LAISHA
Open Laisha

Agricultural and Biosystems Engineers Licensure Examination Engineering Thermodynamics: practice questions

Agricultural and Biosystems Engineers Licensure Examination (ABELE) · Philippines · Professional Regulatory Board of Agricultural and Biosystems Engineering, PRC

Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
8syllabus units

About Agricultural and Biosystems Engineers Licensure Examination

Agricultural and Biosystems Engineers Licensure Examination (ABELE) is a licensing and registration exam run by Professional Regulatory Board of Agricultural and Biosystems Engineering, PRC, for candidates in Philippines. Paper-based, 2 days (Day 1 6 hours; Day 2 5 hours + 4 hours). Non-programmable calculator only; the Dec 2025 programme bans the Casio fx-991ES/ES Plus by name.

Source: prc.gov.ph.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Engineering Thermodynamics in Agricultural and Biosystems Engineers Licensure Examination

Energy, work, heat and the cycles behind engines, refrigerators and dryers.

Our 22 Agricultural and Biosystems Engineers Licensure Examination questions in this subject: 0 easy, 15 medium, 7 hard, across 8 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Agricultural and Biosystems Engineers Licensure Examination and are not shown on any other exam's page.

Question 1 · medium

2 kg of air is heated at constant pressure from 20 °C to 80 °C (cp = 1.005, cv = 0.718 kJ/kg·K). The heat supplied is

  1. 86.2 kJ
  2. 34.4 kJ
  3. 120.6 kJ
  4. 160.8 kJ
Answer and working

C. 120.6 kJ

At constant pressure Q = m cp ΔT = 2 × 1.005 × 60 = 120.6 kJ. 86.2 kJ uses cv (that is ΔU only), 34.4 kJ is only the boundary work m R ΔT, and 160.8 kJ uses the final temperature instead of the rise.

Question 2 · hard

Under which conditions does a real gas behave most nearly as an ideal gas?

  1. High pressure and low temperature, close to the saturated-vapour line
  2. Pressure close to the critical pressure at any temperature, where Z = 1 exactly
  3. Any condition, provided the gas is monatomic and is not a mixture
  4. Low pressure and high temperature relative to its critical point, where Z ≈ 1
Answer and working

D. Low pressure and high temperature relative to its critical point, where Z ≈ 1

Ideal behaviour (compressibility factor Z = Pv/RT ≈ 1) is approached at low reduced pressure and high reduced temperature. Near saturation or the critical point deviations are largest, and monatomic gases also deviate at high pressure.

Question 3 · medium

A pasteuriser heats 1000 kg/h of milk from 4 °C to 72 °C. Taking the specific heat of the milk as 3.9 kJ/kg·K, the heating rate needed is

  1. 79.0 kW
  2. 4420 kW
  3. 73.7 kW
  4. 78.0 kW
Answer and working

C. 73.7 kW

Q̇ = ṁ c ΔT = (1000/3600) × 3.9 × 68 = 73.7 kW. 79.0 kW uses water's 4.18 instead of the stated 3.9, 4420 kW converts per hour as though it were per minute, and 78.0 kW uses the outlet temperature instead of the rise.

Question 4 · hard

A steam turbine takes 2 kg/s of steam with h = 3230 kJ/kg at 50 m/s and discharges it with h = 2400 kJ/kg at 150 m/s, losing 20 kW of heat. Neglecting height change, the power output is

  1. 1640 kW
  2. 1660 kW
  3. -18360 kW
  4. 1620 kW
Answer and working

D. 1620 kW

W = ṁ[(h1 − h2) + (V1² − V2²)/2000] − Q_loss = 2 × [830 + (2500 − 22 500)/2000] − 20 = 2 × (830 − 10) − 20 = 1620 kW. 1640 kW ignores the kinetic-energy change, 1660 kW adds it with the wrong sign, and −18 360 kW forgets to divide the velocity term (J/kg) by 1000.

Question 5 · medium

In an insulated blancher feed tank, 2 kg/s of water at 80 °C mixes steadily with 3 kg/s of water at 20 °C. The outlet temperature is

  1. 50 °C
  2. 56 °C
  3. 110 °C
  4. 44 °C
Answer and working

D. 44 °C

Energy balance with constant c: T = (2 × 80 + 3 × 20)/5 = 44 °C. 50 °C is the simple average that ignores flow rates, 56 °C swaps the flow rates, and 110 °C divides by one stream's flow instead of the total.

