LAISHA
Open Laisha

GATE — Engineering Sciences (XE), Section G Food Technology

India · IITs and IISc on rotation (2027: IIT Madras)

1947practice questions written to this syllabus
42subjects

What GATE is

GATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India.

Format

Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.

Sections

How it has changed

The 2026 XE-G and XE-A syllabus PDFs were read in full. XE-G Section 3 lists processing principles, packaging, cereal, oil, fruit and vegetable, plantation crop, milk and animal product processing, waste utilisation, and food standards (FPO, PFA, A-Mark, ISI, HACCP, CIP). Section 4 lists mass and energy balance, momentum, heat and mass transfer, mechanical and thermal operations and psychrometry. Used for M.Tech/PhD admission at IITs and other institutes and for some PSU screening. Laisha has not yet counted marks per section in past papers.

How to prepare for GATE

Where our 1947 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (63% of the questions): Food Chemistry II: Pigments, Flavours, Vitamins, Minerals, Enzymes & Browning (120); General Microbiology (106); Human Nutrition & Nutritional Quality of Processed Foods (103); Beverage Technology: Soft Drinks, Tea, Coffee, Cocoa & Alcoholic Beverages (103); Food Microbiology: Spoilage, Pathogens & Detection (100); Fruit & Vegetable Processing Technology (99); Food Chemistry I: Water, Carbohydrates, Proteins & Lipids (90); Transport Phenomena in Food Processing: Fluid Flow, Heat & Mass Transfer (88); Mechanical Unit Operations: Size Reduction, Mixing & Separation (83); Mathematics for Food Science & Engineering (80); Evaporation, Dehydration & Concentration of Foods (72); Chilling, Freezing & Frozen Food Technology (59); and 2 more.

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Thermal Processing & Canning Technology (52); Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes (46); Spices, Herbs, Essential Oils & Flavour Technology (43); Food Packaging Science & Technology (43); Functional Foods, Nutraceuticals & Health Claims (41); Meat, Poultry & Egg Products Technology (40); Extrusion & Texturisation Technology (38); Fish & Seafood Processing Technology (38); Statistics, Experimental Design & Chemometrics for Food Science (34); Principles of Food Science & Food Preservation (34); Fats & Oils Technology (34); Physical Properties, Rheology & Texture of Foods (30); and 2 more.

    One pass per subject, then mixed sets across them.

  3. Lighter: Food Additives & Ingredient Technology (28); Fermentation Technology & Food Biotechnology (27); Shelf-life Science & Food Stability (26); Bakery, Pasta & Snack Food Technology (22); Food Plant Design, Hygienic Engineering, Utilities & Automation (20); Pulses, Oilseeds & Plant Protein Technology (19); Food Plant Sanitation, Cleaning & Pest Management (15); Food Waste Valorisation, By-products & Sustainable Food Processing (14); Food Law, Standards & Regulatory Affairs Worldwide (10); Traditional, Ethnic & Indigenous Foods Technology (9); Food Toxicology, Contaminants & Allergens (5); Advanced Analytical Techniques & Foodomics (2); and 2 more.

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Extrusion & Texturisation Technology (11 hard of 38), Transport Phenomena in Food Processing: Fluid Flow, Heat & Mass Transfer (25 hard of 88), Shelf-life Science & Food Stability (7 hard of 26).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: gate2026.iitg.ac.in

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. Idli batter is leavened mainly by:

  1. Baker's yeast added to the batter
  2. Lactic acid bacteria such as Leuconostoc mesenteroides
  3. Aspergillus oryzae growing on the rice
  4. Sodium bicarbonate added before steaming
Answer and working

B. Lactic acid bacteria such as Leuconostoc mesenteroides

Black gram mucilage holds the gas.

Pulses, Oilseeds & Plant Protein Technology · Soaking, germination, cooking, roasting and fermentation of legumes

2. Genistein and daidzein, found in soy, belong to the class of

  1. Anthocyanins
  2. Carotenoids
  3. Isoflavones
  4. Glucosinolates
Answer and working

C. Isoflavones

They are isoflavones, with weak oestrogen-like activity. Anthocyanins are berry pigments, carotenoids are fat-soluble pigments, and glucosinolates come from cruciferous vegetables.

