India · IITs and IISc on rotation (2027: IIT Madras)
2188practice questions written to this syllabus
40subjects
What GATE is
GATE (Graduate Aptitude Test in Engineering) is a national-level test conducted by IISc and the IITs on behalf of the National Coordination Board, Ministry of Education, India; IIT Madras organises GATE 2027. Agricultural Engineering (AG) is one of its 30 papers. A valid GATE score is used for Master's and direct Doctoral admission, with possible financial assistance, at Ministry of Education-supported institutions, and some public sector undertakings use scores for recruitment. Qualifying does not guarantee admission, a scholarship or a job.
Who is eligible
Candidates in the 3rd or a higher year of any undergraduate programme may appear.
Candidates who have completed a government-approved degree in Engineering, Technology, Architecture, Science, Commerce, Arts or Humanities may appear.
Candidates studying or who studied outside India must be in the 3rd or higher year of their undergraduate programme, or have completed a Bachelor's degree of at least three years in one of those fields.
Candidates pursuing or holding a higher degree may also appear.
Certifications from professional societies (for example IE(I) AMIE) count only if MoE, AICTE, UGC or UPSC has approved them as equivalent to B.E./B.Tech./B.Arch./B.Planning.
How to register
Check eligibility, the paper syllabus and the allowed two-paper combinations on the GATE 2027 website.
Register and apply online through the GOAPS portal (goaps.iitm.ac.in) during the registration window; a late fee applies in the extended period and the special window.
Upload the required documents, photograph and signature, and pay the application fee; keep the DigiLocker account used for the application, since later communications go only to it.
Zonal institutes scrutinise applications; if a defect is found you are emailed and must fix it in the rectification window (no fee).
Download the admit card when released (date TBA as of the check), and sit the computer-based test on the scheduled date (GATE 2027 exams: 6-7, 13-14 and 20-21 February 2027).
Results are scheduled for 19 March 2027; the GATE score is valid for 3 years.
Format
AG paper: 15 marks General Aptitude + 85 marks subject (including 13 marks of Engineering Mathematics), 180 minutes. GATE 2027 is computer-based, in English, 3 hours, 65 questions (10 General Aptitude + 55 subject), 100 marks; questions carry 1 or 2 marks. Question types are MCQ, MSQ and NAT. A wrong MCQ answer deducts 1/3 mark (1-mark question) or 2/3 mark (2-mark question); MSQ and NAT have no negative marking and MSQ has no partial marking.
From the exam body's own pages, checked 2026-11-08.
Sections
General Aptitude (15 marks)
Engineering Mathematics (13 marks)
Farm Machinery: Machine Design; Farm Machinery
Farm Power: Sources of Power; Farm Power (IC engines); Tractors and Power Tillers
Soil and Water Conservation Engineering: Fluid Mechanics; Soil Mechanics; Hydrology; Surveying and Levelling; Soil and Water Erosion; Watershed Management
Irrigation and Drainage Engineering: Soil-Water-Plant; Conveyance and Application; Agricultural Drainage; Groundwater Hydrology; Wells and Pumps
Agricultural Process Engineering: Engineering Properties; Evaporation and Drying; Size Reduction and Material Handling; Processing; Storage Systems
Dairy and Food Engineering: Heat and Mass Transfer; Preservation of Food
Fees: GATE 2027 application fee per the official fee page: Female/SC/ST/PwD candidates 1,000 (one paper) or 2,000 (two papers) in the regular period, 1,500 or 2,500 in the extended period; all other candidates including foreign nationals 2,000 or 4,000 in the regular period, 2,500 or 4,500 in the extended period. The page does not print a currency symbol.
How it has changed
Used for M.Tech/PhD admission and some PSU and government screening. The 7-section syllabus dates from the GATE 2021 revision and was revised for GATE 2027, adding precision-agriculture and renewable-energy equipment, bio-fuels, engine performance curves, soil compaction and the Proctor test, groundwater movement, osmotic dehydration and freeze drying, and unit operations in dairy and food engineering. Only Mathematics has an official weight; Laisha's count of the 2019–2026 papers gives technical-mark averages of about 11 (machinery), 13.5 (power), 16 (soil and water conservation), 9 (irrigation and drainage), 14 (process) and 9 (dairy and food). About 80–88% of technical marks need a calculation. Official reports: 2,362–2,624 candidates appeared each year in 2024–2026, qualifying mark 25 for the general category. Allowed two-paper combination: AG + CE.
