LAISHA
Open Laisha

Agricultural and Biosystems Engineers Licensure Examination (ABELE)

Philippines · Professional Regulatory Board of Agricultural and Biosystems Engineering, PRC

1532practice questions written to this syllabus
48subjects

What Agricultural and Biosystems Engineers Licensure Examination is

The Agricultural and Biosystems Engineers Licensure Examination is the Philippine board exam for agricultural and biosystems engineering. It is run by the Professional Regulation Commission (PRC) through the Professional Regulatory Board of Agricultural and Biosystems Engineering under Republic Act No. 10915 (2016). Everyone applying to register as an agricultural and biosystems engineer must pass it. Passers take an oath, receive a Certificate of Registration and professional ID, and may use the title 'Engr.'; nobody may practise the profession in the Philippines without this licence.

Who is eligible

How to register

  1. Check the PRC exam schedule for the next ABE exam date and its application period (for the 19-20 November 2026 exam, applications ran 21 August to 20 October 2026).
  2. Create or log in to your LERIS account at online.prc.gov.ph, fill in the application, upload documents if required, and choose a payment option.
  3. Prepare the documents: PSA birth certificate (and PSA marriage certificate for married women), diploma and transcript of records with a scanned photo and the remark 'For Board Examination Purpose only', a good moral character certificate, an NBI clearance valid for at least six months, and a documentary stamp.
  4. Submit the system-generated application form and documents at the PRC regional office application window for checking.
  5. Receive your Notice of Admission.
  6. Two to three working days before the exam, check your school or building assignment on the PRC website.
  7. Sit the exam. If you pass, take the oath and register to receive your Certificate of Registration and Professional Identification Card.

Format

Paper-based, over two days. December 2025 programme: Day 1 - Agricultural and Biosystems Structures, Environment Engineering, Bioprocess Engineering and Allied Subjects (36%), 8:00 a.m.-2:00 p.m.; Day 2 - Land and Water Resources Engineering and Allied Subjects (32%), 8:00 a.m.-1:00 p.m., and Agricultural and Biosystems Power, Energy and Machinery Engineering and Allied Subjects (32%), 2:00-6:00 p.m. One non-programmable calculator only (the Casio FX-991ES and FX-991ES Plus are banned by name). Pass: weighted general average of at least 70% with no subject below 55%; an examinee with 70% or more overall but under 55% in a subject retakes only that subject.

From the exam body's own pages, checked 2026-11-08.

Sections

Fees: PRC Citizen's Charter 2026 (1st edition): licensure exam application fee PHP 900 for baccalaureate-level exams, PHP 450 for a conditional/removal exam, plus a documentary stamp of PHP 50 face value. Registration and ID fees after passing are separate and not confirmed here.

How it has changed

Mandatory to practise under RA 10915 (2016), which renamed 'Agricultural Engineer' to 'Agricultural and Biosystems Engineer'. Scope includes aquaculture and forest engineering, laws and ethics, and PAES/PNS standards. Results: Dec 2024, 1,479 of 2,625 passed; Dec 2025, 1,475 of 2,494 passed. No verified topic-frequency data exists; Laisha's PRC questions are written to the syllabus only. Law: https://lawphil.net/statutes/repacts/ra2016/ra_10915_2016.html

How it differs from similar exams

Unlike older 'agricultural engineer' boards, RA 10915 widened the scope into biosystems: aquaculture, forest engineering, bio-environmental design and food and bio-based process engineering. Like other PRC engineering boards, it is paper-based, needs a 70% weighted average and sets a per-subject floor (55% here).

How to prepare for Agricultural and Biosystems Engineers Licensure Examination

Where our 1532 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (68% of the questions): Engineering Drawing, Graphics & CAD (131); Crop Production & Protection for Engineers (122); Aquacultural & Forest Engineering (regional) (116); Workshop Technology & Manufacturing (74); Agricultural Waste Management & Environmental Engineering (67); Building Materials, Theory of Structures & Construction (60); Engineering Economics, Project & Business Management (53); Professional Practice, Ethics & Laws (53); Bio-energy Systems: Design & Applications (52); Soil Science for Engineers (51); Renewable Energy Sources (Solar, Wind) (48); Sprinkler & Micro-Irrigation Systems (45); and 4 more.

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Agricultural Structures & Environmental Control (38); Strength of Materials (34); Protected Cultivation & Greenhouse Engineering (33); Farm Machinery Management & Economics (26); Theory of Machines (25); Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) (23); Engineering Thermodynamics (22); Heat & Mass Transfer (21); Farm Machinery & Equipment II — Plant Protection, Harvesting, Threshing (21); Engineering Properties of Agricultural Produce (19); Post-Harvest Engineering of Horticultural Crops (18); Tractor Systems & Controls (17); and 4 more.

    One pass per subject, then mixed sets across them.

  3. Lighter: Farm Machinery Testing, Evaluation & Standards (13); Watershed Hydrology (13); Engineering Mathematics (12); Soil & Water Conservation Engineering (12); Watershed Planning & Management (12); Agricultural Drainage Engineering (11); Water Resources Management, Floods & Canal Systems (11); Mechanics of Tillage & Traction (Soil Dynamics) (10); Human Engineering, Ergonomics & Safety (9); Hydraulic Drives & Controls (8); Groundwater, Wells & Pumps (8); Storage Engineering, Material Handling & Packaging (8); and 4 more.

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Engineering Mathematics (8 hard of 12), Electrical Machines & Power Utilisation (20 hard of 41), Agricultural Structures & Environmental Control (16 hard of 38).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official sources: PRC 2026 schedule of examinations · PRC list of requirements · PRC online application (LERIS) · Programme of the December 2025 ABE exam · IRR of RA 10915 (Board Resolution No. 01, s. 2022). Checked 2026-11-08.

