LAISHA
Open Laisha

Agricultural and Biosystems Engineers Licensure Examination Professional Practice, Ethics & Laws: practice questions

Agricultural and Biosystems Engineers Licensure Examination (ABELE) · Philippines · Professional Regulatory Board of Agricultural and Biosystems Engineering, PRC

Original practice questions written to the published syllabus · not past papers
10worked here, free
53written to this exam in this subject
7syllabus units

About Agricultural and Biosystems Engineers Licensure Examination

Agricultural and Biosystems Engineers Licensure Examination (ABELE) is a licensing and registration exam run by Professional Regulatory Board of Agricultural and Biosystems Engineering, PRC, for candidates in Philippines. Paper-based, 2 days (Day 1 6 hours; Day 2 5 hours + 4 hours). Non-programmable calculator only; the Dec 2025 programme bans the Casio fx-991ES/ES Plus by name.

Source: prc.gov.ph.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Professional Practice, Ethics & Laws in Agricultural and Biosystems Engineers Licensure Examination

RA 10915 provisions (scope of practice, Board powers, registration, sealing, pass rule), RA 10601 and machinery standards and testing, PAES/PNS-BAFS standards, professional ethics, contracts and specifications in the allied-subjects papers.

How the profession is regulated and what an engineer owes the public, the client and colleagues.

Our 53 Agricultural and Biosystems Engineers Licensure Examination questions in this subject: 12 easy, 24 medium, 17 hard, across 7 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Agricultural and Biosystems Engineers Licensure Examination and are not shown on any other exam's page.

Question 1 · hard

A client asks an engineer to word a report on a small earthen dam so that a marginal spillway capacity appears adequate, to speed approval. What should the engineer do?

  1. Report the findings and their uncertainty accurately, and explain the risk clearly
  2. Reword the report as asked, because the client owns the report and decides its content
  3. Reword it, but keep a private note of the true findings in case of later inquiry
  4. Leave out the spillway section, since a report need not cover every design element
Answer and working

A. Report the findings and their uncertainty accurately, and explain the risk clearly

Codes require public statements and reports to be objective and truthful. An engineer may present a client's case but must not misrepresent facts, especially where public safety is involved. Omitting a known safety issue is also misrepresentation.

Question 2 · easy

Which Philippine law sets the continuing professional development requirement for registered professionals, including agricultural and biosystems engineers?

  1. Republic Act No. 10601, the Agricultural and Fisheries Mechanization Law
  2. Republic Act No. 3927, the original agricultural engineering law
  3. Republic Act No. 10915 alone, without any other statute
  4. Republic Act No. 10912, the Continuing Professional Development Act
Answer and working

D. Republic Act No. 10912, the Continuing Professional Development Act

RA 10912 sets CPD requirements for professionals regulated by the PRC. RA 10601 concerns mechanisation and machinery standards; RA 3927 was replaced by RA 10915.

Question 3 · medium

Under RA 10915, which of the following falls within the scope of agricultural and biosystems engineering?

  1. Human medical devices and hospital engineering, in addition to farm machinery
  2. Only tractors and implements, with irrigation left to civil engineers
  3. Aquaculture and forest engineering, besides machinery, water and structures
  4. Only food processing, with land and water left to geodetic engineers
Answer and working

C. Aquaculture and forest engineering, besides machinery, water and structures

The Act defines a broad scope: agricultural power, energy and machinery; land and water resources including aquaculture engineering; structures and environment including forest engineering; and bioprocess engineering. It does not cover medical devices.

Question 4 · hard

Why is a cost-plus-percentage-fee contract generally avoided in public works?

  1. The contractor bears all cost risk, so bids include very large contingencies
  2. The fee grows with cost, so the contractor gains by spending more, not less
  3. It cannot be used when the scope of the work is not fully known at the start
  4. It requires a complete design before tendering, which delays urgent work
Answer and working

B. The fee grows with cost, so the contractor gains by spending more, not less

Under cost-plus-percentage the owner reimburses costs and pays a fee proportional to them, so the contractor gains from higher costs. It suits urgent, undefined work but needs tight control; a fixed fee or target cost reduces the perverse incentive.

Question 5 · hard

A specification for a grain-store floor prescribes the concrete mix, the reinforcement and the curing method exactly. The contractor follows it, and the floor cracks because the design was inadequate. Who is primarily responsible?