Functional Foods, Nutraceuticals & Health Claims · Bioactive compounds: polyphenols, carotenoids, phytosterols and peptides

3. Porosity strongly lowers the thermal conductivity of a dry food mainly because

  1. air in the pores conducts heat better than water
  2. porosity increases the specific heat of the solids
  3. pores always fill with ice during storage
  4. air in the pores conducts heat very poorly
Answer and working

D. air in the pores conducts heat very poorly

Air (about 0.025 W/m K) is a good insulator, so porous foods conduct poorly.

Physical Properties, Rheology & Texture of Foods · Physical properties of foods: density, porosity and particle size distribution

4. Mill bagasse usually leaves the last mill at about 50% moisture. For its use as boiler fuel, this moisture

  1. Raises the heat released per kilogram burnt
  2. Has no effect because water does not burn
  3. Is needed to make bagasse ignite at all
  4. Lowers the useful heat, as water must evaporate
Answer and working

D. Lowers the useful heat, as water must evaporate

Part of the combustion heat is used to evaporate the water and leaves with the flue gas, so the net calorific value of wet bagasse is much lower than that of dry fibre. Better final-mill dewatering or flue-gas bagasse dryers improve boiler efficiency. Water cannot add heat, it clearly does affect the heat balance, and drier bagasse burns more readily, not less.

Sugar, Sweeteners, Chocolate & Confectionery Technology · Sugar by-products: molasses, bagasse and press mud

5. Viruses were first recognised when tobacco mosaic disease was shown to be caused by an agent that:

  1. Was killed by boiling but not by filtering
  2. Grew on agar but only in the dark
  3. Passed through bacteria-proof filters
  4. Was visible as rods under oil immersion
Answer and working

C. Passed through bacteria-proof filters

Ivanovsky and Beijerinck found that the infectious agent passed bacteria-proof filters; Beijerinck called it a contagium vivum fluidum.

General Microbiology · History and scope of microbiology

6. How does IARC classify acrylamide?

  1. Group 1, carcinogenic to humans with sufficient evidence
  2. Group 2A, probably carcinogenic
  3. Not evaluated by IARC
  4. Group 3, not classifiable at all
Answer and working

B. Group 2A, probably carcinogenic

IARC placed acrylamide in Group 2A in 1994.

Food Chemistry II: Pigments, Flavours, Vitamins, Minerals, Enzymes & Browning · Acrylamide and other process contaminants from browning

7. Four replicate determinations of sugar content gave 8, 10, 12 and 10 g per 100 g. What is the sample standard deviation (n − 1 denominator)?

  1. 1.41 g per 100 g
  2. 2.67 g per 100 g
  3. 1.63 g per 100 g
  4. 2.00 g per 100 g
Answer and working

C. 1.63 g per 100 g

Mean = 10; squared deviations 4, 0, 4, 0 sum to 8. Sample variance = 8/3 = 2.67; SD = √2.667 = 1.63. 1.41 uses n = 4 (the population formula), and 2.67 is the variance, not its square root.

Statistics, Experimental Design & Chemometrics for Food Science · Descriptive statistics and probability distributions: binomial, Poisson and normal

8. In an ICMSF two-class sampling plan, the symbol c means:

  1. The number of sample units tested from the lot
  2. The limit separating acceptable from unacceptable counts
  3. The upper limit separating marginal from unacceptable counts
  4. The maximum number of sample units allowed to exceed m
Answer and working

D. The maximum number of sample units allowed to exceed m

n is the number of units tested, m the limit, c the maximum number of defective units allowed; M is used only in three-class plans.

Food Microbiology: Spoilage, Pathogens & Detection · Microbiological criteria and sampling plans

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 1,947 questions — GATE — Engineering Sciences (XE), Section G Food Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.