ICAR AICE-JRF/SRF Fats & Oils Technology: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
26written to this exam in this subject
13syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Fats & Oils Technology in ICAR AICE-JRF/SRF
35.a Unit 2 oilseed processing and vanaspati: enzymatic degumming, physical refining, contaminants in refining, zero-trans technologies, structured lipids and cocoa butter equivalents.
From oilseed to finished fat: mechanical expression and solvent extraction, refining, bleaching and deodorisation, fat modification by hydrogenation, interesterification and fractionation, and the fat products — margarine, shortening, vanaspati and specialty fats — made from them.
Our 26 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 11 medium, 15 hard, across 13 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
Cocoa butter melts sharply just below body temperature because its triacylglycerols are mainly:
Random mixtures of all fatty acids
Triolein and trilinolein
Trilaurin and trimyristin
Symmetrical POP, POS and SOS
Answer and working
D. Symmetrical POP, POS and SOS
Oleic acid in the middle position with saturated acids outside.
Question 2 · medium
Cold-pressed (virgin) oils differ from refined oils mainly because they:
Have higher smoke points
Retain flavour and minor components
Contain no free fatty acids at all
Are always solvent extracted afterwards
Answer and working
B. Retain flavour and minor components
They are not refined.
Question 3 · medium
Extractors work counter-current so that:
Fresh flakes meet fresh solvent first
Fresh solvent meets spent flakes
Solvent and flakes never mix
All flakes see the same solvent
Answer and working
B. Fresh solvent meets spent flakes
This maximises extraction efficiency.
Question 4 · medium
The WHO REPLACE action package for eliminating industrial trans fat was launched in:
2003
2023
2018
2010
Answer and working
C. 2018
Denmark limited trans fat in 2003.
Question 5 · hard
OPO structured lipids are used in infant formula because they:
Supply omega-3 fatty acids
Put palmitic acid at sn-2
Contain no saturated fatty acids at all
Raise the melting point above 60 °C
Answer and working
B. Put palmitic acid at sn-2
Improving fat and calcium absorption.
Question 6 · hard
Solvent fractionation gives sharper separation than dry fractionation mainly because:
Less liquid is entrained in crystals
Solvents hydrogenate the fat
Crystals do not form in solvent
Solvents remove all free fatty acids
Answer and working
A. Less liquid is entrained in crystals
It is used for high-value fractions.
Question 7 · medium
EU law allows chocolate to contain up to what proportion of non-cocoa vegetable fats from six named sources?
10%
25%
5%
1%
Answer and working
C. 5%
The six sources are named in law, and labelling is required.
Question 8 · hard
What happens if lauric CBS is mixed with substantial cocoa butter?
Faster tempering
Higher snap and gloss
No change at all
Soft texture and bloom
Answer and working
D. Soft texture and bloom
The fats are incompatible.
Question 9 · medium
An oil has a peroxide value of 5 and an anisidine value of 10. What is its Totox value?
15
20
50
25
Answer and working
B. 20
Totox = 2 × 5 + 10 = 20.
Question 10 · hard
Why does a low peroxide value not prove that a used frying oil is of good quality?
Frying oils contain no unsaturated fat
Peroxide value rises only in solid fats
The test cannot be applied to vegetable oils
Hydroperoxides decompose at high temperature
Answer and working
D. Hydroperoxides decompose at high temperature
Secondary products accumulate instead.
A study plan for Fats & Oils Technology in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (46% of the 26 questions): Neutralisation, bleaching and deodorisation; physical refining (3, 12%); Specialty fats and cocoa butter equivalents (3, 12%); By-products of oil refining (2, 8%); Degumming and lecithin recovery (2, 8%); Fractionation (2, 8%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Frying oil deterioration and management (2, 8%); Hydrogenation and trans fatty acids (2, 8%); Interesterification: chemical and enzymatic (2, 8%); Mechanical expression and expellers (2, 8%); Oil quality tests: acid value, peroxide value, iodine value and saponification value (2, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Solvent extraction and desolventising (2, 8%); Margarine, shortening and vanaspati (1, 4%); Sources and composition of edible oils and fats (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Neutralisation, bleaching and deodorisation; physical refining (3 hard of 3), Fractionation (2 hard of 2), Interesterification: chemical and enzymatic (2 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.