ICAR AIEEA-PG / PGS New Food Product Development & Formulation: practice questions
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
43written to this exam in this subject
12syllabus units
About ICAR AIEEA-PG / PGS
ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
New Food Product Development & Formulation in ICAR AIEEA-PG / PGS
Unit III product development and judging of food products: formulation, sensory evaluation, labelling and legal aspects of new products.
Taking a food from idea to launch: consumer insight, stage-gate development, formulation and reformulation, prototype and pilot-scale trials, optimisation by experimental design, costing, shelf-life and regulatory checks, labelling and test marketing.
Our 43 ICAR AIEEA-PG / PGS questions in this subject: 23 easy, 12 medium, 8 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.
Question 1 · medium
Which stage comes immediately before development in a typical stage-gate process?
Post-launch review
Building the business case
Launch
Testing and validation
Answer and working
B. Building the business case
Scoping, business case, development, testing, launch.
Question 2 · easy
Partial replacement of salt with potassium chloride is limited mainly by:
Its high cost
Bitter, metallic taste
Its sweetness
Its colour
Answer and working
B. Bitter, metallic taste
Bitter blockers can help.
Question 3 · medium
Which salt-reduction strategy uses smaller salt crystals on snack surfaces?
Adding more fat
Changing particle size
Replacing salt with sugar
Raising pH
Answer and working
B. Changing particle size
More salt contacts the tongue.
Question 4 · hard
A product lasts 2 months at 35 °C in accelerated storage. With Q10 = 2, what shelf life is predicted at 25 °C?
4 months
8 months
1 month
2 months
Answer and working
A. 4 months
2 × 2^((35 − 25)/10) = 4 months; confirm in real time.
Question 5 · easy
Contribution per unit is:
Ingredient cost plus packaging
Selling price minus variable cost
Retail price minus tax
Fixed cost divided by units
Answer and working
B. Selling price minus variable cost
It covers fixed costs, then profit.
Question 6 · medium
Before launch, every additive in a new product must be checked to be:
Cheaper than sugar
Permitted in that category
Natural in origin
Produced in the same country
Answer and working
B. Permitted in that category
For each target market.
Question 7 · easy
Which packaging property matters most for crisp, low-moisture biscuits?
High oxygen permeability
Heat sealability only
Transparency
Low water vapour transmission
Answer and working
D. Low water vapour transmission
They lose crispness by absorbing moisture.
Question 8 · medium
Retortable pouches must withstand:
Retort temperatures and pressures
Only freezing temperatures
Only humidity
Only light exposure
Answer and working
A. Retort temperatures and pressures
See thermal-processing-canning.
Question 9 · easy
The triangle test is used to determine whether:
Consumers like a product
Products differ perceptibly
A product is safe
A price is acceptable
Answer and working
B. Products differ perceptibly
Assessors pick the odd one of three samples.
Question 10 · easy
The 9-point hedonic scale measures:
Purchase price
Sweetness intensity
Microbial count
Degree of liking
Answer and working
D. Degree of liking
From dislike extremely to like extremely.
A study plan for New Food Product Development & Formulation in ICAR AIEEA-PG / PGS
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (40% of the 43 questions): Reformulation for salt, sugar and fat reduction (5, 12%); Concept development and screening (4, 9%); Formulation principles and ingredient selection (4, 9%); Optimisation by experimental design (4, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Prototype, pilot plant and scale-up trials (4, 9%); The stage-gate development process (4, 9%); Consumer trends and sources of product ideas (3, 7%); Intellectual property: patents, trademarks and trade secrets (3, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Packaging selection for new products (3, 7%); Product costing (3, 7%); Regulatory and labelling checks for a new product (3, 7%); Test marketing and commercial launch (3, 7%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Concept development and screening (2 hard of 4), Prototype, pilot plant and scale-up trials (2 hard of 4), Product costing (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Consumer trends and sources of product ideas (2 easy of 3); Intellectual property: patents, trademarks and trade secrets (2 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.