LAISHA
Open Laisha

ASRB NET Precision Agriculture & System Management: practice questions

ASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering · India · Agricultural Scientists Recruitment Board (ICAR)

Original practice questions written to the published syllabus · not past papers
10worked here, free
58written to this exam in this subject
10syllabus units

About ASRB NET

ASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering is a specialist certification exam run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. NET: 150 MCQs, 150 marks, 2 hours, −1/3 per wrong answer, English/Hindi, PG level. Combined NET/ARS/SMS/STO recruitment runs prelims, mains and interview.

Official site: pw.live.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Precision Agriculture & System Management in ASRB NET

Guidance, auto-steer, yield monitors, variable-rate applicators and section control as machine systems; calibration and field-capacity calculations with precision tools.

Using positioning, sensing and variable-rate control to manage fields by the metre instead of by the hectare.

Our 58 ASRB NET questions in this subject: 28 easy, 27 medium, 3 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ASRB NET and are not shown on any other exam's page.

Question 1 · easy

Which accuracy class is usually adequate for broadcasting fertiliser with a 24 m spinner spreader?

  1. RTK, about 2 cm, always required
  2. SBAS, sub-metre to about one metre
  3. Uncorrected code, about 50 m
  4. Survey static, millimetre after hours
Answer and working

B. SBAS, sub-metre to about one metre

A wide spinner spreader with overlapping patterns does not benefit from centimetre accuracy; SBAS is usually adequate. RTK is needed for planting, strip tillage and controlled traffic. Uncorrected GNSS is a few metres, not 50 m.

Question 2 · medium

A 9 m cultivator works at 8 km/h with a field efficiency of 0.75. Its effective field capacity is

  1. 5.4 ha/h
  2. 7.2 ha/h
  3. 54 ha/h
  4. 0.54 ha/h
Answer and working

A. 5.4 ha/h

C = S × W × E / 10 = 8 × 9 × 0.75 / 10 = 5.4 ha/h. 7.2 ha/h is the theoretical capacity (no efficiency); 54 and 0.54 are factor-of-ten slips from the /10 conversion.

Question 3 · easy

Which guidance pattern suits a field irrigated by a centre pivot?

  1. Straight A-B line across the full field width
  2. A-plus-heading line set to true north
  3. Spiral from the field corner inwards
  4. Circle pattern around the pivot centre
Answer and working

D. Circle pattern around the pivot centre

Circle patterns follow the concentric wheel tracks of a centre pivot. A straight line crosses the pivot tracks; A-plus-heading is still straight; a spiral from the corner ignores the circular layout.

Question 4 · easy

What distinguishes sensor-based from map-based variable-rate application?

  1. Sensor-based systems measure the crop or soil on the go and set the rate without a prior map
  2. Sensor-based systems need a prescription map loaded before work begins, and map-based ones do not
  3. Sensor-based systems vary only the ground speed, while map-based systems vary the flow
  4. Sensor-based systems work only on liquids, while map-based systems work only on granules
Answer and working

A. Sensor-based systems measure the crop or soil on the go and set the rate without a prior map

Sensor-based VRT converts on-the-go measurements to a rate through an algorithm; map-based VRT reads a stored prescription. Both can handle liquids or granules and both vary the flow, not the speed.

Question 5 · medium

A sprayer applies 120 L/ha at 10 km/h with nozzles spaced 0.5 m. The flow required from each nozzle is

  1. 0.1 L/min
  2. 1.0 L/min
  3. 10 L/min
  4. 2.0 L/min
Answer and working

B. 1.0 L/min

q = rate × speed × spacing / 600 = 120 × 10 × 0.5 / 600 = 1.0 L/min. 10 L/min and 0.1 L/min are factor-of-ten slips in the 600 constant; 2.0 L/min drops the 0.5 m spacing (treats it as 1 m).

Question 6 · easy

In a semivariogram, the range is

  1. the variance at zero separation caused by measurement error and fine-scale noise
  2. the distance beyond which sample values are no longer spatially correlated
  3. the difference between the largest and smallest sample values in the field
  4. the plateau of semivariance reached at large separation distances
Answer and working

B. the distance beyond which sample values are no longer spatially correlated

Range is the correlation distance. Variance at zero distance is the nugget; the plateau is the sill; max minus min is the statistical range of the data, not the semivariogram range.

Question 7 · easy

A 40 ha field is sampled on a regular 1 ha grid with one composite sample per cell. How many samples are analysed?

  1. 4
  2. 400
  3. 40
  4. 99
Answer and working

C. 40

One sample per 1 ha cell in 40 ha = 40 samples. 4 and 400 are decimal slips; 99 takes one sample per acre (40 ha ≈ 99 acres).

Question 8 · easy

Why is near-infrared reflectance high from healthy green leaves?

  1. Chlorophyll absorbs near-infrared strongly and re-emits it as heat
  2. Light is scattered at the cell-air boundaries in the spongy mesophyll
  3. Leaf water absorbs strongly at near-infrared wavelengths near 700 nm
  4. The leaf cuticle reflects all wavelengths equally like a mirror
Answer and working

B. Light is scattered at the cell-air boundaries in the spongy mesophyll

Internal scattering in the mesophyll produces the high NIR plateau. Chlorophyll absorbs red and blue, not NIR; water absorption bands lie near 1450 and 1940 nm; the cuticle is not a perfect mirror.

Question 9 · medium

Soil apparent electrical conductivity (ECa) measured by electromagnetic induction in a non-saline field mostly reflects

  1. Soil nitrate concentration in the top 5 cm, which controls in-season nitrogen supply
  2. Soil organic carbon in the surface crust only
  3. Clay content and soil water, which control water-holding capacity
  4. The depth of a deep water table lying more than 10 m below the soil surface
Answer and working

C. Clay content and soil water, which control water-holding capacity

In non-saline soils ECa is driven mainly by clay and water content, so it maps texture and water-holding capacity. It is not a nitrate sensor, surface organic carbon is not its main driver, and its depth of response is a few metres at most.

Question 10 · medium

The ISOBUS tractor ECU (ISO 11783-9) mainly

  1. passes tractor data such as speed, hitch and PTO status onto the implement bus
  2. stores all prescription maps and logs yield data for the whole farm
  3. controls the implement's metering units directly without an implement ECU
  4. provides the RTK corrections to every implement connected to the bus
Answer and working

A. passes tractor data such as speed, hitch and PTO status onto the implement bus

The TECU is the gateway between the tractor's internal network and the implement bus, supplying speed, hitch, PTO and other signals. Task data sit with the task controller; implements have their own ECUs; corrections go to the receiver.

A study plan for Precision Agriculture & System Management in ASRB NET

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (48% of the 58 questions): Variable-rate technology (8, 14%); ISOBUS basics (7, 12%); Yield monitoring (7, 12%); Auto-steer and guidance (6, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Prescription maps (6, 10%); Proximal and remote sensing for crops (6, 10%); Section control (6, 10%); GNSS and RTK positioning (5, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Farm management information systems (4, 7%); Farm data management (3, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Section control (1 hard of 6), ISOBUS basics (1 hard of 7), Variable-rate technology (1 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Farm management information systems (3 easy of 4); Prescription maps (4 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ASRB NET Precision Agriculture & System Management

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.