LAISHA
Open Laisha

GATE XE Mathematics for Food Science & Engineering: practice questions

GATE — Engineering Sciences (XE), Section G Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)

Original practice questions written to the published syllabus · not past papers
10worked here, free
80written to this exam in this subject
13syllabus units

About GATE XE

GATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.

Source: gate2026.iitg.ac.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Mathematics for Food Science & Engineering in GATE XE

The calculus, linear algebra, differential equations and numerical methods behind every food engineering calculation: heat penetration curves, drying rates, reaction kinetics and process optimisation. GATE XE makes this section compulsory for every candidate who takes the Food Technology section.

Our 80 GATE XE questions in this subject: 28 easy, 43 medium, 9 hard, across 13 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GATE XE and are not shown on any other exam's page.

Question 1 · medium

What is the limit of (1 − cos x)/x² as x approaches 0?

  1. 1
  2. 0
  3. 1/2
  4. 2
Answer and working

C. 1/2

Using cos x ≈ 1 − x²/2, the numerator ≈ x²/2, so the ratio → 1/2. L'Hôpital twice gives sin x/(2x) then cos x/2 → 1/2. 1 drops the factorial 2!; 0 stops after one application, before the form is resolved; 2 inverts the answer.

Question 2 · easy

What is the coefficient of x³ in the Maclaurin series of eˣ?

  1. 1/6
  2. 1
  3. 1/3
  4. 1/24
Answer and working

A. 1/6

eˣ = 1 + x + x²/2! + x³/3! + …, so the x³ coefficient is 1/3! = 1/6. 1/3 omits the factorial; 1 treats every coefficient as 1; 1/24 is the x⁴ coefficient.

Question 3 · easy

For f(x, y) = x²y + 3y², what is ∂f/∂y?

  1. x² + 3y
  2. 2xy + 6y
  3. 2xy
  4. x² + 6y
Answer and working

D. x² + 6y

Holding x constant: ∂(x²y)/∂y = x² and ∂(3y²)/∂y = 6y, giving x² + 6y. 2xy is ∂f/∂x; 2xy + 6y mixes the two partials; x² + 3y forgets to differentiate 3y² properly.

Question 4 · easy

What is the value of the integral of e^(−2x) from 0 to infinity?

  1. 1
  2. 0.5
  3. ∞
  4. 2
Answer and working

B. 0.5

∫₀^∞ e^(−ax) dx = 1/a, so with a = 2 the value is 0.5. 2 is a rather than 1/a; 1 is the case a = 1; the integral converges because the exponent is negative.

Question 5 · easy

What is the sum of the series 1 + 1/2 + 1/4 + 1/8 + …?

  1. 1
  2. 2
  3. 1.5
  4. The series diverges
Answer and working

B. 2

A geometric series with a = 1 and r = 1/2 sums to a/(1 − r) = 1/(1/2) = 2. 1 stops at the first term; 1.5 at the second; a geometric series with |r| < 1 converges.

Question 6 · medium

What is the radius of convergence of the power series Σ xⁿ/3ⁿ?

  1. 1
  2. ∞
  3. 1/3
  4. 3
Answer and working

D. 3

aₙ = 3^(−n), and R = lim|aₙ/aₙ₊₁| = 3. Equivalently it is a geometric series in x/3, converging for |x/3| < 1, i.e. |x| < 3. 1/3 inverts the ratio; 1 is the radius for Σxⁿ; ∞ is for eˣ.

Question 7 · medium

What is the integrating factor for dy/dx + 2y/x = x?

  1. 2 ln x
  2. x²
  3. e^(2x)
  4. 1/x²
Answer and working

B. x²

For dy/dx + P(x)y = Q(x), the integrating factor is e^(∫P dx) = e^(2 ln x) = x². e^(2x) treats P as the constant 2; 2 ln x is the exponent, not the factor; 1/x² has the sign of the exponent reversed.

Question 8 · easy

Which is the condition for M(x, y)dx + N(x, y)dy = 0 to be an exact equation?

  1. ∂M/∂x = ∂N/∂y
  2. M = N on the whole domain
  3. ∂M/∂y = ∂N/∂x
  4. ∂M/∂y = −∂N/∂x
Answer and working

C. ∂M/∂y = ∂N/∂x

The equation is exact if there is a function ψ with ψ_x = M and ψ_y = N, which requires ψ_xy = ψ_yx, i.e. ∂M/∂y = ∂N/∂x. The other conditions are not the exactness test; the reversed-sign version resembles a Cauchy-Riemann equation.

Question 9 · medium

For the same data (y = 1, 4, 9, 16, 25 at x = 1 to 5, h = 1), what does Simpson's one-third rule give for the integral?

  1. 55.00
  2. 41.33
  3. 41.00
  4. 42.00
Answer and working

B. 41.33

Simpson: (h/3)[y₀ + 4(y₁ + y₃) + 2y₂ + y₄] = (1/3)[1 + 80 + 18 + 25] = 124/3 = 41.33, exact because Simpson's rule integrates polynomials up to degree three exactly. 42.00 is the trapezoidal result; 55.00 is the sum of ordinates; 41.00 rounds the weights wrongly.

Question 10 · medium

How does the global error of Euler's method change when the step size is halved?

  1. It roughly quarters
  2. It does not change
  3. It falls by a factor of about sixteen
  4. It roughly halves
Answer and working

D. It roughly halves

Euler's method is first order: global error ∝ h, so halving h roughly halves it. Quartering corresponds to a second-order method such as Heun's; a factor of sixteen to fourth-order Runge-Kutta.

A study plan for Mathematics for Food Science & Engineering in GATE XE

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (44% of the 80 questions): Definite, improper and double integrals and their applications (7, 9%); First-order and second-order ordinary differential equations (7, 9%); Limits, continuity, mean value theorems and Taylor's theorem (7, 9%); Matrices, determinants, rank and systems of linear equations (7, 9%); Partial derivatives, maxima and minima and Lagrange multipliers (7, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Sequences, series, power series and Fourier series (7, 9%); Complex numbers, analytic functions and Cauchy-Riemann equations (6, 8%); Eigenvalues, eigenvectors and the Cayley-Hamilton theorem (6, 8%); Numerical methods: Gauss elimination, LU decomposition, interpolation and Newton-Raphson (6, 8%); Vector calculus: gradient, divergence, curl and Green's theorem (6, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Numerical integration and Euler's method for ODEs (5, 6%); Partial differential equations: one-dimensional heat equation and Laplace equation by separation of variables (5, 6%); Applications in food science: first-order kinetics, exponential decay and logarithmic survivor curves (4, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Applications in food science: first-order kinetics, exponential decay and logarithmic survivor curves (1 hard of 4), Partial differential equations: one-dimensional heat equation and Laplace equation by separation of variables (1 hard of 5), Complex numbers, analytic functions and Cauchy-Riemann equations (1 hard of 6).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Definite, improper and double integrals and their applications (3 easy of 7); Limits, continuity, mean value theorems and Taylor's theorem (3 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GATE XE Mathematics for Food Science & Engineering

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.