ICAR AICE-JRF/SRF Food Microbiology: Spoilage, Pathogens & Detection: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
17written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Food Microbiology: Spoilage, Pathogens & Detection in ICAR AICE-JRF/SRF
35.b Units 2–4: risk analysis, food law with two- and three-class sampling plans and FSSAI microbiological criteria, rapid methods, and food microbiology in depth. Deeper questions on predictive models, qPCR interpretation, WGS in outbreak investigation, biofilm control and the probability of lot acceptance.
Which microorganisms grow in which foods and why, the pathogens and toxins behind food-borne disease, and the methods — conventional, rapid and molecular — used to find them. The PG units on predictive microbiology and genomic surveillance carry it beyond the hygiene-focused milk and meat microbiology in the Veterinary track (milk-meat-hygiene-food-safety).
Our 17 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 2 medium, 15 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
Hurdle technology, as developed by Leistner, is best described as:
Applying one severe preservation step that is sufficient on its own to sterilise the food completely
Combining mild preservation factors that together prevent growth with less damage to quality
Adding a sequence of chemical preservatives at doses each high enough to stop growth individually
Storing a food under a fluctuating temperature regime that repeatedly shocks the microflora
Answer and working
B. Combining mild preservation factors that together prevent growth with less damage to quality
The idea is that factors such as reduced aw, low pH, mild heat, preservatives and chilling, each sub-inhibitory alone, combine to stabilise the food. A single severe step is the opposite approach.
Question 2 · hard
Canned strawberries soften and disintegrate after a normal pasteurisation process. The organisms most likely responsible are:
Heat-resistant moulds such as Byssochlamys with ascospores that survive mild heat
Pseudomonas species entering through the seam during water cooling of the cans
Lactic acid bacteria that grow in the syrup and produce dextran from sucrose
Proteolytic Clostridium botulinum that grows because the fruit is a low-acid food
Answer and working
A. Heat-resistant moulds such as Byssochlamys with ascospores that survive mild heat
Byssochlamys fulva and B. nivea produce heat-resistant ascospores and pectinolytic enzymes that soften fruit. Strawberries are acid, so C. botulinum is not the concern.
Question 3 · hard
Salmonella has caused large outbreaks from chocolate, peanut butter and milk powder although it cannot grow in these foods. The best explanation is that:
It survives for long periods at low water activity, and fat may protect it during digestion
It grows slowly at water activities down to 0.60 when the storage temperature is high
It produces a preformed heat-stable toxin in the raw ingredients before processing
It forms heat-resistant spores that may germinate once the product is reconstituted with water
Answer and working
A. It survives for long periods at low water activity, and fat may protect it during digestion
Salmonella does not grow below about 0.93–0.95 aw but survives drying for months; in fatty foods the infectious dose can be very low. It is not a spore-former and does not cause intoxication.
Question 4 · hard
Enterotoxin-producing Clostridium perfringens strains were classically called type A. Under the revised toxinotyping scheme published in 2018, most such food-poisoning strains are placed in:
Type B
Type G
Type F
Type D
Answer and working
C. Type F
The 2018 scheme created type F for strains carrying the enterotoxin gene without beta, epsilon or iota toxin, and type G for NetB-producing strains linked to necrotic enteritis in poultry.
Question 5 · hard
Why is sampling, rather than analysis, the largest source of error in determining aflatoxin in a lot of groundnuts?
Aflatoxin moves between kernels during storage, so the lot changes after sampling
The toxin is concentrated in a few highly contaminated kernels, so its distribution is very uneven
Immunoaffinity columns retain the toxin unpredictably between replicate extractions of one ground sample
Aflatoxin degrades rapidly in ground samples before they reach the laboratory
Answer and working
B. The toxin is concentrated in a few highly contaminated kernels, so its distribution is very uneven
A small fraction of kernels can carry most of the toxin, so small samples give highly variable results. Regulations therefore require large aggregate samples that are ground and subsampled.
Question 6 · hard
A food contains 1 Salmonella cell in a 25 g portion homogenised in 225 mL of enrichment broth. The organism doubles every 30 min with no lag, and a lateral flow test detects 10^5 CFU/mL. About how long must the enrichment run?
