ICAR AICE-JRF/SRF Novel & Non-thermal Food Processing Technologies: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
70written to this exam in this subject
13syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Novel & Non-thermal Food Processing Technologies in ICAR AICE-JRF/SRF
35.a Unit 1 names non-thermal technologies (microfiltration, bactofugation, high-voltage and pulsed electric fields, high-pressure processing, irradiation, thermosonication), alternate-thermal technologies (ohmic, dielectric, infrared and induction heating) and biological technologies (antibacterial enzymes, bacteriocins); 37 Unit 3 names radiation, microwave, ohmic, high-pressure, PEF, infrared and ultrasonic processing of dairy foods. Expect mechanism, equipment, application and limitation questions, plus calculations of dose, heating rate and log reduction.
The newer ways to make food safe or change its structure with less heat damage: high-pressure processing, pulsed electric fields, ohmic, microwave and radio-frequency heating, irradiation, UV, cold plasma and ultrasound — their mechanisms, equipment, validation and regulatory status.
Our 70 ICAR AICE-JRF/SRF questions in this subject: 12 easy, 35 medium, 23 hard, across 13 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
The isostatic principle in HPP means that
pressure is highest at the package surface
pressure takes hours to reach the centre
large products need longer holding than small ones
pressure is uniform throughout the product
Answer and working
D. pressure is uniform throughout the product
Pressure is transmitted instantly and evenly, unlike heat, so there is no cold spot.
Question 2 · medium
Radio-frequency heating is preferred over 2,450 MHz microwaves for tempering large frozen blocks because RF
penetrates deeper
heats only the surface
needs no electricity
works only on liquids
Answer and working
A. penetrates deeper
Longer wavelengths of RF give deeper, more uniform heating of large blocks.
Bacteriophages used as food processing aids act by
killing all microbes non-selectively
adding acidity
infecting specific bacteria
removing oxygen
Answer and working
C. infecting specific bacteria
Phages are host-specific viruses; specificity is an advantage and a limitation.
Question 8 · medium
A produce washer switches from chlorine to ozone. The key worker-safety control is
monitoring air ozone and destroying off-gas
adding extra chlorine to the wash water at the same time
heating the wash water to 80 °C
stopping all ventilation
Answer and working
A. monitoring air ozone and destroying off-gas
Ozone is toxic at low concentrations; enclosure, monitoring and off-gas destruction are needed.
Question 9 · hard
In the Weibull model, a shape parameter p < 1 indicates
shoulders before inactivation
perfectly linear kinetics
no inactivation
tailing survivor curves
Answer and working
D. tailing survivor curves
p < 1 gives concave-up (tailing) curves; p > 1 gives shoulders.
Question 10 · hard
A company wants to sell shelf-stable low-acid meals made by microwave-assisted sterilisation in the USA. It must
simply label them 'microwaved'
register them as irradiated foods
file the scheduled process with process-authority support
obtain a novel food authorisation from the European Commission first
Answer and working
C. file the scheduled process with process-authority support
Low-acid canned food rules apply; MATS processes have been accepted on this basis.
A study plan for Novel & Non-thermal Food Processing Technologies in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (47% of the 70 questions): High-pressure processing: principles, equipment and microbial inactivation (7, 10%); Ozone and other chemical non-thermal treatments (7, 10%); Validation of novel processes and surrogate organisms (7, 10%); Food irradiation: dose, sources, effects and labelling (6, 9%); Ultrasound in food processing (6, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Cold plasma (5, 7%); Infrared and induction heating (5, 7%); Microwave and radio-frequency heating (5, 7%); Ohmic heating (5, 7%); Pulsed electric fields (5, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Regulatory approval of novel processes (5, 7%); Ultraviolet light and pulsed light (4, 6%); Why non-thermal processing: quality and consumer drivers (3, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Validation of novel processes and surrogate organisms (5 hard of 7), High-pressure processing: principles, equipment and microbial inactivation (4 hard of 7), Microwave and radio-frequency heating (2 hard of 5).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Cold plasma (2 easy of 5); Infrared and induction heating (2 easy of 5).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.