LAISHA
Open Laisha

ICAR AIEEA-PG / PGS Cereal Science & Milling Technology: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
64written to this exam in this subject
12syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Cereal Science & Milling Technology in ICAR AIEEA-PG / PGS

Unit III technology of cereals: milling of wheat, rice and maize, flour quality tests, malting, millets, breakfast cereals and by-products.

The structure and chemistry of cereal grains and millets and how they are milled into flour, semolina, rice and maize products, with the flour quality tests that decide what each flour can make.

Our 64 ICAR AIEEA-PG / PGS questions in this subject: 21 easy, 35 medium, 8 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · easy

Kernel hardness in wheat, which decides how the endosperm fractures in milling, is controlled mainly by:

  1. Bran thickness of the kernel
  2. Gliadin content
  3. Puroindoline genes
  4. Amylose content
Answer and working

C. Puroindoline genes

Puroindolines govern softness; hard wheats give gritty particles and more damaged starch.

Question 2 · hard

Flour streams from the head of the reduction system, compared with those from late break passages, are:

  1. Coarser semolina only
  2. Whiter, with lower ash
  3. Higher in germ oil
  4. Darker, with higher ash
Answer and working

B. Whiter, with lower ash

Head reduction streams come from the purest endosperm; late break streams carry more bran.

Question 3 · easy

The nitrogen-to-protein conversion factor conventionally used for wheat flour is:

  1. 5.7
  2. 6.38
  3. 5.3
  4. 6.25
Answer and working

A. 5.7

5.7 for wheat; 6.25 is the general factor; 6.38 is used for milk.

Question 4 · hard

1,000 kg of paddy gives 700 kg of milled rice, of which 560 kg is head rice. What is the head rice yield as a percentage of paddy?

  1. 80%
  2. 70%
  3. 14%
  4. 56%
Answer and working

D. 56%

560/1,000 = 56% of paddy; 80% is head rice as a share of milled rice.

Question 5 · medium

Malting raises grain moisture during steeping to about:

  1. 20–25%
  2. 70–80%
  3. 12–14%
  4. 42–46%
Answer and working

D. 42–46%

Steeping to 42–46% supports germination.

Question 6 · easy

Rolled oats are produced by:

  1. Puffing oats in a pressure gun
  2. Flattening steamed groats
  3. Grinding hulls with the groats
  4. Extruding oat flour through a die
Answer and working

B. Flattening steamed groats

Cut groats give thinner, quicker flakes; instant oats are thinner still.

Question 7 · easy

Which millet is notably rich in calcium?

  1. Proso millet
  2. Pearl millet (bajra)
  3. Sorghum (jowar)
  4. Finger millet (ragi)
Answer and working

D. Finger millet (ragi)

Finger millet has about 300–350 mg calcium per 100 g.

Question 8 · medium

Rice bran oil is valued for its content of:

  1. γ-Oryzanol and tocotrienols
  2. Erucic acid and gossypol
  3. Lauric acid and myristic acid
  4. Omega-3 EPA and DHA
Answer and working

A. γ-Oryzanol and tocotrienols

Oryzanol and tocotrienols are characteristic; erucic acid is in rapeseed.

Question 9 · medium

In gun puffing, grain expands because:

  1. Sudden pressure release flashes water to steam
  2. Hot oil penetrates and expands the starch
  3. Air is pumped into the grain under vacuum
  4. Carbon dioxide from yeast fermentation inflates it
Answer and working

A. Sudden pressure release flashes water to steam

Steam pressure builds in a sealed chamber and is released instantly.

Question 10 · medium

In extrusion cooking of breakfast cereals, expansion occurs:

  1. In the feed hopper before heating
  2. Only when yeast is added to the feed
  3. As the melt leaves the die and water flashes to steam
  4. During cooling after cutting
Answer and working

C. As the melt leaves the die and water flashes to steam

The pressure drop at the die causes expansion.

A study plan for Cereal Science & Milling Technology in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (41% of the 64 questions): Flour quality: protein, gluten, falling number and ash (7, 11%); Rice milling and parboiling: quality and by-products (7, 11%); Dough rheology tests: farinograph, mixograph, extensograph and alveograph (6, 9%); Dry and wet milling of maize; starch, syrups and germ oil (6, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Structure and composition of wheat, rice, maize, barley, oats, sorghum and millets (6, 9%); Wheat milling: conditioning, break, reduction and flour streams (6, 9%); Malting of barley and other grains (5, 8%); Rice bran stabilisation and by-product utilisation (5, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Starch modification: physical, chemical and enzymatic (5, 8%); Breakfast cereals and instant cereal products (4, 6%); Millet processing and products (4, 6%); Oat milling and beta-glucans (3, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Wheat milling: conditioning, break, reduction and flour streams (2 hard of 6), Flour quality: protein, gluten, falling number and ash (2 hard of 7), Starch modification: physical, chemical and enzymatic (1 hard of 5).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Millet processing and products (3 easy of 4); Structure and composition of wheat, rice, maize, barley, oats, sorghum and millets (3 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS Cereal Science & Milling Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.