LAISHA
Open Laisha

ICAR AIEEA-PG / PGS Shelf-life Science & Food Stability: practice questions

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
38written to this exam in this subject
11syllabus units

About ICAR AIEEA-PG / PGS

ICAR AIEEA-PG / PGS — Code 18 Food Science Technology is a postgraduate admission exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice, +4/−1 marking.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Shelf-life Science & Food Stability in ICAR AIEEA-PG / PGS

Unit I names physicochemical changes during processing and storage; Unit IV names intrinsic and extrinsic factors in microbial growth. MCQs test aw limits, reaction orders, date-marking terms and hurdle concepts.

Predicting and proving how long a food stays safe and acceptable: the kinetics of quality loss, temperature and water-activity effects, accelerated shelf-life testing, packaging-limited shelf life, challenge tests and date labelling.

Our 38 ICAR AIEEA-PG / PGS questions in this subject: 13 easy, 21 medium, 4 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG / PGS and are not shown on any other exam's page.

Question 1 · easy

Biscuits that become soft but remain safe are an example of

  1. safety-limited shelf life caused by pathogen growth
  2. an unlimited shelf life with no deterioration at all
  3. a microbiological hazard requiring a use-by date
  4. quality-limited shelf life
Answer and working

D. quality-limited shelf life

Loss of crispness is a quality change; the product remains safe.

Question 2 · medium

Vitamin C in a juice degrades by first-order kinetics with k = 0.010 per day. The time to fall to 80 % of its initial value is about

  1. 20.0 days
  2. 8.0 days
  3. 22.3 days
  4. 80.0 days
Answer and working

C. 22.3 days

t = ln(1/0.80)/0.010 = 0.2231/0.010 = 22.3 days. 20.0 assumes zero order (0.20/0.010); 8.0 and 80.0 are slips.

Question 3 · medium

Lipid oxidation in many foods shows

  1. an induction period followed by rapid acceleration
  2. a constant rate of change from the first day of storage
  3. an instant end-point at packing
  4. no dependence on oxygen
Answer and working

A. an induction period followed by rapid acceleration

Antioxidants are consumed during induction; simple models fit only after it.

Question 4 · medium

Q10 is defined as

  1. the rate ratio for a 10 °C rise
  2. the shelf life at 10 °C
  3. the activation energy divided by 10
  4. the number of days per 10 % quality loss
Answer and working

A. the rate ratio for a 10 °C rise

Q10 = k(T + 10)/k(T) = ts(T)/ts(T + 10).

Question 5 · hard

A pack holds 200 g dry solids at 2.0 % moisture (dry basis); the critical moisture is 3.5 %. Area is 0.04 m² and WVTR 2.0 g/m² day. The constant-rate moisture-limited shelf life is

  1. 37.5 days
  2. 87.5 days
  3. 1.5 days
  4. 75.0 days
Answer and working

A. 37.5 days

Allowed gain = 200 × 0.015 = 3.0 g; daily gain = 2.0 × 0.04 = 0.08 g; ts = 37.5 days. 87.5 uses 3.5 % as the allowance; 1.5 omits area and mass; 75.0 uses 0.04 g/day.

Question 6 · medium

Lipid oxidation in a dry food is slowest at about

  1. the highest possible water activity
  2. an aw of zero
  3. the monolayer water activity
  4. an aw of 0.99
Answer and working

C. the monolayer water activity

Below the monolayer oxidation speeds up; at intermediate aw it also rises.

Question 7 · easy

A 'best-before' date indicates

  1. the end of the period of expected quality
  2. the last day on which the food is safe to eat
  3. the date of manufacture
  4. the retailer's stock-rotation date
Answer and working

A. the end of the period of expected quality

Beyond best-before the food may still be safe; use-by marks safety.

Question 8 · medium

A 'sell-by' or 'display until' date is

  1. a legal safety limit for consumers
  2. a retailer's stock-control date
  3. the date of manufacture
  4. the date a challenge test ended
Answer and working

B. a retailer's stock-control date

It is not intended for consumers and can add to confusion and waste.

Question 9 · medium

Codex allows some foods to carry no date mark, such as

  1. chilled ready meals
  2. salt, sugar and vinegar
  3. fresh minced meat
  4. pasteurised milk
Answer and working

B. salt, sugar and vinegar

Very stable foods and fresh fruit and vegetables may be exempt; perishable foods are not.

Question 10 · medium

Xerophilic moulds and osmophilic yeasts can grow down to a water activity of about

  1. 0.61
  2. 0.95
  3. 0.85
  4. 0.20
Answer and working

A. 0.61

They are the most tolerant organisms; no microbial growth occurs below about 0.6.

A study plan for Shelf-life Science & Food Stability in ICAR AIEEA-PG / PGS

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (61% of the 38 questions): Shelf life of specific product groups (9, 24%); Kinetics of quality loss: zero- and first-order reactions (5, 13%); Water activity, sorption isotherms and moisture-limited shelf life (5, 13%); Date marking: use-by, best-before and expiry (4, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Shelf-life concepts: safety-limited and quality-limited shelf life (4, 11%); Temperature dependence: Arrhenius equation and Q10 (4, 11%); Packaging-limited shelf life and permeability calculations (3, 8%); Accelerated shelf-life testing and its limits (1, 3%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Microbial challenge tests and durability studies (1, 3%); Sensory end-points and survival analysis (1, 3%); Time-temperature integrators (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Packaging-limited shelf life and permeability calculations (2 hard of 3), Temperature dependence: Arrhenius equation and Q10 (1 hard of 4), Water activity, sorption isotherms and moisture-limited shelf life (1 hard of 5).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Accelerated shelf-life testing and its limits (1 easy of 1); Microbial challenge tests and durability studies (1 easy of 1).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG / PGS Shelf-life Science & Food Stability

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.