ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
62written to this exam in this subject
16syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Packaging Science & Technology in ICAR AIEEA-PG / PGS
Unit III lists functions of packaging, packaging operations, types of containers, form-fill-seal, hermetic closures, canning, packaging materials and package testing. MCQs test materials and their properties, can corrosion and lacquers, retort pouch layers, tests such as burst and tear, and labelling basics.
Packaging as part of the preservation system: materials and their barrier properties, package design and testing, metal cans, glass, paper and plastics, aseptic, modified-atmosphere, active and intelligent packaging, migration and food-contact law, and packaging sustainability. Agricultural Engineering's storage-engineering-packaging covers bulk storage and an introduction to packaging materials; this subject is the full packaging course.
Our 62 ICAR AIEEA-PG / PGS questions in this subject: 19 easy, 41 medium, 2 hard, across 16 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · easy
Vegetable parchment is made by
briefly treating paper with sulphuric acid
coating paper with molten wax
laminating paper to aluminium foil with a wax adhesive layer
A study plan for Food Packaging Science & Technology in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (47% of the 62 questions): Plastics: polymer types, properties and processing (7, 11%); Package testing methods (5, 8%); Paper, paperboard and corrugated packaging (5, 8%); Active packaging: oxygen scavengers, moisture absorbers and antimicrobials (4, 6%); Aseptic packaging systems (4, 6%); Barrier properties: water vapour and oxygen transmission rates (4, 6%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Functions and levels of food packaging (4, 6%); Metal cans: tinplate, tin-free steel and aluminium; corrosion and lacquers (4, 6%); Modified-atmosphere and vacuum packaging (4, 6%); Packaging waste, recycling and extended producer responsibility (4, 6%); Edible and biodegradable packaging (3, 5%); Glass containers (3, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Intelligent packaging: indicators, sensors and RFID (3, 5%); Labelling and coding on packages (3, 5%); Laminates, coextrusion and coatings (3, 5%); Migration and food-contact material regulation (2, 3%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Barrier properties: water vapour and oxygen transmission rates (1 hard of 4), Modified-atmosphere and vacuum packaging (1 hard of 4).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Barrier properties: water vapour and oxygen transmission rates (2 easy of 4); Functions and levels of food packaging (2 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.