ICAR AICE-JRF/SRF Milk Composition & Physical Properties: practice questions
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering · India · NTA for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
50written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD): Dairy Chemistry, Dairy Microbiology, Dairy Technology, Dairy Engineering is a PhD, fellowship and lectureship exam run by NTA for ICAR, for candidates in India.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Milk Composition & Physical Properties in ICAR AICE-JRF/SRF
Milk constituents and their distribution between phases, species differences, colostrum, and the physical properties of milk with their causes: freezing point and its constancy, buffering and the role of colloidal calcium phosphate, redox potential, viscosity and surface tension. Expect reasoning questions on why a property changes in mastitic, late-lactation, watered or soured milk.
What milk is made of, how composition varies, and the physical properties used to test and process it.
Our 50 ICAR AICE-JRF/SRF questions in this subject: 7 easy, 26 medium, 17 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · easy
In typical cow milk, casein makes up roughly what share of total protein?
About 50 per cent
About 20 per cent
About 80 per cent
About 95 per cent
Answer and working
C. About 80 per cent
Casein is about 80% of cow milk protein (about 2.6% of milk) and whey proteins about 20%. 20% is the whey share; 50% is closer to human milk, which is whey-dominant.
Question 2 · hard
Camel milk coagulates poorly with calf rennet. Which feature of its proteins is the main reason?
An unusually high content of colloidal calcium phosphate
A high proportion of beta-lactoglobulin that coats the micelles
Little kappa-casein and larger micelles
An absence of beta-casein, the main substrate of chymosin
Answer and working
C. Little kappa-casein and larger micelles
Camel milk has little kappa-casein (the chymosin substrate whose cleavage starts coagulation) and large micelles, and bovine chymosin acts slowly on camel kappa-casein. It has no beta-lactoglobulin at all, and beta-casein is its major casein.
Question 3 · medium
At which stage of lactation are the fat and protein contents of cow milk usually lowest?
Around peak yield, roughly the second month
At exactly the midpoint of a 305-day lactation
In the last month before drying off
Usually in the first three days after calving
Answer and working
A. Around peak yield, roughly the second month
After colostrum, fat and protein fall to their lowest near peak yield (about month 2), then rise as yield declines, so late-lactation milk is richer. The first days after calving give colostrum, the richest secretion.
Question 4 · medium
A farm uses a hydrometer-type colostrometer to check colostrum. What property does it actually measure?
Electrical conductivity, which rises in direct proportion to the immunoglobulin content
Refractive index, which falls as immunoglobulin content rises
Specific gravity, which rises with immunoglobulin and total solids content
Viscosity, read from the time taken to drain a fixed volume
Answer and working
C. Specific gravity, which rises with immunoglobulin and total solids content
A colostrometer is a hydrometer reading specific gravity, which correlates with immunoglobulin content. A Brix refractometer, the other farm tool, reads refractive index, which rises (not falls) with solids.
Question 5 · medium
The surface tension of milk at 20 degrees Celsius is about:
45 to 52 millinewtons per metre
72 to 73 millinewtons per metre
20 to 25 millinewtons per metre
90 to 100 millinewtons per metre
Answer and working
A. 45 to 52 millinewtons per metre
Proteins, phospholipids and fatty acids adsorb at the surface and lower milk's surface tension to about 45-52 mN/m; water is about 72-73.
Question 6 · easy
The specific heat of whole milk is about:
1.0 kilojoule per kilogram per kelvin
3.9 kilojoules per kilogram per kelvin
2.1 kilojoules per kilogram per kelvin
4.18 kilojoules per kilogram per kelvin
Answer and working
B. 3.9 kilojoules per kilogram per kelvin
Whole milk is about 3.9 kJ/kg K, slightly below water (4.18) because solids, especially fat, have lower specific heat.
Question 7 · hard
How does heat treatment affect the redox potential of milk?
It lowers Eh by exposing sulfhydryl groups of denatured whey proteins and expelling oxygen
It raises Eh by oxidising lactose into lactobionic acid and dissolving extra oxygen from the air
It has no effect, because redox potential is fixed by pH alone
It raises Eh because heating dissolves more oxygen in the milk
Answer and working
A. It lowers Eh by exposing sulfhydryl groups of denatured whey proteins and expelling oxygen
Denatured beta-lactoglobulin exposes -SH groups and heating drives off oxygen, giving a reducing environment that protects heated products from oxidised flavour. Hot liquids hold less oxygen, not more.
Question 8 · medium
Why is a low redox potential important inside a ripening cheese?
It prevents any microbial growth, so ripening is purely enzymatic
It raises the pH of the cheese to above 7.0
It keeps lactose from being fermented during ripening
It favours the anaerobic and facultative organisms and reactions of ripening
Answer and working
D. It favours the anaerobic and facultative organisms and reactions of ripening
Cheese interiors have a negative Eh, which suits facultative and anaerobic starter and non-starter bacteria and influences flavour chemistry; it does not stop microbial growth.
Question 9 · medium
A Brix refractometer is used on a farm to judge colostrum quality. Why does it work?
Refractive index rises with total solids, which correlate with immunoglobulin content
Brix reading measures conductivity, which rises with immunoglobulins
Refractive index falls as fat rises, and fat correlates with immunoglobulins
Brix reading measures lactose, which is highest in the best colostrum
Answer and working
A. Refractive index rises with total solids, which correlate with immunoglobulin content
The Brix reading rises with dissolved solids; in colostrum these are dominated by immunoglobulins. Lactose is low in colostrum.
Question 10 · easy
Camel milk is notably richer than cow milk in which vitamin?
Vitamin D
Vitamin B12
Vitamin A
Vitamin C
Answer and working
D. Vitamin C
Camel milk contains several times more vitamin C than cow milk, important in arid diets.
A study plan for Milk Composition & Physical Properties in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (42% of the 50 questions): Species differences: cow, buffalo, goat, sheep, camel, human (6, 12%); Buffer capacity and acid-base equilibria (5, 10%); Electrical conductivity, refractive index and thermal properties (5, 10%); Gross composition of milk and its normal ranges (5, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Variation with breed, feed, season, lactation stage and mastitis (5, 10%); Viscosity, surface tension and interfacial tension (5, 10%); Acidity and pH; titratable acidity (4, 8%); Colour and optical properties of milk (4, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Oxidation-reduction potential (4, 8%); Colostrum and abnormal milks (3, 6%); Density and specific gravity; lactometer readings (2, 4%); Freezing point and its use in detecting added water (2, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Variation with breed, feed, season, lactation stage and mastitis (3 hard of 5), Oxidation-reduction potential (2 hard of 4), Density and specific gravity; lactometer readings (1 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Colostrum and abnormal milks (2 easy of 3); Colour and optical properties of milk (1 easy of 4).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.