ICAR AICE-JRF/SRF General Microbiology: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
21written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
General Microbiology in ICAR AICE-JRF/SRF
Microbial cells, growth, metabolism, genetics and laboratory technique: the base for every dairy microbiology subject.
Our 21 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 1 medium, 20 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
Pure starter cultures replaced spontaneous souring of cream for butter making in northern Europe around:
1790
1890
1950
1840
Answer and working
B. 1890
Storch in Denmark and Weigmann in Germany introduced pure cultures for cream ripening around 1890, after pure-culture methods became available.
Question 2 · hard
Which concern of dairy microbiology is addressed mainly by the selection, propagation and protection of starter cultures?
Safety from pathogens
Fermentation
Spoilage by psychrotrophs
Water activity of powders
Answer and working
B. Fermentation
Dairy microbiology deals with quality (spoilage), safety (pathogens and toxins) and fermentation (starters and probiotics). Starter selection serves fermentation.
Question 3 · hard
Which instrument would best show the three-dimensional surface of a biofilm on a stainless-steel coupon at high magnification?
Transmission electron microscope
Bright-field light microscope
Dark-field condenser on a light microscope
Scanning electron microscope
Answer and working
D. Scanning electron microscope
SEM images coated surfaces with great depth of field. TEM needs ultrathin sections; light microscopes lack the resolution. Confocal microscopy is an alternative for hydrated biofilms.
Question 4 · hard
The extreme heat resistance of bacterial endospores is attributed chiefly to:
A thick outer membrane of lipopolysaccharide that excludes water at high temperature
Very high concentrations of catalase and superoxide dismutase in the spore coat
Plasmids that carry heat-shock genes expressed only during sporulation
A dehydrated core with calcium dipicolinate and DNA-protecting proteins
Answer and working
D. A dehydrated core with calcium dipicolinate and DNA-protecting proteins
Core dehydration, calcium dipicolinate, protective SASPs and the cortex and coats account for spore resistance. LPS is not part of Gram-positive spores.
Question 5 · hard
Late blowing of hard cheeses is traced to spores that survive pasteurisation. Their usual source on the farm is:
Teat dips containing iodophor at high concentration
Water used to wash the bulk tank after milking
Concentrate feeds that were dried at high temperature before feeding
Silage contaminated with Clostridium tyrobutyricum spores
Answer and working
D. Silage contaminated with Clostridium tyrobutyricum spores
Poorly fermented silage carries high numbers of C. tyrobutyricum spores, which pass through the cow into faeces and onto teats. In cheese they ferment lactate to butyrate, CO₂ and H₂.
Question 6 · hard
CRISPR–Cas systems protect bacteria against phages by:
Modifying the cell-wall receptor so that phages cannot adsorb
Killing the infected cell before progeny phages can be assembled
Storing phage DNA spacers and cutting matching DNA on reinfection
Methylating host DNA so that the phage restriction enzyme ignores it
Answer and working
C. Storing phage DNA spacers and cutting matching DNA on reinfection
CRISPR is adaptive immunity: spacers guide Cas nucleases to matching phage DNA. Receptor changes and abortive infection are separate defences. Its function was first shown in S. thermophilus.
Question 7 · hard
A starter strain carrying an inducible prophage can still cause phage problems in a plant because:
Prophages make the strain resistant to all other dairy phages
Lysogens cannot ferment lactose until the prophage is lost
Induced prophages release phages able to infect other strains
Prophage DNA is destroyed by pasteurisation of the milk
Answer and working
C. Induced prophages release phages able to infect other strains
Induced prophages can lyse their host and produce particles that infect sensitive strains, introducing new phages into the factory.
Question 8 · hard
A Gram-negative rod from pasteurised milk gives the IMViC pattern + + − −. It is most likely:
Enterobacter aerogenes
Escherichia coli
Pseudomonas fluorescens
Klebsiella pneumoniae
Answer and working
B. Escherichia coli
Typical E. coli is indole +, methyl red +, Voges–Proskauer −, citrate −; E. aerogenes is − − + +. Pseudomonads are non-fermenters.
Question 9 · hard
Ultraviolet light causes mutations mainly by forming:
Double-strand breaks across the whole chromosome
Alkylated guanine residues
Thymine dimers between adjacent pyrimidines
Deaminated adenine residues
Answer and working
C. Thymine dimers between adjacent pyrimidines
UV near 260 nm links adjacent pyrimidines; error-prone repair introduces mutations. Ionising radiation causes strand breaks; alkylating agents and nitrous acid alter bases.
Question 10 · hard
A sanitiser reduces a test organism with a D value of 0.5 min. How long must surfaces be exposed to achieve a 5-log reduction?
0.1 min
5.0 min
2.5 min
10.0 min
Answer and working
C. 2.5 min
Time = log reductions × D = 5 × 0.5 = 2.5 min. Dividing 0.5 by 5 gives 0.1 min.
A study plan for General Microbiology in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (48% of the 21 questions): Bacteriophages (3, 14%); History and scope of microbiology (3, 14%); Bacterial cell structure: wall, membrane, capsule, flagella, spores (2, 10%); Effect of temperature, pH, water activity and oxygen on growth (2, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Growth curve, generation time and growth measurement (2, 10%); Microbial genetics: mutation, plasmids, transformation, conjugation, transduction (2, 10%); Sterilisation and disinfection (2, 10%); Aseptic technique and pure-culture methods (1, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Classification of bacteria, yeasts, moulds and viruses (1, 5%); Microbial metabolism: respiration and fermentation (1, 5%); Microbial nutrition and culture media (1, 5%); Microscopy: light, phase, fluorescence and electron (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Bacteriophages (3 hard of 3), Bacterial cell structure: wall, membrane, capsule, flagella, spores (2 hard of 2), Effect of temperature, pH, water activity and oxygen on growth (2 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.