LAISHA
Open Laisha

ICAR AICE-JRF/SRF Mechanical Unit Operations: Size Reduction, Mixing & Separation: practice questions

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
65written to this exam in this subject
15syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Mechanical Unit Operations: Size Reduction, Mixing & Separation in ICAR AICE-JRF/SRF

35.a Unit 5 covers unit operations of grading, sorting, peeling and size reduction; 37 Unit 4 covers membrane processing; 41 covers post-harvest unit operations, process machinery design and material handling. Expect deeper questions on membrane fouling and diafiltration, compressible cakes, centrifuge sigma theory and supercritical extraction.

The mechanical operations that clean, sort, reduce, mix, homogenise and separate food materials, including filtration, centrifugation and membrane processes, with the design equations used to size them.

Our 65 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 43 medium, 22 hard, across 15 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

Compared with abrasion peeling, flash steam peeling generally gives

  1. higher losses and more wet waste
  2. a raw surface with no heating at all
  3. the same losses but uses sodium hydroxide
  4. lower losses and less effluent
Answer and working

D. lower losses and less effluent

Abrasion peeling rubs off flesh with the skin and needs much water; steam peeling is efficient with little effluent.

Question 2 · hard

A sample contains 3 particles of 10 µm, 2 of 20 µm and 1 of 30 µm. Its Sauter mean diameter d32 is closest to

  1. 23.0 µm
  2. 16.7 µm
  3. 20.0 µm
  4. 25.2 µm
Answer and working

A. 23.0 µm

d32 = (3×1,000 + 2×8,000 + 27,000)/(3×100 + 2×400 + 900) = 46,000/2,000 = 23.0 µm. 16.7 is the number mean; 20.0 is d21; 25.2 is d43.

Question 3 · medium

Laser diffraction particle sizing differs from sieve analysis in that it

  1. measures particle mass directly by weighing each particle on a balance
  2. typically cannot be used for emulsions or for dry powders
  3. always gives the same result as sieving
  4. gives volume-based distributions with fine resolution below 50 µm
Answer and working

D. gives volume-based distributions with fine resolution below 50 µm

Laser diffraction converts light-scattering patterns to volume distributions; methods measure different properties and give different results.

Question 4 · hard

For a powder blend, the variance of the fully segregated mixture is 0.04, of a perfectly random mixture 0.0025, and the measured sample variance 0.01. The Lacey mixing index is closest to

  1. 0.25
  2. 0.80
  3. 0.75
  4. 1.25
Answer and working

B. 0.80

M = (σ0² − s²)/(σ0² − σR²) = 0.03/0.0375 = 0.80. 0.25 is a variance ratio; 0.75 omits σR²; 1.25 inverts the ratio.

Question 5 · hard

In reverse osmosis, transmembrane pressure is 4.0 MPa, osmotic pressure difference 2.0 MPa, permeate viscosity 0.001 Pa s and total resistance 2 × 10¹³ m⁻¹. Using J = (ΔP − Δπ)/(μRt), the flux is closest to

  1. 720 L/m² h
  2. 0.10 L/m² h
  3. 360 L/m² h
  4. 1080 L/m² h
Answer and working

C. 360 L/m² h

J = 2.0 × 10⁶/(10⁻³ × 2 × 10¹³) = 1.0 × 10⁻⁴ m/s = 360 L/m² h. 720 ignores osmotic pressure; 0.10 is per second; 1080 adds osmotic pressure.

Question 6 · hard

Diafiltration in whey protein production means

  1. adding water to the retentate and filtering again to wash out lactose and salts
  2. filtering the permeate a second time to recover more of the protein lost through the membrane
  3. heating the retentate to denature the proteins
  4. drying the retentate in a spray dryer
Answer and working

A. adding water to the retentate and filtering again to wash out lactose and salts

Diluting and re-filtering removes permeable components, raising protein purity, as in whey protein isolates.

Question 7 · hard

Flux in a dairy UF plant falls steadily during each run and recovers after cleaning. The most likely cause is

  1. the membrane becoming more permeable
  2. a drop in feed protein to zero
  3. fouling by proteins and calcium phosphate
  4. excessive cross-flow velocity
Answer and working

C. fouling by proteins and calcium phosphate

Reversible fouling and polarisation lower flux during runs; CIP with alkali, acid and enzymes restores it.

Question 8 · hard

100 kg of water saturated with lactose at 60 °C (solubility 59 g per 100 g water) is cooled to 20 °C (solubility 19 g per 100 g water). Ignoring water of crystallisation, the lactose that can crystallise is about

  1. 19 kg
  2. 59 kg
  3. 78 kg
  4. 40 kg
Answer and working

D. 40 kg

59 − 19 = 40 kg. 19 kg remains dissolved; 59 kg is the total; 78 adds the two.

Question 9 · medium

Palm oil is separated into olein and stearin industrially by

  1. hydrogenation with nickel catalyst
  2. distillation of fatty acids
  3. adding water and centrifuging
  4. dry fractionation: controlled cooling and filtration
Answer and working

D. dry fractionation: controlled cooling and filtration

Controlled crystallisation forms solid stearin, which is filtered from liquid olein.

Question 10 · medium

Small amounts of ethanol are added as a co-solvent to supercritical CO₂ mainly to

  1. lower the critical pressure of CO₂ to atmospheric
  2. make the extract alcoholic for sale
  3. extend extraction to more polar compounds
  4. prevent any extraction of lipids
Answer and working

C. extend extraction to more polar compounds

CO₂ is non-polar; ethanol increases its ability to dissolve polar compounds.

A study plan for Mechanical Unit Operations: Size Reduction, Mixing & Separation in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (43% of the 65 questions): Centrifugation and centrifugal separators (6, 9%); Membrane processes: microfiltration, ultrafiltration, nanofiltration and reverse osmosis (6, 9%); Mixing of solids, pastes and liquids; agitation and power number (6, 9%); Crystallisation (5, 8%); Distillation and supercritical fluid extraction (5, 8%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Filtration: cake filtration theory and filter aids (5, 8%); Sieving and particle-size analysis (5, 8%); Expression and solid-liquid extraction (4, 6%); High-pressure homogenisation (4, 6%); Size-reduction equipment for dry and wet foods (4, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Cleaning, sorting and grading of raw materials (3, 5%); Material handling: conveyors and elevators for foods (3, 5%); Peeling methods (3, 5%); Settling and sedimentation (3, 5%); Size reduction: energy laws of Rittinger, Kick and Bond (3, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Membrane processes: microfiltration, ultrafiltration, nanofiltration and reverse osmosis (4 hard of 6), Mixing of solids, pastes and liquids; agitation and power number (4 hard of 6), Size reduction: energy laws of Rittinger, Kick and Bond (2 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Mechanical Unit Operations: Size Reduction, Mixing & Separation

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.