NCEES PE Agricultural and Biological Engineering · USA · NCEES (ASABE is the content partner)
Original practice questions written to the published syllabus · not past papersNCEES PE Agricultural and Biological Engineering is a licensing and registration exam run by NCEES (ASABE is the content partner), for candidates in USA. Computer-based, 85 questions, 9.5-hour appointment (8.5 hours of exam). Once a year (next: 28 Oct 2026). Closed book with the electronic NCEES handbook and supplied searchable ASABE standards; SI and US customary units.
Source: ncees.org.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Statistics is listed among the common system applications. It appears as applied analysis: a confidence interval on test data, a regression of machine or process performance, frequency analysis for a hydrological design (with the national guideline method), and quality or uniformity measures in processing and irrigation.
Describing data, probability distributions, regression and designed experiments, with the frequency analysis that hydrology and quality control rely on.
Our 29 NCEES PE Agricultural and Biological Engineering questions in this subject: 0 easy, 18 medium, 11 hard, across 9 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to NCEES PE Agricultural and Biological Engineering and are not shown on any other exam's page.
Two grain lots are blended: 10 t at 14 per cent moisture (wet basis) and 30 t at 18 per cent moisture (wet basis). What is the moisture content of the 40 t blend, wet basis?
C. 17.0 per cent
Wet-basis moisture is water mass per unit wet mass, so weight by wet mass: water = 0.14 × 10 + 0.18 × 30 = 1.4 + 5.4 = 6.8 t; 6.8/40 = 17.0 per cent. The simple average (14 + 18)/2 = 16 per cent ignores the lot sizes; 15 per cent weights the wrong way round (0.14 × 30 + 0.18 × 10 = 6.0 t, /40). 20.5 per cent is the blend's dry-basis moisture, 6.8/(40 − 6.8) = 6.8/33.2.
A combine harvester averages 0.5 breakdowns per 100 hours of operation, and breakdowns follow a Poisson process. What is the probability of no breakdown in a 300-hour season?
C. 0.2231
Scale the rate to the interval: λ = 0.5 × 3 = 1.5. P(0) = e^(−1.5) = 0.2231. 0.6065 forgets to scale λ; 0.3347 is P(exactly one); 0.7769 is P(at least one).
Bags of fertiliser from a filler have normally distributed net mass with standard deviation 0.5 kg. The mean is set at 25.0 kg. Below what mass do the lightest 5 per cent of bags fall? (One-tailed 5 per cent point of Z = 1.645.)
D. 24.18 kg
x = μ − 1.645σ = 25.0 − 1.645 × 0.5 = 24.18 kg. Using 1.96 (the two-tailed 5 per cent point) gives 24.02 kg, which cuts off only 2.5 per cent; 25.82 kg is the upper 5 per cent point; 24.59 kg uses the variance (0.25) as if it were σ.
A calibration regression of a soil moisture sensor on 14 samples has total sum of squares 48.0 and regression sum of squares 40.0 (in squared percentage points). What is the standard error of estimate?
C. 0.816 percentage points
SSE = SST − SSR = 48.0 − 40.0 = 8.0. se = √(SSE/(n − 2)) = √(8.0/12) = 0.816. Dividing by n = 14 gives 0.756; 0.667 is the mean square error without the square root; 1.826 uses the regression SS.
A survey is planned to estimate the proportion of farms using drip irrigation to within ±5 percentage points at 95 per cent confidence (z = 1.96). Nothing is known in advance about the proportion. What sample size is needed?
B. 385
With no prior estimate use p = 0.5, which maximises p(1 − p): n = z²p(1 − p)/E² = 1.96² × 0.25/0.05² = 384.16, rounded up to 385. 271 uses 90 per cent confidence; 100 is 1/E² × 0.25; 20 forgets to square.
An engineer checks plant stand by counting every 10th plant along crop rows, starting from a random plant. The planter has a 10-cell plate and one cell is damaged, so every 10th seed is missed. What is the main risk of this sampling plan?
B. The sampling interval matches the periodic fault, so the sample may always miss or always hit damaged positions
Systematic sampling is efficient but is biased when the population has a period equal to (or a multiple of) the sampling interval. Here the fault repeats every 10 seeds, the same as the interval, so every sampled position has the same relation to the damaged cell. A random or stratified-random plan, or an interval that is not a multiple of 10, avoids this.
Two moisture meters are compared for precision. Meter A gives a sample variance of 0.64 from 11 readings; meter B gives 0.25 from 9 readings of the same sample. Testing equal variances at 5 per cent with the larger variance on top (upper 5 per cent F for 10 and 8 df = 3.35), what is the result?
A. F = 2.56; the variances are not significantly different
F = s1²/s2² = 0.64/0.25 = 2.56 with (11 − 1, 9 − 1) = (10, 8) df. Since 2.56 < 3.35 (tabled 3.35), equality of variances is not rejected. 1.60 is the ratio of SDs, not variances; 0.39 puts the smaller variance on top.
A trial reports that a new tine design reduced draft with p = 0.03. Which interpretation is correct?
D. If the tine had no effect, a difference at least this large would arise by chance 3 per cent of the time
The p-value is computed assuming H0 is true; it is the probability of data this extreme or more under H0. It is not the probability that H0 is true, it says nothing directly about the size of the effect, and it is not a replication probability. Report the effect with its confidence interval as well.
Annual rainfall at a station is approximately normal with mean 850 mm and standard deviation 170 mm. What annual rainfall is equalled or exceeded in 90 per cent of years? (z for 10 per cent in one tail = 1.282.)
C. 632.1 mm
Rainfall exceeded in 90 per cent of years is the 10th percentile: x = μ − 1.282σ = 850 − 1.282 × 170 = 632.1 mm. 1067.9 mm is exceeded in only 10 per cent of years; 570.4 mm is the 95 per cent dependable value; 765 mm is simply 90 per cent of the mean.
The logarithms (base 10) of annual peak flows (m³/s) at a small catchment have mean 2.10 and standard deviation 0.15. Assuming a log-normal distribution, what is the 100-year peak flow? (z for 1 per cent in the upper tail = 2.326.)
D. 281 m³/s
Work in logs: yT = ȳ + z·sy = 2.10 + 2.326 × 0.15 = 2.4489; Q100 = 10^2.4489 = 281 m³/s. Adding z times the antilog of the SD to the antilog of the mean gives 129; 2.449 forgets the antilog; 170 applies a normal-style increase to the antilogged mean (10^2.10 × (1 + 2.326 × 0.15)).
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.