LAISHA
Open Laisha

ICAR AIEEA-PG / PGS Food Quality Assurance, Statistical Process Control & Laboratory Accreditation: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
27written to this exam in this subject
8syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Food Quality Assurance, Statistical Process Control & Laboratory Accreditation in ICAR AIEEA-PG / PGS

Controlling quality in the plant and in the laboratory: quality systems and TQM, control charts and process capability, acceptance sampling and two- and three-class sampling plans, laboratory quality management and ISO/IEC 17025 accreditation, method validation and proficiency testing.

Our 27 ICAR AIEEA-PG / PGS questions in this subject: 8 easy, 18 medium, 1 hard, across 8 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · easy

Which definition of quality is associated with Joseph Juran?

  1. Conformance to requirements as written
  2. Zero defects in every batch produced
  3. Fitness for use
  4. The lowest price for a given specification
Answer and working

C. Fitness for use

Juran defined quality as fitness for use. Conformance to requirements and zero defects are Crosby's ideas; price is not a definition of quality.

Question 2 · easy

Who introduced control charts and the distinction between common-cause and special-cause variation?

  1. Walter Shewhart
  2. Joseph Juran
  3. Genichi Taguchi
  4. Philip Crosby
Answer and working

A. Walter Shewhart

Shewhart developed control charts at Bell Laboratories in the 1920s. Juran described the quality trilogy, Taguchi robust design and the loss function, and Crosby zero defects.

Question 3 · medium

What does Juran's quality trilogy consist of?

  1. Inspection, testing and audit
  2. Plan, do and check
  3. Prevention, appraisal and failure
  4. Quality planning, quality control and quality improvement
Answer and working

D. Quality planning, quality control and quality improvement

Juran's trilogy is planning, control and improvement. Prevention-appraisal-failure is the cost model; plan-do-check(-act) is the PDCA cycle; inspection, testing and audit are activities, not the trilogy.

Question 4 · easy

Which quality tool ranks defect causes in descending order of frequency to show the vital few?

  1. Pareto chart
  2. Histogram
  3. Check sheet
  4. Scatter diagram
Answer and working

A. Pareto chart

A Pareto chart orders categories by size with a cumulative line, showing which few account for most of the problem. Scatter diagrams show relationships, histograms distributions and check sheets collect counts.

Question 5 · medium

What does a scatter diagram of oven temperature against biscuit moisture show?

  1. The frequency distribution of biscuit moisture
  2. Whether the oven is in statistical control
  3. The ranking of defect causes by cost
  4. Whether the two variables appear related
Answer and working

D. Whether the two variables appear related

A scatter diagram plots pairs of values to reveal a possible relationship; it does not prove cause. Distribution needs a histogram, ranking a Pareto chart and control a control chart.

Question 6 · medium

Which clause of ISO 9001:2015 contains internal audit and management review?

  1. Clause 5, leadership
  2. Clause 9, performance evaluation
  3. Clause 7, support
  4. Clause 10, improvement
Answer and working

B. Clause 9, performance evaluation

Clause 9 covers monitoring, measurement, analysis and evaluation, internal audit and management review. Clause 10 covers nonconformity, corrective action and continual improvement.

Question 7 · medium

An X̄-R chart for fill weight uses subgroups of 5, with grand mean 500.0 g and mean range 4.0 g (A₂ = 0.577). What are the X̄ chart control limits?

  1. 496.0 to 504.0 g
  2. 498.8 to 501.2 g
  3. 488.0 to 512.0 g
  4. 497.7 to 502.3 g
Answer and working

D. 497.7 to 502.3 g

Limits = X̄̄ ± A₂R̄ = 500.0 ± 0.577 × 4.0 = 500.0 ± 2.31, i.e. 497.7 to 502.3 g. 488 to 512 uses ±3R̄; 496 to 504 uses ±R̄; 498.8 to 501.2 uses ±0.3R̄.

Question 8 · easy

What does a certificate of analysis from a supplier provide?

  1. A guarantee that every unit is free of defects
  2. The legal standard for the product
  3. Accreditation of the supplier's laboratory
  4. The supplier's test results for a specific lot
Answer and working

D. The supplier's test results for a specific lot

A CoA reports results for a lot against the specification; receiving plants verify CoAs periodically by their own testing. It is not a guarantee, an accreditation or a standard.

Question 9 · medium

How is NIR spectroscopy used for online measurement of moisture and fat?

  1. It counts the fat globules in the product under a microscope
  2. Through chemometric calibrations
  3. It needs no calibration because the spectra are absolute values
  4. It measures moisture directly from the weight loss of the sample
Answer and working

B. Through chemometric calibrations

NIR absorbance at many wavelengths is related to composition through calibrations (for example partial least squares) built against reference analyses; calibrations must be validated and maintained. It is not a drying or microscopy method.

Question 10 · medium

Which technology sorts rice and pulses by ejecting discoloured grains at high speed?

  1. Metal detectors
  2. Optical colour sorters
  3. Checkweighers
  4. Bomb calorimeters
Answer and working

B. Optical colour sorters

Optical sorters view each grain with cameras and eject defective ones with air jets. Metal detectors find metal, checkweighers weigh packs, and calorimeters measure energy.

A study plan for Food Quality Assurance, Statistical Process Control & Laboratory Accreditation in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (59% of the 27 questions): Non-destructive quality evaluation and online inspection (6, 22%); Raw-material, in-process and finished-product quality control (6, 22%); Concepts of quality and quality systems (4, 15%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Total quality management tools (4, 15%); Statistical process control: control charts for variables and attributes (3, 11%); Process capability indices (2, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Acceptance sampling and operating characteristic curves (1, 4%); ISO 9001 quality management system (1, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Process capability indices (1 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Concepts of quality and quality systems (2 easy of 4); Total quality management tools (2 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS Food Quality Assurance, Statistical Process Control & Laboratory Accre

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.