  1. The designer, as a prescriptive specification leaves design risk with its author
  2. The contractor, because a contractor always guarantees the fitness of completed work
  3. The cement supplier, because cracking shows that the cement was defective
  4. No one, because following a specification removes all liability for the result
Answer and working

A. The designer, as a prescriptive specification leaves design risk with its author

Under a prescriptive specification the owner's designer chooses the method and takes responsibility for its adequacy; a contractor who follows it correctly is not normally liable for a design shortfall. A performance specification would shift that responsibility to the contractor.

Question 6 · easy

Who are the members of the International Organization for Standardization (ISO)?

  1. Individual engineers who pay an annual subscription and vote on standards
  2. Multinational manufacturers that fund the development of each standard
  3. National standards bodies, one per country, such as BIS for India and ANSI for the USA
  4. Government ministries of trade from every member state of the United Nations
Answer and working

C. National standards bodies, one per country, such as BIS for India and ANSI for the USA

ISO's members are national standards bodies. Technical work is done in technical committees with experts nominated by members. Firms and individuals participate through their national bodies.

Question 7 · medium

How does BIS certification of a product become compulsory in India?

  1. Automatically, for every product that has an Indian Standard published
  2. Only when the manufacturer chooses to apply for the Standard Mark
  3. When the government notifies it, as by a quality control order
  4. Only when the product is exported to a country that requires it
Answer and working

C. When the government notifies it, as by a quality control order

BIS certification is voluntary for most products. It becomes compulsory for products notified by the government, commonly through quality control orders. Having an Indian Standard alone does not make it mandatory.

Question 8 · medium

Which Philippine law of 2013 provides the framework for standards, testing and evaluation of agricultural and fisheries machinery?

  1. Republic Act No. 10601, the Agricultural and Fisheries Mechanization Law
  2. Republic Act No. 10915, the Agricultural and Biosystems Engineering Act
  3. Republic Act No. 10912, the Continuing Professional Development Act
  4. Republic Act No. 3927, the original agricultural engineering law
Answer and working

A. Republic Act No. 10601, the Agricultural and Fisheries Mechanization Law

RA 10601 (AFMech Law, 2013) establishes the national mechanisation framework, including machinery standards, testing and evaluation and registration. RA 10915 regulates the profession; RA 10912 sets CPD.

Question 9 · medium

In a standard, what is the status of an annex marked 'informative'?

  1. It gives guidance only and is not part of the requirements
  2. It contains requirements that must be met to claim conformity
  3. It replaces the main text when the two disagree
  4. It applies only to products sold outside the issuing country
Answer and working

A. It gives guidance only and is not part of the requirements

Normative annexes form part of the requirements; informative annexes provide guidance, examples or background. Conformity is judged against the normative content.

Question 10 · medium

Which citation of a standard is complete and unambiguous?

  1. ISO agricultural machinery safety standard, general requirements part
  2. ISO 4254, the latest safety standard for agricultural machinery
  3. ISO 4254-1, recommended by the tractor manufacturer's catalogue
  4. ISO 4254-1:2013, Agricultural machinery — Safety — Part 1: General requirements
Answer and working

D. ISO 4254-1:2013, Agricultural machinery — Safety — Part 1: General requirements

A complete citation gives the body, number, part, edition and title. Leaving out the part or the edition makes a citation ambiguous. Naming a source catalogue adds nothing to identifying the document.

A study plan for Professional Practice, Ethics & Laws in Agricultural and Biosystems Engineers Licensure Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (66% of the 53 questions): Contracts and specifications (18, 34%); Licensure law: RA 10915 (Philippines) and NCEES model law (USA) (9, 17%); Codes of ethics for engineers (8, 15%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Standards bodies: BIS, ASABE, ISO, PAES/PNS (8, 15%); Using and citing standards in design (7, 13%); Safety and liability (2, 4%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Intellectual property (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Intellectual property (1 hard of 1), Safety and liability (1 hard of 2), Licensure law: RA 10915 (Philippines) and NCEES model law (USA) (4 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Safety and liability (1 easy of 2); Licensure law: RA 10915 (Philippines) and NCEES model law (USA) (3 easy of 9).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Agricultural and Biosystems Engineers Licensure Examination Professional Practice, Ethics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.