ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papersICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
35.b Unit 5 names water activity and shelf life, autoxidation of milk fat and thermal oxidation, emulsions, foams and gels, functional properties of starch, proteins and lipids, and hydrocolloid–protein interactions; 35.a Units 2–3 name modified starches and proteins, vanaspati, meat tenderisation and enzymes. Expect deeper mechanism questions: glass transition and WLF, sorption hysteresis, singlet-oxygen versus radical oxidation, polymorphic transitions, calpain–calpastatin.
The four constituents that make up most of any food and how they behave during processing and storage: water and its mobility, sugars and starch, proteins and their functional properties, and lipids and their oxidation.
Our 69 ICAR AICE-JRF/SRF questions in this subject: 3 easy, 37 medium, 29 hard, across 14 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
On the food stability map, lipid oxidation in a dried food is slowest at
C. about the monolayer water activity, roughly aw 0.2–0.3
Lipid oxidation has a minimum near the monolayer; drier foods oxidise faster because water no longer shields metals and hydroperoxides, and intermediate aw raises mobility and catalyst activity. Browning, not oxidation, peaks near 0.6–0.8.
Using the Gordon–Taylor equation with Tg(sucrose) = 62 °C, Tg(water) = −135 °C and k = 4.7, the Tg of amorphous sucrose containing 5 % water is closest to
B. 23 °C
Tg = (0.95 × 62 + 4.7 × 0.05 × (−135))/(0.95 + 4.7 × 0.05) = (58.9 − 31.725)/1.185 = 22.9 °C. 52 °C ignores k (a simple mass-fraction average); 60 °C applies k to the sugar instead of the water; 27 °C stops at the numerator without dividing by 1.185.
Tg′ in frozen foods refers to the glass transition of
D. the maximally freeze-concentrated unfrozen phase
As ice forms, the remaining solution concentrates until it vitrifies at Tg′; storage below Tg′ greatly slows deterioration. Ice is crystalline and has no glass transition in this sense.
A frozen sauce shows weeping and a spongy texture after freeze–thaw cycles. Which starch would best correct this?
B. A hydroxypropylated or acetylated starch
Substituted starches resist retrogradation and are freeze–thaw stable. Acid-thinned starches form strong, retrograding gels; native potato and normal maize starches retrograde and weep.
Under the Codex definition, dietary fibre comprises carbohydrate polymers that are not hydrolysed by human endogenous enzymes and have
A. ten or more monomeric units, with inclusion of 3–9 units left to national authorities
Codex (2009) defines fibre as polymers of ten or more units, letting national authorities decide on 3–9 units. Solubility is not part of the definition.
Melamine was added to some protein ingredients as an adulterant because
A. Kjeldahl and Dumas methods measure total nitrogen, so nitrogen-rich melamine inflates apparent protein
Nitrogen-based methods cannot tell protein nitrogen from other nitrogen; melamine is about two-thirds nitrogen by mass. It is not an amino acid and does not form peptide bonds.
Papain, bromelain and ficin, used as meat tenderisers, are obtained respectively from
A. papaya, pineapple and fig
Papain comes from papaya, bromelain from pineapple and ficin from fig.
A dull, greyish film on the surface of chocolate stored with temperature fluctuations, which melts when touched, is
D. fat bloom from polymorphic change or fat migration
Fat bloom is recrystallised fat at the surface (form VI or migrated fat) and melts on touch; sugar bloom is a dry, gritty sugar layer that does not melt.
An oil has a peroxide value of 4 meq/kg and a p-anisidine value of 6. Its totox value is
C. 14
Totox = 2PV + AV = 2 × 4 + 6 = 14. 10 is a simple sum; 16 doubles the anisidine value instead; 24 multiplies the two.
During prolonged deep-fat frying, the increase in viscosity and foaming of the oil is mainly due to
A. formation of dimers and polymers of triacylglycerols
Thermal and oxidative polymerisation creates high-molecular-weight compounds that raise viscosity and stabilise foam. The other processes do not occur or would not raise viscosity.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.