Not confirmed from an official source, so not stated here: The text of RA 10915 itself could not be fetched: the Official Gazette and the Senate PDF both returned HTTP 403. Statements here rely on the PRC-hosted IRR.; The December 2024 and December 2025 pass figures in the entry were not re-checked against PRC result releases in this task.; The programme for the November 2026 exam was not found, so the 2025 times and weights may change.; The Board's current Table of Specifications was not found online.; The 2022 IRR's eight per-subject weights are hard to read in the PDF extract, so exact figures are not quoted..

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. Anaerobic lagoons are built relatively deep compared with facultative ponds mainly because depth:

  1. Removes the need for any liner in permeable soils
  2. Allows wind action to mix oxygen into the bottom sludge layer
  3. Increases surface area, which raises algal oxygen production
  4. Reduces surface area, lowering odour release and heat loss
Answer and working

D. Reduces surface area, lowering odour release and heat loss

For a given volume, a deeper lagoon has less surface, so less odour escapes and less heat is lost, which helps the anaerobic bacteria. Algal oxygen and wind mixing are features of facultative ponds; liner rules depend on soil and local standards, not depth.

Agricultural Waste Management & Environmental Engineering · Anaerobic lagoons

2. 2 kg of air is heated at constant pressure from 20 °C to 80 °C (cp = 1.005, cv = 0.718 kJ/kg·K). The heat supplied is

  1. 86.2 kJ
  2. 34.4 kJ
  3. 120.6 kJ
  4. 160.8 kJ
Answer and working

C. 120.6 kJ

At constant pressure Q = m cp ΔT = 2 × 1.005 × 60 = 120.6 kJ. 86.2 kJ uses cv (that is ΔU only), 34.4 kJ is only the boundary work m R ΔT, and 160.8 kJ uses the final temperature instead of the rise.

Engineering Thermodynamics · First law of thermodynamics

3. On a mounted plough, the fore-and-aft level (so front and rear bottoms cut the same depth) is set with the

  1. levelling lift rod
  2. top link
  3. check chain
  4. PTO shaft
Answer and working

B. top link

Lengthening or shortening the top link pitches the plough; the lift rod levels it sideways; check chains control sway.

Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser · Furrow geometry

4. A cold store's calculated 24-hour load is 2,000 MJ. With a 10% safety factor and the plant planned to run 20 h a day, the refrigeration capacity to specify is about

  1. 1833 kW (521 TR)
  2. 27.8 kW (7.90 TR)
  3. 30.6 kW (8.69 TR)
  4. 25.5 kW (7.24 TR)
Answer and working

C. 30.6 kW (8.69 TR)

Capacity = 2,000,000 kJ × 1.10/(20 × 3,600 s) = 30.6 kW = 8.69 TR. Dividing by 24 h (25.5 kW) leaves no time for defrost or reserve; omitting the safety factor gives 27.8 kW. 1833 kW divides by minutes instead of seconds (2,200,000/1,200).

Refrigeration, Air-Conditioning & Cold-Chain Engineering · Cold-store heat load: transmission, product and respiration

5. A pump still works reliably, but a new model uses 30 % less energy for the same duty. The loss in value of the old pump for this reason is called:

  1. Physical depreciation from wear and tear
  2. Sunk cost of the original purchase price
  3. Obsolescence, or functional depreciation
  4. Salvage value at the end of its life
Answer and working

C. Obsolescence, or functional depreciation

Obsolescence is the loss of value caused by better technology or changed requirements, not by wear. Physical depreciation comes from use, corrosion and accidents. It is one of the main reasons assets are replaced before they wear out.

Engineering Economics, Project & Business Management · Replacement analysis

6. A 300 W crystalline silicon module has a power temperature coefficient of −0.4%/°C. Estimate its output at 1000 W/m² when the cell temperature is 55 °C.

  1. 234 W
  2. 336 W
  3. 36 W
  4. 264 W
Answer and working

D. 264 W

Rise above STC = 55 − 25 = 30 °C; loss = 30 × 0.4% = 12%; P = 300 × 0.88 = 264 W. Using 55 °C instead of the rise gives 234 W; adding the loss gives 336 W; 36 W is the loss, not the output.

Farm Power Sources · Solar power as a farm power source

7. A water-pumping windmill 'furls' in high winds. What does furling do?

  1. Feathers the pump valves (usually via the pump rod) so water flows back to the well
  2. Locks the rotor facing directly into the wind so it can extract maximum power during a strong gust
  3. Switches the pump from single-acting to double-acting
  4. Turns the rotor partly out of the wind (usually through the tail vane) to limit speed and loads
Answer and working

D. Turns the rotor partly out of the wind (usually through the tail vane) to limit speed and loads

Above the design speed a windmill's rotor could overspeed and overload the pump rod. Furling swings the rotor edgewise to the wind, reducing its effective area. It does not change the pump's action.

Renewable Energy Sources (Solar, Wind) · Wind turbines and water-pumping windmills

8. In the regeneration section of an HTST pasteuriser the pasteurised milk is kept at a higher pressure than the raw milk so that

  1. The raw milk boils less
  2. Any leak flows from pasteurised to raw milk, never the reverse
  3. Heat transfer coefficients are higher on the pressurised plate side
  4. The timing pump needs less power
Answer and working

B. Any leak flows from pasteurised to raw milk, never the reverse

A pinhole in a plate would otherwise let raw milk contaminate pasteurised milk. The pressure differential protects the product; it has no useful effect on U or pump power.

Food & Dairy Engineering · Pasteurisation: HTST and LTLT

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 1,532 questions — Agricultural and Biosystems Engineers Licensure Examination (ABELE)

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.