ICAR AICE-JRF/SRF Ice Cream & Frozen Dairy Desserts: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
47written to this exam in this subject
11syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Ice Cream & Frozen Dairy Desserts in ICAR AICE-JRF/SRF
Subject 34 Unit 8: ice cream composition and physical structure, changes during ageing, freezing and hardening, defects, role and mechanism of stabilisers and emulsifiers, kulfi composition and differences from ice cream. Subject 37 Unit 1: technology of frozen desserts. Expect conceptual and mechanistic questions on partial coalescence, recrystallisation and sandiness.
Mix formulation and calculation, freezing, overrun, hardening and the structure and defects of ice cream and related products.
Our 47 ICAR AICE-JRF/SRF questions in this subject: 1 easy, 24 medium, 22 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
Why does a minimum weight-per-volume rule matter for ice cream manufacturers?
It sets the minimum freezing temperature for storage in shops
It fixes the maximum sugar content that may be used in mix
It caps how much air, as overrun, can be sold as product
It requires all ice cream to be hardened in tunnels below −30 °C
Answer and working
C. It caps how much air, as overrun, can be sold as product
With a given mix density, a minimum weight per litre sets a maximum overrun.
Question 2 · medium
Too much emulsifier in an ice cream mix is likely to cause:
A sandy texture from lactose crystals
An icy texture from large ice crystals formed during slow hardening
A gummy body from excess hydrocolloid
A buttery texture from excessive fat destabilisation
Answer and working
D. A buttery texture from excessive fat destabilisation
Excess emulsifier drives too much coalescence, giving perceptible fat particles.
Question 3 · medium
Increasing dasher speed in a freezer tends to:
Lower fat destabilisation and remove frictional heat
Stop air incorporation completely
Have no effect on product structure at all
Raise fat destabilisation and add frictional heat
Answer and working
D. Raise fat destabilisation and add frictional heat
More shear means more coalescence but also heat input.
Question 4 · medium
Which mix change generally improves air incorporation?
Higher total solids and protein with proper ageing
Lower total solids with no stabiliser at all
Skipping ageing to keep the fat liquid
Removing all emulsifiers from the mix
Answer and working
A. Higher total solids and protein with proper ageing
Solids, protein and aged, emulsifier-treated fat help whip and hold air.
Question 5 · medium
During hardening, most additional ice forms by:
Freezing of the fat phase
Growth of existing crystals
Crystallisation of lactose
Nucleation of entirely new crystals
Answer and working
B. Growth of existing crystals
Few new nuclei form after the freezer; existing crystals enlarge.
Question 6 · easy
Physically, ice cream is best described as:
A partly frozen foam with ice, air and fat in unfrozen serum
An oil-in-water emulsion with no air cells
A frozen sugar solution with no dispersed phases of any kind in it
A gel of casein with trapped sugar crystals
Answer and working
A. A partly frozen foam with ice, air and fat in unfrozen serum
Ice crystals, air cells and partly coalesced fat are dispersed in a freeze-concentrated serum.
Question 7 · medium
What stabilises the air cells in ice cream?
Dissolved sugar that thickens the air itself
Partly coalesced fat and adsorbed protein at their surfaces
Lactose crystals that form a shell round each cell
Ice crystals that freeze onto the cell walls only
Answer and working
B. Partly coalesced fat and adsorbed protein at their surfaces
Fat clusters and proteins at the interface stabilise the foam.
Question 8 · medium
Which is a protein-based fat replacer used in reduced-fat ice cream?
Polydextrose, a glucose polymer
Inulin
Microparticulated whey protein
Maltodextrin
Answer and working
C. Microparticulated whey protein
Microparticulated whey protein mimics fat by tiny particles; the others are carbohydrate-based.
Question 9 · medium
Coarse, icy texture in ice cream is most often caused by:
Lactose crystals from too much MSNF
Air cells from low overrun
Large ice crystals from slow freezing or heat shock
Fat particles from an excessive emulsifier dose
Answer and working
C. Large ice crystals from slow freezing or heat shock
At a constant storage temperature, which change still slowly coarsens ice crystals?
Sublimation of air from the cells into the ice
Conversion of ice into glassy lactose crystals
Ostwald ripening of small crystals into larger ones
Nucleation of many new small crystals in the serum
Answer and working
C. Ostwald ripening of small crystals into larger ones
Even without cycling, small crystals dissolve and large ones grow, though far more slowly than under heat shock.
A study plan for Ice Cream & Frozen Dairy Desserts in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (51% of the 47 questions): Ice cream structure: ice crystals, air cells, fat network (7, 15%); Hardening, storage and heat shock (6, 13%); Ice cream ingredients and their functions (6, 13%); Mix calculation: serum point and algebraic methods (5, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Reduced-fat and reduced-sugar ice cream (5, 11%); Freezing: batch and continuous freezers (4, 9%); Kulfi, frozen yoghurt, sherbet and frozen confections (4, 9%); Defects and their causes (3, 6%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Mix processing: pasteurisation, homogenisation and ageing (3, 6%); Overrun calculation and control (3, 6%); Classes of frozen desserts and their standards (1, 2%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Classes of frozen desserts and their standards (1 hard of 1), Mix calculation: serum point and algebraic methods (4 hard of 5), Mix processing: pasteurisation, homogenisation and ageing (2 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Ice cream structure: ice crystals, air cells, fat network (1 easy of 7).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.