ICAR AICE-JRF/SRF Food Structure, Colloids, Encapsulation & Nanotechnology: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
83written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Structure, Colloids, Encapsulation & Nanotechnology in ICAR AICE-JRF/SRF
How the arrangement of molecules and phases decides texture, stability and digestion: emulsions, foams, gels and their stability, structure-function design, encapsulation and delivery of bioactives, digestion models, and the science and regulation of nanoscale food materials.
Our 83 ICAR AICE-JRF/SRF questions in this subject: 11 easy, 60 medium, 12 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
Which average droplet diameter is most sensitive to a few large droplets formed by coalescence?
Number mean diameter
Modal number diameter
d₄₃ (volume-weighted mean)
d₃₂ (surface-weighted mean)
Answer and working
C. d₄₃ (volume-weighted mean)
d₄₃ = Σnd⁴/Σnd³ weights large droplets heavily; d₃₂ relates to surface area.
Question 2 · easy
What is the approximate surface tension of pure water against air at room temperature?
About 0.7 mN/m
About 300 mN/m
About 72 mN/m
About 7 mN/m
Answer and working
C. About 72 mN/m
Water's hydrogen bonding gives a high value, about 72 mN/m.
Question 3 · medium
Why is two-stage homogenisation used for cream and milk products?
The second stage whips air into the emulsion
The second stage pasteurises the product completely
The second stage removes the emulsifier from droplets
It breaks up droplet clusters
Answer and working
D. It breaks up droplet clusters
A lower-pressure second stage disperses clusters formed after the first stage.
Question 4 · medium
Why is gum arabic an excellent emulsifier for beverage emulsions?
It is a pure protein containing no carbohydrate at all
It raises the interfacial tension of the oil sharply
Protein anchors it; the carbohydrate gives steric repulsion
It forms a firm gel with the calcium in the water
Answer and working
C. Protein anchors it; the carbohydrate gives steric repulsion
The protein-arabinogalactan complex adsorbs and provides a thick steric layer stable to acid and salt.
Question 5 · hard
Why is reformulation to reduce fat often called a structural problem?
Fat is never present in structured foods at all
Removing fat always improves the texture of foods
Fat has no influence on flavour release in the mouth
Fat's texture role comes from its structures
Answer and working
D. Fat's texture role comes from its structures
Replacing composition without rebuilding structure rarely reproduces texture, mouthfeel and flavour release.
Question 6 · medium
What is a key advantage of complex coacervation over spray drying for fish oil?
Much higher payloads
No wall materials are needed at all
Lower cost than any other encapsulation method
It works without any water in the process
Answer and working
A. Much higher payloads
Coacervates can hold well above 50% oil.
Question 7 · medium
Which wall material forms inclusion complexes holding small flavour molecules in a cavity?
Gum arabic
β-Cyclodextrin
Sodium caseinate
Maltodextrin of low DE
Answer and working
B. β-Cyclodextrin
Cyclodextrins have hydrophobic cavities that host small non-polar molecules.
Question 8 · medium
What is spray chilling?
Drying a solution of the wall material in hot air
Freezing a gel of the active in liquid nitrogen
Atomising molten fat with the active into cold air
Coating particles with a polymer in a hot fluid bed
Answer and working
C. Atomising molten fat with the active into cold air
Droplets solidify as lipid matrices that release on melting.
Question 9 · medium
How are chitosan nanoparticles formed by ionic gelation?
Chitosan is cross-linked by tripolyphosphate
Chitosan is precipitated by adding ethanol
Chitosan is melted and extruded into strands
Chitosan is hydrolysed completely to glucosamine
Answer and working
A. Chitosan is cross-linked by tripolyphosphate
Electrostatic cross-linking between protonated amines and TPP forms particles.
Question 10 · hard
Why should in-vitro digestion results on a functional ingredient be followed by human studies before health claims?
A. They omit absorption, regulation and microbiota
Models compare products and mechanisms but cannot capture whole-body physiology.
A study plan for Food Structure, Colloids, Encapsulation & Nanotechnology in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (41% of the 83 questions): Nanoemulsions, liposomes and nanoparticles (9, 11%); Safety assessment and regulation of nanomaterials in food (9, 11%); Emulsion formation and stability mechanisms (8, 10%); In-vitro digestion models and bioaccessibility (8, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Nanotechnology in packaging and sensing (8, 10%); Protein-polysaccharide interactions (8, 10%); Interfacial science: surfactants and proteins at interfaces (7, 8%); Colloidal systems in foods: dispersions, emulsions, foams and gels (6, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Microencapsulation: spray drying, coacervation and extrusion (6, 7%); Structure-function relationships and food structure design (6, 7%); Foams and aerated foods (4, 5%); Protein and polysaccharide gels (4, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Foams and aerated foods (1 hard of 4), Protein and polysaccharide gels (1 hard of 4), Colloidal systems in foods: dispersions, emulsions, foams and gels (1 hard of 6).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Nanotechnology in packaging and sensing (2 easy of 8); Nanoemulsions, liposomes and nanoparticles (2 easy of 9).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.