LAISHA
Open Laisha

Rajasthan PSC Farm Power Sources: practice questions

Rajasthan PSC — Assistant Agriculture Engineer (Agriculture Engineering syllabus) · India · Rajasthan Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
32written to this exam in this subject
9syllabus units

About Rajasthan PSC

Rajasthan PSC — Assistant Agriculture Engineer (Agriculture Engineering syllabus) is a government recruitment exam run by Rajasthan Public Service Commission, for candidates in India. Objective paper; the paper structure was not captured.

Source: rpsc.rajasthan.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Farm Power Sources in Rajasthan PSC

Farm power portion: sources of power, kW/ha, mechanisation schemes and custom hiring; direct formula questions.

Where the energy for farm work comes from, how much is available, and how mechanisation is measured.

Our 32 Rajasthan PSC questions in this subject: 21 easy, 7 medium, 4 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Rajasthan PSC and are not shown on any other exam's page.

Question 1 · easy

Why can a person usually deliver more sustained power by pedalling than by cranking with the arms?

  1. Pedalling needs no oxygen
  2. Arm work has a higher gross efficiency but tires faster
  3. Pedalling transfers body heat to the machine
  4. Leg muscles are larger
Answer and working

D. Leg muscles are larger

The leg muscles are the largest in the body, so pedalling or treading devices (pedal threshers, treadle pumps) let a worker sustain more power. All muscular work needs oxygen, and arm work is not more efficient.

Question 2 · easy

Express 0.1 imperial (mechanical) horsepower in watts.

  1. 73.5 W
  2. 74.6 W
  3. 7.46 W
  4. 746 W
Answer and working

B. 74.6 W

1 imperial hp ≈ 745.7 W, so 0.1 hp = 74.6 W. 73.5 W uses the metric horsepower (735.5 W), a different unit; the other two are decimal slips.

Question 3 · easy

A pair of animals pulls 90 kgf at 1 m/s. What is the output in metric horsepower?

  1. 0.12 hp
  2. 12.0 hp
  3. 1.20 hp
  4. 0.90 hp
Answer and working

C. 1.20 hp

Metric hp = kgf × m/s ÷ 75 = 90 × 1 / 75 = 1.20 hp. (In imperial hp it would be 90 × 9.81 / 745.7 = 1.18 hp.) The other options misplace the decimal or divide by 100.

Question 4 · easy

If a bullock pair delivers 0.75 kW, how many pairs would match the 30 kW drawbar power of a tractor (power only, ignoring working hours)?

  1. 22.5 pairs
  2. 40 pairs
  3. 20 pairs
  4. 80 pairs
Answer and working

B. 40 pairs

30/0.75 = 40 pairs. 22.5 multiplies instead of dividing; halving or doubling confuses pairs with single animals. In practice the tractor also works more hours per day, so the real gap is wider.

Question 5 · hard

A smallholder with 3 ha asks whether to buy a 35 kW tractor that would work only 150 hours a year. What is the soundest advice on cost grounds?

  1. Hire or share a tractor, because fixed costs spread over so few hours make each hour costly
  2. Buy a larger tractor so that each hour covers more area
  3. Buy the tractor, because ownership always costs less per hour than hiring, whatever the annual use
  4. Keep bullocks, because animal power is always cheaper per unit of work than tractor power
Answer and working

A. Hire or share a tractor, because fixed costs spread over so few hours make each hour costly

Fixed costs (depreciation, interest, housing, insurance) are spread over annual hours; at 150 h/year the cost per hour is high. Custom hiring, cooperatives or machinery rings spread these costs. A bigger tractor worsens the problem. No source is 'always' cheaper: the comparison with animals depends on local feed, wage, fuel and hire costs.

Question 6 · easy

Standard Test Conditions (STC) for rating PV modules are:

  1. 1367 W/m², 25 °C ambient temperature, air mass 0
  2. 1000 W/m² irradiance, 25 °C cell temperature, air mass 1.5
  3. 800 W/m², 20 °C ambient temperature, 1 m/s wind
  4. 1000 W/m², 45 °C cell temperature, air mass 2
Answer and working

B. 1000 W/m² irradiance, 25 °C cell temperature, air mass 1.5

STC is 1000 W/m², 25 °C cell temperature and AM1.5 spectrum. 800 W/m² with 20 °C ambient and 1 m/s wind are conditions used for nominal operating cell temperature, not STC.

Question 7 · easy

A fuel labelled E10 is:

  1. Ethanol containing 10% petrol by volume
  2. Petrol containing 10% ethanol by volume
  3. Diesel with 10% biodiesel
  4. Petrol with 10% methanol by mass
Answer and working

B. Petrol containing 10% ethanol by volume

Ethanol blends are named by the percentage of ethanol by volume in petrol: E10 is 10% ethanol. Biodiesel blends use B (B20 = 20% biodiesel in diesel).

Question 8 · medium

What is the main operational difference between a floating-drum and a fixed-dome biogas digester?

  1. Floating drum: nearly constant gas pressure; fixed dome: no moving parts, but gas pressure varies
  2. The fixed dome delivers gas at constant pressure; the floating drum's pressure varies widely as gas is drawn off
  3. Only the floating drum can digest cattle dung
  4. The fixed dome must be made of steel, the floating drum of masonry
Answer and working

A. Floating drum: nearly constant gas pressure; fixed dome: no moving parts, but gas pressure varies

In a floating-drum plant the steel gas holder rises and falls, keeping pressure nearly constant. In a fixed-dome (masonry) plant, gas displaces slurry and pressure rises as gas accumulates; it is cheaper and has no moving parts.

Question 9 · easy

Farm power availability, as used in mechanisation statistics, is usually expressed as:

  1. Number of tractors per village
  2. Diesel consumed by tractors and engines per hectare per year, in litres per hectare
  3. Total power from all farm power sources divided by cultivated area, in kW/ha
  4. Electricity consumed per farm per year, in kWh
Answer and working

C. Total power from all farm power sources divided by cultivated area, in kW/ha

It sums power from humans, animals, tractors, power tillers, engines and motors (with conventional factors for animate power) and divides by cultivated area, usually net sown area. The basis must be stated.

Question 10 · easy

Over the past several decades in India, the composition of farm power has shifted in which direction?

  1. The share of animal power has risen steadily
  2. Animate power's share has fallen while that of tractors, engines and electric motors has risen
  3. Farm power per hectare has fallen
  4. Electric motors have been replaced by draught animals for pumping because rural power supply has declined
Answer and working

B. Animate power's share has fallen while that of tractors, engines and electric motors has risen

Published estimates show total farm power per hectare rising and the share of animate sources falling as tractors, power tillers, diesel engines and electric pump motors spread. Exact figures depend on method and year.

A study plan for Farm Power Sources in Rajasthan PSC

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (47% of the 32 questions): Farm power availability (kW/ha) (6, 19%); Animal draught power and harnessing (5, 16%); Biomass and biofuels as power sources (4, 13%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Electrical power on the farm (4, 13%); Mechanical power: engines and tractors (4, 13%); Human power and its limits (3, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Mechanisation indices (2, 6%); Solar power as a farm power source (2, 6%); Wind power as a farm power source (2, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Farm power availability (kW/ha) (2 hard of 6), Electrical power on the farm (1 hard of 4), Mechanical power: engines and tractors (1 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Human power and its limits (3 easy of 3); Solar power as a farm power source (2 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Rajasthan PSC Farm Power Sources

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.