LAISHA
Open Laisha

ICAR AICE-JRF/SRF Bakery, Pasta & Snack Food Technology: practice questions

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
12syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Bakery, Pasta & Snack Food Technology in ICAR AICE-JRF/SRF

Deeper questions on staling mechanisms and enzymes, gluten-free formulation, pasta drying, frying heat and mass transfer and oil uptake, and acrylamide mitigation.

The science of bread, biscuits, cakes, pasta and snacks: ingredient functions, dough development, fermentation, baking, staling, and frying of snacks, with the defects and their causes.

Our 22 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 4 medium, 18 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · hard

Why is L-cysteine or sodium metabisulphite added to some biscuit and cracker doughs?

  1. To prevent mould growth in the packed biscuits
  2. To strengthen gluten for higher volume
  3. To feed yeast in long fermentations
  4. To relax the gluten
Answer and working

D. To relax the gluten

Reducing agents break disulphide bonds, relaxing hard doughs.

Question 2 · hard

In lean bread dough without added sugar, yeast continues to produce gas during proof mainly from:

  1. Maltose from starch hydrolysis
  2. Lactose naturally present in the flour
  3. Glycerol formed from fat
  4. Sucrose from the bran
Answer and working

A. Maltose from starch hydrolysis

Free sugars are used first, then maltose from starch hydrolysis.

Question 3 · hard

During baking, closed gas cells in dough become an interconnected sponge because:

  1. Yeast digests the walls between cells
  2. Steam injection dissolves the crumb
  3. Fat melts and dissolves the gluten
  4. Cells rupture as the structure sets
Answer and working

D. Cells rupture as the structure sets

The foam converts to a sponge, giving open crumb.

Question 4 · hard

Why is steam injected at the start of baking for some breads?

  1. To cool the dough and slow oven spring
  2. To kill the yeast before baking starts
  3. To delay crust setting
  4. To dissolve sugar on the crust and stop browning
Answer and working

C. To delay crust setting

Condensing steam keeps the surface extensible and gelatinises surface starch.

Question 5 · hard

Radio-frequency post-baking dryers reduce checking because they:

  1. Add moisture to the biscuit edges
  2. Dry the moist centre preferentially
  3. Melt the fat to fill the cracks
  4. Cool biscuits rapidly to room temperature
Answer and working

B. Dry the moist centre preferentially

Uniform moisture removes the gradient that causes stress.

Question 6 · hard

Why are gluten-free breads made from batters rather than doughs?

  1. Batters prevent cross-contact with wheat
  2. Doughs cannot be baked without gluten
  3. Gluten-free flours contain too much protein
  4. No gluten network forms a dough
Answer and working

D. No gluten network forms a dough

Viscous batters with hydrocolloids hold gas instead.

Question 7 · hard

Transglutaminase is used in some gluten-free products to:

  1. Cross-link proteins
  2. Hydrolyse starch to sugars
  3. Break down phytate
  4. Prevent Maillard browning
Answer and working

A. Cross-link proteins

It forms covalent bonds between protein chains.

Question 8 · medium

Kettle chips are harder and crunchier than continuously fried chips because:

  1. They are baked rather than fried
  2. They are fried at much higher constant temperatures
  3. Oil temperature drops in batch frying
  4. They are made from dehydrated potato dough
Answer and working

C. Oil temperature drops in batch frying

The temperature profile changes texture.

Question 9 · hard

Too low a frying temperature generally causes:

  1. Less oil uptake and darker colour
  2. More oil uptake and pale colour
  3. Burnt surfaces and raw centres
  4. Faster oil degradation and smoking
Answer and working

B. More oil uptake and pale colour

Too high a temperature burns the surface and degrades oil.

Question 10 · hard

Why are statistical process control charts used for loaf weight?

  1. To control yeast activity during proof
  2. To predict staling rate from weight
  3. To measure crumb grain automatically
  4. To keep weights within specification
Answer and working

D. To keep weights within specification

Underweight packs breach legal metrology rules; overweight wastes product.

A study plan for Bakery, Pasta & Snack Food Technology in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (41% of the 22 questions): Gluten-free and high-fibre bakery products (3, 14%); Bakery equipment and quality control (2, 9%); Baking: heat transfer and physicochemical changes (2, 9%); Cakes and batters (2, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Deep-fat frying: heat and mass transfer and oil uptake (2, 9%); Dough development and fermentation (2, 9%); Pasta and noodle technology (2, 9%); Snack foods: chips, extruded and fried snacks (2, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Staling and its control (2, 9%); Biscuits, cookies and crackers (1, 5%); Bread-making processes: straight dough, sponge-and-dough and continuous (1, 5%); Functions of bakery ingredients: flour, water, yeast, salt, sugar, fat and improvers (1, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Baking: heat transfer and physicochemical changes (2 hard of 2), Deep-fat frying: heat and mass transfer and oil uptake (2 hard of 2), Dough development and fermentation (2 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Bakery, Pasta & Snack Food Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.