LAISHA
Open Laisha

ICAR AICE-JRF/SRF Food Quality Assurance, Statistical Process Control & Laboratory Accreditation: practice questions

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
80written to this exam in this subject
14syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Food Quality Assurance, Statistical Process Control & Laboratory Accreditation in ICAR AICE-JRF/SRF

Controlling quality in the plant and in the laboratory: quality systems and TQM, control charts and process capability, acceptance sampling and two- and three-class sampling plans, laboratory quality management and ISO/IEC 17025 accreditation, method validation and proficiency testing.

Our 80 ICAR AICE-JRF/SRF questions in this subject: 18 easy, 48 medium, 14 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

In ISO 9001:2015, what replaced the separate requirement for preventive action?

  1. Risk-based thinking
  2. Annual third-party testing of finished products
  3. Statistical process control on all production lines
  4. A mandatory quality manual for every site
Answer and working

A. Risk-based thinking

The 2015 edition embeds risk-based thinking (clause 6.1, actions to address risks and opportunities) and removed the preventive-action clause. The quality manual became optional; testing and SPC are not mandated.

Question 2 · easy

Which is one of the seven quality management principles in ISO 9000:2015?

  1. Evidence-based decision making
  2. Centralised control by inspectors
  3. Lowest-price purchasing
  4. Mass inspection of all output
Answer and working

A. Evidence-based decision making

The principles are customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making and relationship management. Mass inspection and lowest-price purchasing are practices Deming warned against.

Question 3 · medium

Which pattern is a signal of a special cause under the Western Electric rules?

  1. Points scattered randomly between the limits
  2. Eight consecutive points on one side of the centre line
  3. Alternating points just above and below the centre line
  4. One point close to the centre line
Answer and working

B. Eight consecutive points on one side of the centre line

A long run on one side suggests a shift in the process mean. Random scatter is expected; a point near the centre line is normal; brief alternation within limits is not a standard rule signal.

Question 4 · hard

A laboratory plots one fat result per day on an individuals chart: mean 4.0%, mean moving range 0.15%. What are the control limits? (E₂ = 2.66)

  1. 3.55% to 4.45%
  2. 3.60% to 4.40%
  3. 3.70% to 4.30%
  4. 3.85% to 4.15%
Answer and working

B. 3.60% to 4.40%

Limits = X̄ ± 2.66 MR̄ = 4.0 ± 2.66 × 0.15 = 4.0 ± 0.40, i.e. 3.60% to 4.40%. 3.55 to 4.45 uses 3 × MR̄; 3.85 to 4.15 uses ±MR̄; 3.70 to 4.30 uses ±2MR̄.

Question 5 · hard

A filler must keep the mean at least 3σ above a 500 g minimum. If σ falls from 2.0 g to 1.0 g, by how much can the target be lowered?

  1. 6 g
  2. 3 g
  3. 1 g
  4. 2 g
Answer and working

B. 3 g

Target = 500 + 3σ: 506 g at σ = 2.0, 503 g at σ = 1.0, a saving of 3 g per pack. 1 g is the change in σ; 6 g is the old safety margin; 2 g is the old σ.

Question 6 · medium

A plan inspects 20 units and accepts the lot only if none is defective. What is the probability of accepting a lot that is 5% defective?

  1. 0.95
  2. 0.64
  3. 0.36
  4. 0.05
Answer and working

C. 0.36

Pa = (1 − p)ⁿ = 0.95²⁰ = 0.36. 0.05 is the defective fraction; 0.95 is the chance that one unit is good; 0.64 is the probability of rejection.

Question 7 · hard

Why do wet, salty products reduce the sensitivity of a metal detector?

  1. They make stainless steel pieces magnetic and harder to see
  2. They raise the conveyor belt speed automatically
  3. They absorb X-rays more strongly than dry products
  4. Their conductivity masks small metal
Answer and working

D. Their conductivity masks small metal

Conductive products give a signal of their own (product effect); the detector is adjusted to ignore it, which also reduces sensitivity to small metal, especially stainless steel. X-ray absorption is irrelevant to metal detection.

Question 8 · medium

What new requirement did ISO/IEC 17025:2017 add for statements of conformity?

  1. That every result be tested in duplicate by two labs
  2. A documented decision rule that accounts for uncertainty
  3. That all results be reported without uncertainty
  4. That conformity statements be made only by regulators
Answer and working

B. A documented decision rule that accounts for uncertainty

When reporting conformity with a specification, the laboratory must define and agree the decision rule, including how measurement uncertainty is taken into account. The other options are not requirements.

Question 9 · hard

A laboratory reports 10.8 ± 0.6 (U, k = 2) against a reference value of 10.0 ± 0.3 (U). What is the En number, and is it satisfactory?

  1. 0.80; satisfactory
  2. 0.89; satisfactory
  3. 1.33; satisfactory
  4. 1.19; not satisfactory, since |En| > 1
Answer and working

D. 1.19; not satisfactory, since |En| > 1

En = (10.8 − 10.0)/√(0.6² + 0.3²) = 0.8/0.671 = 1.19, which exceeds 1. 0.89 adds the U values linearly; 1.33 divides by 0.6 alone and misjudges the rating; 0.80 omits the denominator.

Question 10 · medium

What distinguishes a certified reference material from an ordinary reference material?

  1. A higher price than in-house controls
  2. Production by the laboratory itself
  3. A matrix identical to every food tested
  4. A certificate with value, uncertainty and traceability
Answer and working

D. A certificate with value, uncertainty and traceability

A CRM is characterised by a metrologically valid procedure and carries a certificate stating the property value, its uncertainty and traceability. Price and matrix are not defining, and in-house materials are not certified.

A study plan for Food Quality Assurance, Statistical Process Control & Laboratory Accreditation in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (54% of the 80 questions): Acceptance sampling and operating characteristic curves (9, 11%); Statistical process control: control charts for variables and attributes (9, 11%); Two- and three-class microbiological sampling plans (9, 11%); ISO 9001 quality management system (8, 10%); Process capability indices (8, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Concepts of quality and quality systems (7, 9%); Total quality management tools (6, 8%); Laboratory quality management and ISO/IEC 17025 (5, 6%); Laboratory accreditation bodies and their role (4, 5%); Measurement uncertainty (4, 5%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Method validation: accuracy, precision, LOD, LOQ and recovery (4, 5%); Proficiency testing and reference materials (3, 4%); Non-destructive quality evaluation and online inspection (2, 3%); Raw-material, in-process and finished-product quality control (2, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Non-destructive quality evaluation and online inspection (1 hard of 2), Raw-material, in-process and finished-product quality control (1 hard of 2), Proficiency testing and reference materials (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: ISO 9001 quality management system (3 easy of 8); Total quality management tools (2 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Food Quality Assurance, Statistical Process Control & Laboratory Accredi

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.