ICAR AICE-JRF/SRF Concentrated & Dried Dairy Products: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
57written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Concentrated & Dried Dairy Products in ICAR AICE-JRF/SRF
Subject 34 Unit 6: heat stability, age gelation of UHT and concentrated milk, compositional differences between condensed and evaporated milk, structure and properties of dried milk and instant powder, spoilage of powder. Subject 37 Unit 3: advances in drying, freeze drying, glass transition, water activity and sorption, hurdle technology.
Evaporated and sweetened condensed milk, milk powders and their functional properties, storage and defects.
Our 57 ICAR AICE-JRF/SRF questions in this subject: 1 easy, 33 medium, 23 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
A fat-filled milk powder of 26% fat is made from skim milk powder (1% fat) and vegetable fat, ignoring moisture. Per 100 kg of product, how much vegetable fat is used?
73.74 kg
25.25 kg
26.00 kg
26.26 kg
Answer and working
B. 25.25 kg
Fat: 0.01S + F = 26 with S + F = 100, so 0.99F = 25, F = 25.25 kg and S = 74.75 kg. 26.00 kg ignores the fat in the powder; 26.26 kg divides by 0.99 without subtracting the powder fat; 73.74 kg is close to the powder mass, not the fat.
Question 2 · hard
Concentrating milk lowers its heat stability mainly because:
Whey proteins leave with the water vapour in the evaporator
Lactose is removed and casein loses its main stabilising sugar
Calcium ions and protein become more concentrated and pH falls
Fat globules grow larger and coat the casein micelles
Answer and working
C. Calcium ions and protein become more concentrated and pH falls
Higher calcium activity and protein concentration with a small pH drop favour coagulation on heating.
Question 3 · medium
The heat coagulation time of milk is the time to visible coagulation at a set temperature. It depends most strongly on:
Lactose crystal size
Fat content
Colour
pH
Answer and working
D. pH
Milk shows a characteristic heat coagulation time–pH profile.
Question 4 · medium
Age gelation of evaporated milk during storage is accelerated by:
Low forewarming and high storage temperature
Fast homogenisation and a short storage period
High sugar ratio and seeding
High forewarming and cold storage
Answer and working
A. Low forewarming and high storage temperature
Protein interactions build slowly, faster at warm temperatures and with less forewarming.
Question 5 · medium
Lecithin is sprayed onto agglomerated whole milk powder to:
Prevent Maillard browning during long storage
Increase the fat content to above 42%
Make the particle surface wettable in cold water
Reduce the WPNI to a high-heat value
Answer and working
C. Make the particle surface wettable in cold water
Lecithin's hydrophilic groups counter surface free fat.
Question 6 · hard
Why is WPNI alone not enough to guarantee a powder's suitability for recombined evaporated milk?
WPNI measures only the fat in the powder
WPNI cannot distinguish low-heat from high-heat powders
Heat stability depends on more than whey denaturation
WPNI rises during sterilisation of the concentrate
Answer and working
C. Heat stability depends on more than whey denaturation
Salt balance and other factors affect heat stability, so a separate test is used.
Question 7 · hard
Why can WPNI vary with season even at constant processing?
Lactose content changes the nitrogen reading
The test reagents change with outdoor temperature
Spray dryer efficiency changes with daylight
Milk whey protein content varies with lactation and season
Answer and working
D. Milk whey protein content varies with lactation and season
WPNI reflects initial whey protein as well as heat history.
Question 8 · medium
In straight-through agglomeration, fines from the cyclones are:
Packed separately as a cheap feed powder
Returned to the atomiser zone to meet moist droplets
Dissolved in the concentrate before evaporation
Discarded as waste because they cannot be reused
Answer and working
B. Returned to the atomiser zone to meet moist droplets
Fines stick to moist droplets and build agglomerates.
Question 9 · hard
Why is dairy whitener more prone to caking than skim milk powder?
Sugar makes it hygroscopic and lowers its glass transition
Added sugar raises its fat content and causes oxidation
Added sugar removes the lactose
Added sugar raises its WPNI
Answer and working
A. Sugar makes it hygroscopic and lowers its glass transition
Sugars plasticise and attract water.
Question 10 · medium
Which salt is used in creamers to prevent feathering?
Magnesium sulphate solution
Sodium nitrate
Dipotassium phosphate
Calcium chloride
Answer and working
C. Dipotassium phosphate
Buffering phosphates raise pH and bind calcium; calcium salts would worsen feathering.
A study plan for Concentrated & Dried Dairy Products in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (40% of the 57 questions): Evaporated milk: process and heat stability (6, 11%); Spray drying of milk: process and powder properties (6, 11%); Sweetened condensed milk: sugar ratio and lactose crystallisation (6, 11%); Dairy whiteners and filled milk powders (5, 9%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Heat classification of milk powders: WPNI (5, 9%); Powder fires and explosions: safety (5, 9%); Water activity, sorption and glass transition in powders (5, 9%); Agglomeration and instantising (4, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Defects of condensed milks (4, 7%); Roller drying (4, 7%); Whole, skim and instant milk powders (4, 7%); Powder storage, caking and Maillard browning (3, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Spray drying of milk: process and powder properties (4 hard of 6), Dairy whiteners and filled milk powders (3 hard of 5), Sweetened condensed milk: sugar ratio and lactose crystallisation (3 hard of 6).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Heat classification of milk powders: WPNI (1 easy of 5).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.