Question 6 · medium

A parboiling boiler makes 500 kg/h of dry saturated steam at 200 kPa (hg = 2706.2 kJ/kg) from feedwater at 30 °C (h = 125.7 kJ/kg). The heat that must be transferred to the water is about

  1. 376 kW
  2. 306 kW
  3. 21504 kW
  4. 358 kW
Answer and working

D. 358 kW

Q̇ = ṁ(hg − h_fw) = (500/3600) × (2706.2 − 125.7) = 358 kW. 376 kW ignores the feedwater enthalpy, 306 kW counts only the latent heat (the water must also be heated from 30 °C to 120 °C), and 21504 kW divides by 60 instead of 3600.

Question 7 · hard

In an ideal Rankine cycle, steam enters the turbine at 3 MPa and 400 °C (h = 3231.6 kJ/kg) and leaves at 10 kPa with h = 2193.0 kJ/kg. Saturated liquid at 10 kPa has h = 191.8 kJ/kg and v = 0.00101 m³/kg. The cycle efficiency is about

  1. 32.0 %
  2. 52.6 %
  3. -65.2 %
  4. 34.1 %
Answer and working

D. 34.1 %

Pump work = vΔP = 0.00101 × (3000 − 10) = 3.02 kJ/kg; h after pump = 194.8; q_in = 3036.7; turbine work = 1038.6; η = (1038.6 − 3.02)/3036.7 = 34.1 %. 32.0 % divides by h1 instead of the heat added, 52.6 % is the Carnot limit between the extreme temperatures, and the negative value comes from multiplying the pump work by 1000.

Question 8 · medium

An engine cycle produces 1.2 kJ of net work per cycle and has a swept volume of 1.5 litres. Its mean effective pressure is

  1. 1.8 kPa
  2. 800 kPa
  3. 0.8 kPa
  4. 1250 kPa
Answer and working

B. 800 kPa

MEP = W_net/V_swept = 1.2 kJ/0.0015 m³ = 800 kPa. 1.8 kPa multiplies instead of dividing, 0.8 kPa forgets to convert litres to m³, and 1250 kPa inverts the ratio.

Question 9 · hard

A grain dryer heats 1.5 kg/s of dry air (humidity ratio 0.012 kg/kg) from 30 °C to 60 °C. Taking cp of dry air 1.005 and of vapour 1.88 kJ/kg·K, the heater duty is about

  1. 45.2 kW
  2. 92.5 kW
  3. 91.3 kW
  4. 46.2 kW
Answer and working

D. 46.2 kW

Sensible heating at constant W: Q = ṁa (1.005 + 1.88W)ΔT = 1.5 × 1.0276 × 30 = 46.2 kW. 45.2 kW ignores the vapour, 92.5 kW uses the final temperature instead of the rise, and 91.3 kW wrongly adds latent heat (1.5 × 0.012 × 2501 = 45.0 kW), although no water evaporates in a heater.

Question 10 · hard

Air (1.5 kg/s of dry air) enters a dryer's grain bed with a humidity ratio of 0.012 kg/kg and leaves with 0.020 kg/kg. The water removed from the grain is about

  1. 108.0 kg/h
  2. 43.2 kg/h
  3. 0.72 kg/h
  4. 172.8 kg/h
Answer and working

B. 43.2 kg/h

Water removed = ṁa (W2 − W1) = 1.5 × 0.008 = 0.012 kg/s = 43.2 kg/h. 108 kg/h counts all the exit moisture including what the air brought in, 0.72 kg/h converts per minute instead of per hour, and 172.8 kg/h adds the humidity ratios.

A study plan for Engineering Thermodynamics in Agricultural and Biosystems Engineers Licensure Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (59% of the 22 questions): Steady-flow energy equation (5, 23%); Introduction to psychrometry (4, 18%); Properties of steam, steam tables and the Mollier chart (4, 18%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Air-standard cycles: Otto, Diesel, dual and Brayton (2, 9%); First law of thermodynamics (2, 9%); Ideal gas processes (2, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Vapour-compression cycle basics (2, 9%); Systems, properties and the zeroth law (1, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Introduction to psychrometry (3 hard of 4), Ideal gas processes (1 hard of 2), Vapour-compression cycle basics (1 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Agricultural and Biosystems Engineers Licensure Examination Engineering Thermodynamics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.