LAISHA
Open Laisha

ICAR AIEEA-PG / PGS Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
46written to this exam in this subject
14syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes in ICAR AIEEA-PG / PGS

Building, running and auditing a food safety management system: prerequisite programmes and good manufacturing practice, the seven HACCP principles applied in depth, preventive controls, ISO 22000 and the GFSI-benchmarked certification schemes, food defence, food safety culture, traceability and recall, and auditing practice.

Our 46 ICAR AIEEA-PG / PGS questions in this subject: 22 easy, 20 medium, 4 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · easy

Good manufacturing practice in a food plant is best described as:

  1. A set of critical limits monitored continuously at each critical control point in the process
  2. Basic conditions and practices for producing safe, suitable food across the whole site
  3. A statistical sampling plan used to accept or reject finished product lots before dispatch
  4. A certification scheme benchmarked by the Global Food Safety Initiative for retailers
Answer and working

B. Basic conditions and practices for producing safe, suitable food across the whole site

GMP covers buildings, equipment, water, cleaning, pests, hygiene and training across the site. Critical limits belong to CCPs; GFSI schemes include GMP but are not GMP itself.

Question 2 · medium

Which change was introduced by the 2020 revision of the Codex General Principles of Food Hygiene?

  1. Removal of the hazard analysis principle from the HACCP system
  2. Management commitment to a positive food safety culture as a foundation
  3. A requirement that every food business must use at least ten CCPs
  4. Replacement of HACCP with end-product testing for small businesses
Answer and working

B. Management commitment to a positive food safety culture as a foundation

The 2020 revision added food safety culture, GHPs needing greater attention, allergen management and validation in principle 6.

Question 3 · easy

Under Codex, a critical limit is defined as a criterion that:

  1. States the minimum number of staff on each production shift
  2. Sets the maximum number of samples tested per production lot
  3. Separates acceptability from unacceptability of the food at a CCP
  4. Defines the shelf life printed on the label of the product
Answer and working

C. Separates acceptability from unacceptability of the food at a CCP

A critical limit is an observable or measurable criterion relating to a control measure at a CCP that separates acceptable from unacceptable food.

Question 4 · medium

Why must the flow diagram be confirmed on site during operation?

  1. Unrecorded steps such as temporary holding are found only by walking the line
  2. The diagram is used to calculate the critical limits for each step directly
  3. Confirmation replaces the need for a hazard analysis of each step
  4. Regulations require the diagram to be signed by a government inspector each year
Answer and working

A. Unrecorded steps such as temporary holding are found only by walking the line

Walking the line finds steps, holding points and practices missing from the drawing; hazards at unrecorded steps would otherwise be missed.

Question 5 · medium

In hazard analysis, the significance of a hazard is judged mainly from:

  1. The number of customer complaints received about it last year
  2. Whether a competitor has already listed it in their plan
  3. Likelihood without control and severity of the effect
  4. The cost of controlling it and the plant's profit margin
Answer and working

C. Likelihood without control and severity of the effect

Codex bases significance on likelihood and severity, with supporting evidence from literature, outbreaks, guidance and plant data.

Question 6 · hard

Under the US Food Code, cooked food being cooled must go from 57 °C to 21 °C within 2 hours and to 5 °C within a further:

  1. 2 hours
  2. 8 hours
  3. 6 hours
  4. 4 hours
Answer and working

D. 4 hours

The Food Code allows 2 hours from 57 °C to 21 °C and a further 4 hours to 5 °C or below, 6 hours in total. 6 hours is the total, not the second stage.

Question 7 · easy

Which tool is commonly used for root cause analysis after a deviation?

  1. The Codex decision tree
  2. A flow diagram
  3. A three-class sampling plan
  4. The five whys
Answer and working

D. The five whys

Asking 'why' repeatedly, and fishbone diagrams, help find the cause; the decision tree identifies CCPs.

Question 8 · easy

ISO 22000 was first published in:

  1. 1995
  2. 1987
  3. 2015
  4. 2005
Answer and working

D. 2005

ISO 22000 was first published in 2005 and revised in 2018.

Question 9 · medium

The addition of melamine to milk in China in 2008 was intended to:

  1. Preserve milk without refrigeration during transport
  2. Improve the white colour of milk powder for consumers
  3. Increase the fat content measured by the Gerber test
  4. Raise apparent protein measured as nitrogen
Answer and working

D. Raise apparent protein measured as nitrogen

Melamine is nitrogen-rich, so it inflated protein estimates from nitrogen; infants fed contaminated formula developed kidney stones.

Question 10 · easy

A typical food safety management system certification cycle lasts:

  1. Ten years with surveillance every two years
  2. Three years with annual surveillance audits
  3. Five years with a single audit at the end
  4. One year with no surveillance audits
Answer and working

B. Three years with annual surveillance audits

Certification is commonly granted for three years, with surveillance audits each year and recertification before expiry.

A study plan for Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (50% of the 46 questions): HACCP: preliminary steps and hazard analysis (6, 13%); Codex General Principles of Food Hygiene (5, 11%); HACCP: critical control points, critical limits and monitoring (5, 11%); Operational prerequisite programmes and preventive controls (4, 9%); Allergen management programmes (3, 7%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Food defence and vulnerability assessment (3, 7%); Good manufacturing and good hygiene practices (3, 7%); HACCP: corrective actions, verification, validation and records (3, 7%); ISO 22000 food safety management system (3, 7%); Prerequisite programmes (3, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Traceability, withdrawal and recall (3, 7%); Food safety culture (2, 4%); Internal and third-party auditing (2, 4%); GFSI-benchmarked schemes: FSSC 22000, BRCGS and SQF (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: HACCP: critical control points, critical limits and monitoring (2 hard of 5), Traceability, withdrawal and recall (1 hard of 3), HACCP: preliminary steps and hazard analysis (1 hard of 6).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Internal and third-party auditing (2 easy of 2); Allergen management programmes (2 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.