ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
50written to this exam in this subject
11syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Reducing and using food-industry waste: characterisation and treatment of food-plant effluents, recovery of by-products, water and energy reduction, life-cycle assessment and circular-economy approaches. General agricultural waste engineering is in Agricultural Engineering's waste-management-environmental-engg.
Our 50 ICAR AICE-JRF/SRF questions in this subject: 2 easy, 41 medium, 7 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
Using the European definition of 60 g BOD₅ per person per day, how many population equivalents does a load of 1000 kg BOD per day represent?
About 16 667
About 600
About 1 700
About 60 000
Answer and working
A. About 16 667
PE = 1 000 000 g/60 g = 16 667. 60 000 multiplies instead of dividing; 1 700 and 600 slip a factor of ten or misuse units.
Question 2 · medium
Which process removes nitrogen biologically from treated effluent?
Nitrification followed by denitrification
Chlorination of the final effluent
Chemical precipitation with iron salts
Dissolved air flotation with polymers
Answer and working
A. Nitrification followed by denitrification
Ammonia is oxidised to nitrate aerobically and nitrate reduced to nitrogen gas under anoxic conditions. Iron salts remove phosphorus; DAF removes solids; chlorine disinfects.
Question 3 · hard
Why are strong food effluents often treated anaerobically first and then aerobically?
Aerobic treatment cannot remove any organic matter at all
Anaerobic removes most COD cheaply, then aerobic polishes
Aerobic treatment produces methane for the factory boilers
Answer and working
B. Anaerobic removes most COD cheaply, then aerobic polishes
Anaerobic reactors remove the bulk of COD with little energy and produce biogas, but their effluent usually needs aerobic polishing to meet BOD, ammonia and solids limits. Methane is an anaerobic product.
Question 4 · medium
Why must extracts from by-products be tested for contaminants before food use?
Contaminants are always destroyed by the extraction solvents
By-product extracts are exempt from food safety rules
Extracts from by-products never contain any bioactive compounds
Contaminants concentrate with the bioactives
Answer and working
D. Contaminants concentrate with the bioactives
Peels, husks and residues can carry pesticide residues, mycotoxins and heavy metals, which extraction may concentrate. Food safety rules and often novel-food approval apply.
Question 5 · hard
A plant wants to reuse treated effluent for cleaning food-contact surfaces. What is usually required?
Treatment to potable quality, monitoring and approval
Only removal of visible solids by screening before use
Nothing, since cleaning water needs no particular quality
Adding detergent to the effluent before it is reused
Answer and working
A. Treatment to potable quality, monitoring and approval
Water contacting food or food-contact surfaces must be potable; reclaimed water can reach this by membranes and disinfection, but regulators usually require approval and verification.
Question 6 · medium
A plant uses 200 000 kWh of grid electricity with an emission factor of 0.5 kg CO₂e per kWh. What are its scope 2 emissions?
10 t CO₂e
100 t CO₂e
1000 t CO₂e
400 t CO₂e
Answer and working
B. 100 t CO₂e
200 000 × 0.5 = 100 000 kg = 100 t CO₂e. 1000 t and 10 t slip a factor of ten; 400 t divides by the factor instead of multiplying.
Question 7 · medium
For most food companies, which scope contains the largest share of greenhouse gas emissions?
Scope 2, from purchased electricity
Scope 1, from boilers and company vehicles
Scope 3, dominated by agricultural raw materials
Scope 1, from refrigerant leaks alone
Answer and working
C. Scope 3, dominated by agricultural raw materials
Farm emissions (enteric methane, soil N₂O, land-use change) in the supply chain usually dwarf factory emissions.
Question 8 · medium
Which international agreement phases down hydrofluorocarbon refrigerants?
The Kigali Amendment to the Montreal Protocol
The Cartagena Protocol on Biosafety
The Codex General Principles of Food Hygiene
The WTO Agreement on Technical Barriers to Trade
Answer and working
A. The Kigali Amendment to the Montreal Protocol
The 2016 Kigali Amendment added HFCs to the Montreal Protocol for phase-down, encouraging natural refrigerants such as ammonia and CO₂.
Question 9 · medium
What is the functional unit in an LCA?
The smallest packaging size sold
The quantified performance to which all results refer
The unit of currency used for costs
The factory unit where the product is made
Answer and working
B. The quantified performance to which all results refer
All inputs, outputs and impacts are expressed per functional unit, such as 1 kg of packaged cheese at retail, so that comparisons are fair.
Question 10 · medium
In the 2020 definition, what makes a food "upcycled"?
It is made from ingredients grown without any fertiliser
Inputs otherwise not eaten, from verifiable supply chains
It is sold in recycled or compostable packaging only
It is any food sold at a discount near its date mark
Answer and working
B. Inputs otherwise not eaten, from verifiable supply chains
Upcycled foods use inputs that would otherwise not go to human consumption, are produced with verifiable supply chains and have positive environmental impact. Packaging, farming method or discounts do not define it.
A study plan for Food Waste Valorisation, By-products & Sustainable Food Processing in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (50% of the 50 questions): Life-cycle assessment of food products (7, 14%); Anaerobic digestion of food-processing waste (6, 12%); Environmental regulation for food industries (6, 12%); Extraction of bioactives from by-products (6, 12%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Effluent treatment for food plants: primary, secondary and tertiary (5, 10%); Water reuse and water footprint in food plants (5, 10%); Circular economy and upcycled foods (4, 8%); Energy efficiency and carbon footprint (4, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Characteristics of food-industry wastes: BOD, COD and solids (3, 6%); Food loss and waste along the chain (3, 6%); Recovery of by-products from fruit, cereal, dairy, meat and fish processing (1, 2%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Food loss and waste along the chain (1 hard of 3), Life-cycle assessment of food products (2 hard of 7), Effluent treatment for food plants: primary, secondary and tertiary (1 hard of 5).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Effluent treatment for food plants: primary, secondary and tertiary (1 easy of 5); Life-cycle assessment of food products (1 easy of 7).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.