amylose in that it
is a linear α-1,4 chain that forms a deep blue complex with iodine
is a β-1,4 polymer of glucose that humans cannot digest
is highly branched through α-1,6 links and gives a red-purple colour with iodine
is made of fructose units joined by β-2,1 linkages, like the inulin of chicory roots
Answer and working
C. is highly branched through α-1,6 links and gives a red-purple colour with iodine
Amylopectin has α-1,6 branch points and stains red-purple; amylose is linear and stains blue. β-1,4 glucose is cellulose; fructose β-2,1 is inulin.
Question 2 · easy
Waxy maize starch contains
about 70 % amylose and 30 % amylopectin
about 25 % amylose like normal maize starch
almost no amylose, being nearly all amylopectin
only amylose with no amylopectin
Answer and working
C. almost no amylose, being nearly all amylopectin
Waxy starches are mutants with almost no amylose. Normal maize is about 25 % amylose; high-amylose types reach 50–70 %.
Question 3 · easy
Which of these amino acids is essential for adult humans?
Lysine
Alanine
Glutamic acid
Serine
Answer and working
A. Lysine
Lysine is one of the nine essential amino acids (His, Ile, Leu, Lys, Met, Phe, Thr, Trp, Val). Alanine, glutamic acid and serine can be synthesised.
Question 4 · medium
Tough cuts of meat become tender after long, moist cooking mainly because
myosin is converted into myoglobin, which is much softer when cooked
collagen in connective tissue is converted to soluble gelatin
actin is hydrolysed to free amino acids by heat alone
elastin melts at about 60 °C and dissolves in the juices
Answer and working
B. collagen in connective tissue is converted to soluble gelatin
Moist heat over time solubilises collagen to gelatin. Myosin does not turn into myoglobin; heat alone does not hydrolyse actin to amino acids; elastin is heat-stable.
Question 5 · easy
Linoleic acid is written in shorthand as
18:1 n-9
18:2 n-6
18:3 n-3
20:5 n-3
Answer and working
B. 18:2 n-6
Linoleic acid has 18 carbons, two double bonds, the first at the sixth carbon from the methyl end. 18:1 n-9 is oleic, 18:3 n-3 α-linolenic, 20:5 n-3 EPA.
Question 6 · medium
Margarines and shortenings are formulated to crystallise in the β′ form because it
gives large crystals and a sandy texture that consumers prefer
gives small crystals and a smooth, creamy texture with good aeration
is the least stable form and melts quickly in the refrigerator
is the only crystal form that can contain any unsaturated fatty acids
Answer and working
B. gives small crystals and a smooth, creamy texture with good aeration
β′ crystals are small and needle-like, giving smoothness and good creaming; β gives grainy textures. α is the least stable form.
Question 7 · medium
Linoleic acid oxidises much faster than oleic acid mainly because it has
a shorter carbon chain that evaporates more easily
a bis-allylic methylene group whose hydrogens are easily abstracted
no double bonds at all, which makes its alkyl radicals unusually stable
a trans double bond that reacts directly with oxygen
Answer and working
B. a bis-allylic methylene group whose hydrogens are easily abstracted
The CH₂ between two double bonds has weakly bound hydrogens, greatly speeding initiation. Both acids have 18 carbons; linoleic acid has two cis double bonds.
Question 8 · medium
Carotenoids protect foods against photo-oxidation mainly by
chelating iron and copper ions
donating hydrogen to peroxyl radicals
removing water from the food
quenching singlet oxygen
Answer and working
D. quenching singlet oxygen
Carotenoids deactivate singlet oxygen by energy transfer. Chelation is the role of citric acid and EDTA; hydrogen donation is that of phenolic antioxidants.
Question 9 · medium
The TBARS test, often used for meat products, measures mainly
malonaldehyde and related secondary oxidation products
free fatty acids released by lipase
hydroperoxides formed in early oxidation
total unsaturation of the fat
Answer and working
A. malonaldehyde and related secondary oxidation products
Thiobarbituric acid reacts with malonaldehyde and similar aldehydes. Free fatty acids are measured by acid value, hydroperoxides by peroxide value, unsaturation by iodine value.
Question 10 · easy
The free fatty acid content of an oil, expressed as % oleic acid, is approximately equal to
acid value divided by 1.99
acid value multiplied by 1.99
saponification value divided by 3
iodine value divided by 1.99
Answer and working
A. acid value divided by 1.99
FFA (% oleic) ≈ AV/1.99, from 56.1 (KOH) and 282 (oleic acid): 282/(56.1 × 10) ≈ 0.503 = 1/1.99. Saponification and iodine values measure other things.
A study plan for Food Chemistry I: Water, Carbohydrates, Proteins & Lipids in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (47% of the 81 questions): Food proteins: classification and sources (9, 11%); Monosaccharides, disaccharides and oligosaccharides (8, 10%); Cellulose, pectic substances, gums and dietary fibre (7, 9%); Lipids: classification, structure and nomenclature (7, 9%); Post-mortem changes and tenderisation of muscle proteins (7, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Water in foods: structure, bound and free water, sorption isotherms and water activity (7, 9%); Amino acids, peptides and protein structure (6, 7%); Hydrolytic rancidity and thermal polymerisation of frying oils (6, 7%); Lipid oxidation: autoxidation, photo-oxidation, rancidity and antioxidants (6, 7%); Starch: structure, gelatinisation, pasting and retrogradation (5, 6%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Chemical and physical changes in macronutrients during processing (4, 5%); Physical properties of fats: crystallisation and polymorphism (4, 5%); Protein denaturation and functional properties: solubility, gelation, emulsification and foaming (4, 5%); Glass transition and molecular mobility (1, 1%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Hydrolytic rancidity and thermal polymerisation of frying oils (2 hard of 6), Lipids: classification, structure and nomenclature (1 hard of 7), Post-mortem changes and tenderisation of muscle proteins (1 hard of 7).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Glass transition and molecular mobility (1 easy of 1); Starch: structure, gelatinisation, pasting and retrogradation (3 easy of 5).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.