ICAR AICE-JRF/SRF Physical Properties, Rheology & Texture of Foods: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
82written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Physical Properties, Rheology & Texture of Foods in ICAR AICE-JRF/SRF
37 Unit 5 is rheology of dairy foods, and 35.b Unit 5 covers emulsions, foams and gels; 41 Unit 1 covers engineering properties of biomaterials. Expect deeper questions on viscoelastic models, oscillatory parameters and gel points, cheese meltability and stretch, glass transition by DSC and DMA, and state diagrams.
Measuring and modelling how foods flow, deform, break and transfer heat: rheometry of fluids and gels, viscoelasticity, texture profile analysis, and thermal, electrical and optical properties. Agricultural Engineering's engineering-properties-biomaterials covers size, shape, density and friction of grains and produce; this subject goes deeper into processed foods and their measurement.
Our 82 ICAR AICE-JRF/SRF questions in this subject: 8 easy, 53 medium, 21 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
The volume mean diameter d43 compared with the Sauter mean d32 for a broad distribution is
smaller, because it weights small particles more
larger, because it weights large particles more
always identical for every distribution
undefined for food powders
Answer and working
B. larger, because it weights large particles more
d43 = Σnd⁴/Σnd³ gives more weight to large particles than d32 = Σnd³/Σnd².
Question 2 · medium
Quality-control methods for thixotropic products specify a resting time before measurement mainly because
the instrument electronics need time to warm up before use
the sample must reach its freezing point
shear history changes the measured viscosity
resting removes all microorganisms
Answer and working
C. shear history changes the measured viscosity
Structure broken during sampling and loading recovers over time; standard rest times give comparable results.
Question 3 · medium
Capillary viscometer data for non-Newtonian fluids require which correction to obtain the true wall shear rate?
Rabinowitsch–Mooney
Stokes–Einstein
Clausius–Clapeyron
Gordon–Taylor
Answer and working
A. Rabinowitsch–Mooney
The Rabinowitsch–Mooney equation corrects the Newtonian apparent wall shear rate for non-Newtonian behaviour.
Question 4 · medium
A laboratory reports viscosity of an oil without stating temperature. The main problem is that
oil viscosity does not depend on temperature
temperature only affects colour
viscosity varies strongly with temperature
temperature affects only non-Newtonian fluids
Answer and working
C. viscosity varies strongly with temperature
Viscosity of liquids is strongly temperature-dependent; methods specify temperature and its control.
Question 5 · hard
In a stress relaxation test on a Maxwell material (λ = 10 s), the initial stress is 100 Pa. After 20 s the stress is about
50.0 Pa
13.5 Pa
36.8 Pa
0 Pa
Answer and working
B. 13.5 Pa
σ = 100 e^(−20/10) = 100 e^(−2) = 13.5 Pa. 36.8 Pa is after one relaxation time (10 s); 50.0 Pa assumes linear decay.
Question 6 · medium
Cohesiveness in TPA is calculated as
first peak force divided by the second
area of the second compression divided by the first
height after the first bite divided by original height
negative area divided by positive area
Answer and working
B. area of the second compression divided by the first
A2/A1 indicates how well the sample withstands a second deformation.
Question 7 · medium
A pizza-cheese supplier must show its cheese melts and stretches well. Suitable tests are
a farinograph and an alveograph on the cheese curd
a Warner–Bratzler shear test
a Schreiber melt test and a strand-stretch test
a falling-number test
Answer and working
C. a Schreiber melt test and a strand-stretch test
Meltability is measured by spread on heating (Schreiber, Arnott); stretch by pulling strands from melted cheese.
Question 8 · medium
The illuminant D65 used in colour measurement represents
Ionic conduction increases the loss factor, so energy is absorbed nearer the surface.
Question 10 · medium
Glass transition temperatures from DSC should be reported with
the colour of the sample
the product's price
only the endpoint temperature, without the method used
onset or midpoint, heating rate and method
Answer and working
D. onset or midpoint, heating rate and method
Tg occurs over a range and depends on heating rate and technique.
A study plan for Physical Properties, Rheology & Texture of Foods in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (48% of the 82 questions): Viscoelasticity: creep, stress relaxation and oscillatory rheology (11, 13%); Texture: texture profile analysis and empirical texture tests (10, 12%); Colour measurement: CIE L*a*b* and colour difference (9, 11%); Physical properties of foods: density, porosity and particle size distribution (9, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Electrical and dielectric properties of foods (7, 9%); Glass transition and state diagrams (7, 9%); Rheology of doughs and dairy gels (6, 7%); Time-dependent flow: thixotropy and rheopexy (6, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Newtonian and non-Newtonian fluids: power-law, Herschel-Bulkley and Casson models (5, 6%); Rotational and capillary viscometry (5, 6%); Thermal properties: specific heat, thermal conductivity and diffusivity of foods (4, 5%); Fundamentals of rheology: stress, strain and viscosity (3, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Electrical and dielectric properties of foods (3 hard of 7), Glass transition and state diagrams (3 hard of 7), Newtonian and non-Newtonian fluids: power-law, Herschel-Bulkley and Casson models (2 hard of 5).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Colour measurement: CIE L*a*b* and colour difference (2 easy of 9); Texture: texture profile analysis and empirical texture tests (2 easy of 10).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.