GATE — Agricultural Engineering (AG) · India · IITs and IISc on rotation (2027: IIT Madras)
Original practice questions written to the published syllabus · not past papersGATE — Agricultural Engineering (AG) is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks (15 General Aptitude + 85 technical: 25 one-mark and 30 two-mark questions). MCQ, MSQ and NAT; negative marking on MCQ only (−1/3 for one-mark, −2/3 for two-mark); no partial credit on MSQ. On-screen virtual calculator.
Source: gate2027.iitm.ac.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Probability and statistics sit inside the Engineering Mathematics section and appeared in every paper Laisha counted from 2019 to 2026, usually as one or two short computational items, often numerical-answer type: a conditional or Bayes probability, a binomial or Poisson probability, a normal-table calculation, the mean or variance of a random variable from its density, a correlation coefficient or regression slope from a small table. Hydrology questions in the soil and water sections reuse return period, risk and Gumbel frequency factors; processing and machinery questions reuse CV and uniformity.
Describing data, probability distributions, regression and designed experiments, with the frequency analysis that hydrology and quality control rely on.
Our 62 GATE questions in this subject: 18 easy, 27 medium, 17 hard, across 10 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to GATE and are not shown on any other exam's page.
Eight nozzles on a sprayer boom deliver 0.98, 1.02, 1.05, 0.95, 1.00, 1.04, 0.97 and 0.99 L/min. What is the coefficient of variation of the discharge (using the sample standard deviation)?
D. 3.46 per cent
Mean = 1.0000 L/min; sample SD = 0.03464 L/min; CV = s/x̄ × 100 = 3.46 per cent. Using the population SD (divide by n) gives 3.24 per cent; using the variance instead of the SD gives 0.120; forgetting to multiply by 100 but still writing 'per cent' gives 0.0346.
Filled bags of wheat have weights that are normally distributed with mean 50.2 kg and standard deviation 0.4 kg. What proportion of bags weigh less than 49.5 kg? (Take Φ(1.75) = 0.9599.)
B. 0.0401
z = (49.5 − 50.2)/0.4 = -1.75. P(Z < −1.75) = 1 − Φ(1.75) = 1 − 0.9599 = 0.0401. 0.9599 is the proportion above 49.5 kg; 0.0802 doubles the tail (a two-tailed slip); 0.4599 is the area between the mean and z.
The regression coefficient of y on x is 0.8 and that of x on y is 0.45. What is the correlation coefficient between x and y?
D. 0.60
r² = byx × bxy = 0.8 × 0.45 = 0.36, so r = √0.36 = 0.60, with the common positive sign of the two coefficients. 0.36 is r²; 0.625 is the average of the coefficients; 1.25 = 1/0.8 and is impossible for a correlation.
Two judges rank 8 samples of dried mango slices for colour. The differences between the two ranks for the samples are 1, −1, 2, 0, −2, 1, −1 and 0. What is Spearman's rank correlation coefficient?
A. 0.8571
Σd² = 1 + 1 + 4 + 0 + 4 + 1 + 1 + 0 = 12. rs = 1 − 6Σd²/(n(n² − 1)) = 1 − 6 × 12/(8 × 63) = 1 − 72/504 = 0.8571. Using n² + 1 gives 0.8615; omitting the 6 gives 0.9762; 0.1429 forgets to subtract from 1.
A completely randomised design has 5 treatments, each replicated 4 times. How many degrees of freedom does the error term have?
A. 15
Total df = 20 − 1 = 19; treatment df = 5 − 1 = 4; error df = 19 − 4 = 15 = t(r − 1) = 5 × 3. 16 is t × (r − 1) + 1; 19 is the total; 12 is the RBD error df (t − 1)(r − 1).
In a field experiment, grouping plots of similar fertility into blocks and randomising treatments within each block puts into practice which of Fisher's principles?
A. Local control
Blocking to remove a known source of variation from the error is local control. Replication means repeating each treatment; randomisation ensures unbiased allocation; confounding is a deliberate technique in factorial designs and not one of the three basic principles.
Which experiment is best suited to a completely randomised design?
D. A laboratory comparison of four drying temperatures on sub-samples from one well-mixed grain lot
CRD is efficient only when experimental units are homogeneous, as with sub-samples of one mixed lot in the laboratory. The other three all have a known source of variation (slope, day and crew, soil type) that should be controlled by blocking in an RBD.
In an RBD with 5 treatments and 4 blocks, one plot is missing. Excluding it, the total of its block is 58.0, the total of its treatment is 44.0 and the grand total is 290.0. Using the standard missing-plot formula, what is the estimated value?
B. 13.500
y = (rB + tT − G)/((r − 1)(t − 1)) = (4 × 58 + 5 × 44 − 290)/(3 × 4) = (232 + 220 − 290)/12 = 162/12 = 13.500. Swapping r and t in the numerator gives 14.667; dividing by rt gives 8.100; 36.500 is the average of the block and treatment totals minus the grand mean, which has no basis. After inserting the estimate, the error df is reduced by one.
In the log-Pearson type III method of flood-frequency analysis, if the skew coefficient of the logarithms of the annual peaks is zero, the method reduces to
B. the log-normal method
Log-Pearson III applies the frequency factor to the logarithms; its K depends on the skew of the logs and equals the standard normal deviate when that skew is zero, which is exactly the log-normal method. Gumbel has a fixed skew of about 1.14 in the original data.
What does bootstrap resampling do?
B. It repeatedly draws samples of the same size, with replacement, from the observed data to estimate the sampling variability of a statistic without assuming its distribution
Bootstrap resamples the data already collected, with replacement, many times; the spread of the statistic across resamples estimates its standard error and gives confidence intervals. It does not clean data, fit a normal curve or require new fieldwork.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.