How it differs from similar exams
AG follows the standard engineering-paper pattern (13 of the 85 subject marks are Engineering Mathematics), unlike DA whose subject marks have no separate mathematics block. The only allowed two-paper combination with AG is CE (Civil Engineering).
How to prepare for GATE
Study from the GATE 2027 AG syllabus PDF, not older ones: the 2027 text adds topics such as equipment for precision agriculture, renewable-energy-operated equipment, bio-fuels in farm mechanization, engine performance curves, soil compaction and the Proctor test, groundwater movement, osmotic dehydration and freeze drying, and a new 'Unit operations in Dairy and Food engineering' item (blanching, homogenization, pasteurization, sterilization).
Engineering Mathematics carries 13 marks: cover linear algebra, calculus, vector calculus, ODEs/PDEs and Laplace transforms, probability and statistics, and numerical methods (trapezoidal and Simpson's rules).
Farm Machinery and Farm Power are calculation-heavy: practise field capacity, efficiency, performance index, application rate, cost analysis of implements and tractors, and engine power, torque and fuel consumption.
Soil and Water Conservation spans six sub-topics: drill fluid mechanics (Bernoulli, Darcy-Weisbach, Hazen-Williams, weirs and notches), soil mechanics, hydrology (unit hydrograph, flood routing), surveying and erosion-control structures.
For Irrigation and Drainage, practise evapotranspiration, irrigation scheduling and efficiencies, drainage design, Darcy's law in aquifers, well flow and pump selection.
For Process and Dairy/Food Engineering, practise psychrometry, drying kinetics, size-reduction energy, heat-exchanger and heat/mass-transfer problems, and microbial death kinetics.
Where our 2188 questions for it fall
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Heaviest (55% of the questions): Engineering Mathematics (125); Theory of Machines (113); Soil Mechanics (100); Hydraulic Drives & Controls (94); Heat & Mass Transfer (90); Surveying & Levelling (89); Machine Design (88); Fluid Mechanics & Open Channel Hydraulics (87); Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) (71); Groundwater, Wells & Pumps (70); Mechanics of Tillage & Traction (Soil Dynamics) (68); Post-Harvest Engineering of Horticultural Crops (68); and 2 more.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
Middle band: Probability, Statistics & Data Analysis (62); Storage Engineering, Material Handling & Packaging (60); Watershed Hydrology (57); Post-Harvest Engineering of Cereals, Pulses & Oilseeds (55); Agricultural Drainage Engineering (51); Soil & Water Conservation Engineering (49); Engineering Properties of Agricultural Produce (49); Farm Power Sources (46); Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser (44); Food & Dairy Engineering (44); Renewable Energy Sources (Solar, Wind) (44); Bio-energy Systems: Design & Applications (42); and 2 more.
One pass per subject, then mixed sets across them.
Lighter: Tractor & Automotive Engines (IC Engines) (39); Human Engineering, Ergonomics & Safety (37); Engineering Thermodynamics (36); Watershed Planning & Management (36); Farm Machinery Testing, Evaluation & Standards (35); Farm Machinery Management & Economics (34); Farm Machinery & Equipment II — Plant Protection, Harvesting, Threshing (25); Strength of Materials (20); Engineering Mechanics (Statics & Dynamics) (17); Water Resources Management, Floods & Canal Systems (16); Remote Sensing, GIS & GNSS for Land & Water (11); Agricultural Structures & Environmental Control (5).
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Hardest share: Tractor & Automotive Engines (IC Engines) (22 hard of 39), Strength of Materials (11 hard of 20), Engineering Mechanics (Statics & Dynamics) (9 hard of 17).
Leave untimed time for these and read every explanation, including for the options you rejected.
Not confirmed from an official source, so not stated here: Exact admit-card release date (listed as TBA on the official important-dates page when checked).; Whether an on-screen virtual calculator is provided: the GATE 2027 question-paper-pattern page fetched did not mention it.; Which of several listed registration dates applied (the important-dates table shows original and revised dates together); registration was shown as closed on the home page.; Candidate numbers, qualifying marks and Laisha's topic-weight counts in the entry notes were not re-checked in this task (cut-off and report pages not fetched)..
8 practice questions, worked
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. Oil (2.0 kg/s, c = 2.1 kJ/kg·K) is cooled by water (1.0 kg/s, c = 4.18 kJ/kg·K). The capacity ratio C_r and the fluid that has C_min are
C_r = 0.995; oil has C_min
C_r = 0.50; water has C_min
C_r = 0.502; oil has C_min
C_r = 0.995; water has C_min
Answer and working
D. C_r = 0.995; water has C_min
C_oil = 2.0 × 2.1 = 4.20 kW/K; C_water = 1.0 × 4.18 = 4.18 kW/K. Water has the smaller C, so C_r = 4.18/4.20 = 0.995. Comparing mass flows alone (0.50) or specific heats alone (0.502) is wrong: C is the product m·c.