12.3 h
8.3 h
6.1 h
24.6 h
Answer and working
A. 12.3 h
Starting concentration = 1/250 mL = 0.004 CFU/mL. Doublings = log2(10^5/0.004) = log2(2.5 × 10^7) = 24.6. Time = 24.6 × 0.5 h = 12.3 h. 24.6 h treats doublings as hours.
Question 7 · medium
In the Weibull inactivation model, a shape parameter p less than 1 describes:
A survivor curve with a shoulder
A survivor curve with tailing
A curve showing regrowth after heating
A straight log-linear survivor curve
Answer and working
B. A survivor curve with tailing
p < 1 gives an upward-concave curve that tails; p > 1 gives a shoulder; p = 1 reduces to the log-linear (D value) model.
Question 8 · hard
Milk powder plants often find thermophilic spore-formers in the product even though the milk was pasteurised. A common source is:
Growth of Listeria in the finished powder during dry storage at room temperature for months
Biofilms of Pseudomonas in the raw milk silos that survive spray drying
Biofilms of lactic acid bacteria on the outer packaging of the powder
Biofilms of thermophilic bacilli such as Anoxybacillus and Geobacillus in evaporators
Answer and working
D. Biofilms of thermophilic bacilli such as Anoxybacillus and Geobacillus in evaporators
Thermophilic bacilli form biofilms on warm surfaces in evaporators and shed spores into the product during long runs.
Question 9 · hard
A lot has 10% of its units contaminated. Using a two-class plan with c = 0, how does increasing n from 5 to 60 change the probability of acceptance?
From 0.59 to about 0.002
From 0.50 to about 0.05
From 0.90 to about 0.54
From 0.59 to about 0.10
Answer and working
A. From 0.59 to about 0.002
Pa = 0.9^5 = 0.59 and 0.9^60 = 0.0018. 0.90 to 0.54 uses p = 0.01 and n = 60 for the second value only.
Question 10 · hard
Non-proteolytic Clostridium botulinum has a minimum growth temperature of about 3 °C. A chilled vacuum-packed fish product is stored at 2 °C. Which statement best describes the safety position?
The product is safe because vacuum packing raises the redox potential above the organism's limit
The product is unsafe because non-proteolytic strains grow fastest at refrigeration temperatures
Safe only while 2 °C is held throughout; abuse makes shelf-life limits or extra hurdles necessary
The product is safe indefinitely because spores of non-proteolytic strains cannot survive storage at 2 °C or below
Answer and working
C. Safe only while 2 °C is held throughout; abuse makes shelf-life limits or extra hurdles necessary
Storage below 3 °C prevents growth, but chill chains are rarely perfect, so regulators combine temperature with shelf-life limits or hurdles such as salt or pH. Vacuum packing lowers, not raises, the redox potential.
A study plan for Food Microbiology: Spoilage, Pathogens & Detection in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (53% of the 17 questions): Predictive microbiology: primary and secondary models (3, 18%); Intrinsic and extrinsic factors controlling microbial growth (2, 12%); Microbiological criteria and sampling plans (2, 12%); Molecular methods: PCR, qPCR and whole-genome sequencing (2, 12%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Bacterial food-borne pathogens: Salmonella, Listeria, E. coli (STEC), Campylobacter, Shigella, Vibrio and Yersinia (1, 6%); Biofilms in food plants (1, 6%); Conventional methods: plate count, MPN, selective media and confirmation (1, 6%); Food-borne viruses and parasites (1, 6%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Mycotoxigenic moulds: Aspergillus, Penicillium and Fusarium (1, 6%); Rapid methods: ATP bioluminescence, immunoassays and lateral flow (1, 6%); Spoilage of canned, bakery and beverage products (1, 6%); Spore-formers and toxin producers: Clostridium botulinum, C. perfringens, Bacillus cereus and Staphylococcus aureus (1, 6%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Intrinsic and extrinsic factors controlling microbial growth (2 hard of 2), Microbiological criteria and sampling plans (2 hard of 2), Bacterial food-borne pathogens: Salmonella, Listeria, E. coli (STEC), Campylobacter, Shigella, Vibrio and Yersinia (1 hard of 1).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.