ICAR AICE-JRF/SRF General Microbiology: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
17written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
General Microbiology in ICAR AICE-JRF/SRF
The microbial world before it meets food: cell structure, staining, growth, nutrition, genetics and control of bacteria, yeasts, moulds and viruses. Food microbiology (phase 2) builds directly on it.
Our 17 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 4 medium, 13 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · hard
Why can the light microscope not resolve two points 0.1 µm apart, whatever the magnification?
Resolution is limited by the wavelength of visible light to near 0.2 µm
Immersion oil reduces the numerical aperture below 0.5 at 1000× magnification
Eyepieces stronger than 10× distort the image beyond use at any aperture
Glass lenses absorb all light reflected from objects smaller than 0.5 µm
Answer and working
A. Resolution is limited by the wavelength of visible light to near 0.2 µm
Resolution depends on λ and NA, not magnification; with visible light and NA about 1.4 the limit is about 0.2 µm. Oil raises NA rather than lowering it.
Question 2 · hard
Gram-negative bacteria are often more resistant than Gram-positive bacteria to quaternary ammonium compounds and some dyes mainly because they have:
Teichoic acids that neutralise cationic chemicals at the surface
Endospores in every cell during exponential growth
An outer membrane that acts as a permeability barrier
A thicker peptidoglycan wall that traps the agents
Answer and working
C. An outer membrane that acts as a permeability barrier
The outer membrane with LPS restricts entry of many hydrophobic and cationic agents. Gram-negatives have thin peptidoglycan and no teichoic acids.
Question 3 · hard
Two bacterial isolates have an average nucleotide identity of their genomes of 99%. Under current genome-based taxonomy they are:
Members of different species in one genus
Members of the same species
Members of different genera in one family
Members of different domains of life
Answer and working
B. Members of the same species
An ANI above about 95–96% indicates the same species.
Question 4 · medium
Which correctly matches the sexual spore with its fungal group?
Ascospores in an ascus — Ascomycota
Basidiospores — Mucoromycota
Conidia — Ascomycota sexual stage
Zygospores — Basidiomycota
Answer and working
A. Ascospores in an ascus — Ascomycota
Ascomycota form ascospores in asci; Mucoromycota form zygospores; Basidiomycota form basidiospores. Conidia are asexual.
Question 5 · hard
Norovirus and hepatitis A virus are harder to inactivate with alcohol-based hand rubs than enveloped viruses because they:
Grow in foods and reach very high numbers before washing
Have no lipid envelope for alcohol to disrupt
Carry DNA genomes that are protected by thick peptidoglycan
Form spores that resist alcohol and drying for many months
Answer and working
B. Have no lipid envelope for alcohol to disrupt
Non-enveloped capsids resist lipid solvents; these viruses do not grow in food or form spores, and both have RNA genomes.
Question 6 · hard
A medium contains an antibiotic that loses activity when heated. The correct way to prepare it is to:
Autoclave the base, cool to 50 °C, add filter-sterilised antibiotic
Boil the antibiotic for 1 minute and add it to the hot medium
Autoclave the base and antibiotic together at 121 °C for 30 minutes
Add the antibiotic unsterilised because it kills all contaminants
Answer and working
A. Autoclave the base, cool to 50 °C, add filter-sterilised antibiotic
Heat-labile supplements are filter-sterilised and added to cooled sterile base. Autoclaving or boiling would destroy the antibiotic.
Question 7 · hard
What happens in a chemostat if the dilution rate is set above the organism's maximum specific growth rate?
The culture moves into a new steady state at a higher cell density
Substrate in the vessel falls to zero and cells sporulate
Growth rate rises above μmax to match the higher dilution rate
Cells wash out faster than they grow, and the culture is lost
Answer and working
D. Cells wash out faster than they grow, and the culture is lost
Cells cannot grow faster than μmax, so at D > μmax numbers fall continuously (washout) and substrate rises toward the feed concentration.
Question 8 · hard
In an Hfr × F⁻ cross, the recipient usually remains F⁻ because:
Hfr cells lack a sex pilus and so cannot make stable contact with recipients
Hfr cells transfer only plasmid DNA and never chromosomal genes
The rest of F enters last, and whole-chromosome transfer is rare
The recipient destroys the F plasmid with restriction enzymes
Answer and working
C. The rest of F enters last, and whole-chromosome transfer is rare
In Hfr strains F is integrated; transfer starts in the middle of F, so the rest of F enters only after the entire chromosome, which the mating rarely completes.
Question 9 · medium
The Ames test screens chemicals for mutagenicity by counting:
His⁻ Salmonella revertants that grow without histidine
Yeast cells that lose the ability to ferment sucrose
Mouse liver cells that form tumours after injection
Colonies of E. coli that become resistant to phage T1 after exposure
Answer and working
A. His⁻ Salmonella revertants that grow without histidine
His⁻ auxotrophs revert to His⁺ at a higher rate after mutagen exposure, often with liver-enzyme activation.
Question 10 · hard
A culture tube of Listeria breaks on the bench. The correct first sequence of actions is:
Switch on the bench UV lamp and leave the room for ten minutes
Wipe it up at once with a dry paper towel and discard in the bin
Pour 70% ethanol and light it to burn off the culture
Cover with absorbent, flood with disinfectant, then wait
Answer and working
D. Cover with absorbent, flood with disinfectant, then wait
Warn others, contain the spill, allow the disinfectant contact time and then clean-up with PPE; wiping dry spreads aerosols, and UV does not penetrate liquid.
A study plan for General Microbiology in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (53% of the 17 questions): Growth curve, generation time and growth kinetics (3, 18%); Microbial genetics: mutation, plasmids, transformation, transduction and conjugation (3, 18%); Bacteria, yeasts, moulds and actinomycetes: morphology and classification (2, 12%); Aseptic technique and laboratory biosafety (1, 6%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Control of microorganisms: physical and chemical agents and death kinetics (1, 6%); History and scope of microbiology (1, 6%); Measurement of growth: serial dilution, plate count, MPN and turbidity (1, 6%); Microbial nutrition and culture media (1, 6%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Microscopy: light, phase-contrast, fluorescence and electron (1, 6%); Prokaryotic and eukaryotic cell structure; spores and vegetative cells (1, 6%); Staining: simple, Gram, acid-fast and endospore (1, 6%); Viruses and bacteriophages (1, 6%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Aseptic technique and laboratory biosafety (1 hard of 1), Control of microorganisms: physical and chemical agents and death kinetics (1 hard of 1), Measurement of growth: serial dilution, plate count, MPN and turbidity (1 hard of 1).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.