Heat & Mass Transfer · Heat exchangers: effectiveness-NTU method
2. The PDE u_xx + 4u_xy + 4u_yy = 0 is
parabolic
hyperbolic
not classifiable
elliptic
Answer and working
A. parabolic
For A u_xx + B u_xy + C u_yy, the discriminant B² − 4AC = 16 − 16 = 0 → parabolic. Negative → elliptic (Laplace), positive → hyperbolic (wave).
3. When flow is estimated with surface floats, the float velocity is multiplied by a coefficient less than one because:
Wind always slows floats
Floats always travel slower than the water around them because of drag
Surface velocity is higher than the mean velocity over the section
The cross-sectional area is overestimated
Answer and working
C. Surface velocity is higher than the mean velocity over the section
Velocity is highest near the surface and lowest near the bed and banks, so mean velocity is typically about 0.8–0.9 of surface velocity. Wind can push floats either way, and area is a separate measurement.
Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) · Water measurement: weirs, Parshall flume and orifices
4. A spur gear has 40 teeth and a pitch circle diameter of 160 mm. What is its module, and what is the usual textbook choice of face width?
4 mm; about 4 mm
40 mm; about 400 mm
0.25 mm; about 2.5 mm
4 mm; about 40 mm
Answer and working
D. 4 mm; about 40 mm
m = d/z = 160/40 = 4 mm. Face width is usually taken as about 10 m (range about 9.5 m to 12.5 m), so about 40 mm. 0.25 is z/d, the inverse.
Machine Design · Spur gear design (Lewis and Buckingham)
5. Two judges rank 8 samples of dried mango slices for colour. The differences between the two ranks for the samples are 1, −1, 2, 0, −2, 1, −1 and 0. What is Spearman's rank correlation coefficient?
Probability, Statistics & Data Analysis · Correlation and linear regression
6. A tractor with a 2.0 m wheelbase exerts a horizontal drawbar pull of 12 kN at a drawbar height of 0.5 m. What weight is transferred from the front to the rear axle (simple static approximation)?
48 kN
3.0 kN
6.0 kN·m
9.0 kN
Answer and working
B. 3.0 kN
Taking moments about the rear wheel contact: ΔW = P·h/L = 12 × 0.5 / 2.0 = 3.0 kN. Inverting the ratio gives 48 kN; multiplying P by h alone gives 6.0 kN·m, a moment, not a force; using (L − h) as the arm gives 9.0 kN.
Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser · Forces on tillage tools, draft and hitching
7. A cold-store wall of 150 m² consists of 230 mm brick (k = 0.7 W/m·K) and 100 mm insulation (k = 0.025 W/m·K). The outside air is at 40 °C with h = 20 W/m²·K and the inside air at 2 °C with h = 10 W/m²·K. The steady heat gain through the wall is closest to
1,320 W
1,270 W
11,900 W
8.5 W
Answer and working
B. 1,270 W
Resistance per m²: 1/20 + 0.23/0.7 + 0.10/0.025 + 1/10 = 0.05 + 0.3286 + 4.0 + 0.1 = 4.4786 m²·K/W. Flux q = 38/4.4786 = 8.485 W/m², and Q = 8.485 × 150 = 1,270 W. Ignoring the air films gives 1,320 W; leaving out the insulation gives 11,900 W; 8.5 W is the flux per square metre, not the total.
Heat & Mass Transfer · Composite walls and critical radius of insulation
8. Air is at 30 °C and 50% RH (p_vs at 30 °C = 4.246 kPa). Given saturation pressures of 2.064 kPa at 18 °C and 2.198 kPa at 19 °C, its dew point is closest to
18.4 °C
18.0 °C
15.0 °C
30.0 °C
Answer and working
A. 18.4 °C
p_v = 0.5 × 4.246 = 2.123 kPa. The dew point is where p_vs = p_v: interpolating, 18 + (2.123 − 2.064)/(2.198 − 2.064) = 18.4 °C. The dew point equals the dry-bulb (30 °C) only at 100% RH. 18.0 °C takes the lower table value without interpolating; 15.0 °C halves the dry-bulb temperature.
Post-Harvest Engineering of Cereals, Pulses & Oilseeds · Psychrometry and properties of air