LAISHA
Open Laisha

ASRB NET Heat & Mass Transfer: practice questions

ASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering · India · Agricultural Scientists Recruitment Board (ICAR)

Original practice questions written to the published syllabus · not past papers
10worked here, free
48written to this exam in this subject
12syllabus units

About ASRB NET

ASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering is a specialist certification exam run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. NET: 150 MCQs, 150 marks, 2 hours, −1/3 per wrong answer, English/Hindi, PG level. Combined NET/ARS/SMS/STO recruitment runs prelims, mains and interview.

Official site: pw.live.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Heat & Mass Transfer in ASRB NET

Conceptual MCQs across the whole subject with emphasis on cold-store insulation, heat-exchanger types used in dairies, drying theory and the physical meaning of dimensionless groups.

Conduction, convection, radiation, heat exchangers and diffusion — the physics of drying, cooling, freezing and cold-store walls.

Our 48 ASRB NET questions in this subject: 27 easy, 20 medium, 1 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ASRB NET and are not shown on any other exam's page.

Question 1 · medium

A plastic insulation with k = 0.2 W/m·K is applied to a thin electric wire cooled by natural convection with h = 8 W/m²·K. The critical radius of insulation is

  1. 25 mm
  2. 50 mm
  3. 12.5 mm
  4. 40 mm
Answer and working

A. 25 mm

For a cylinder r_c = k/h = 0.2/8 = 0.025 m = 25 mm. 50 mm is the sphere value 2k/h; 12.5 mm halves instead of doubling; 40 is h/k (in m⁻¹), the inverted ratio.

Question 2 · medium

A small spherical vessel is insulated with a material of k = 0.05 W/m·K and loses heat to air with h = 5 W/m²·K. The critical radius of insulation for this sphere is

  1. 10 mm
  2. 40 mm
  3. 20 mm
  4. 100 mm
Answer and working

C. 20 mm

For a sphere r_c = 2k/h = 2 × 0.05/5 = 0.02 m = 20 mm. 10 mm is the cylinder value k/h; 100 is h/k, the inverted ratio in m⁻¹. 40 mm doubles the sphere value (4k/h).

Question 3 · easy

The Nusselt number for convection from a surface of characteristic length L is defined as

  1. hL/k, with k the conductivity of the fluid
  2. hL/k, with k the conductivity of the solid
  3. c_pμ/k of the fluid
  4. ρVL/μ of the fluid
Answer and working

A. hL/k, with k the conductivity of the fluid

Nu = hL/k_fluid is the ratio of convective to conductive heat transfer across the fluid layer. The same grouping with the solid's conductivity is the Biot number, which governs transient conduction. c_pμ/k is the Prandtl number and ρVL/μ the Reynolds number.

Question 4 · easy

For air at ordinary temperatures the Prandtl number is approximately

  1. 7
  2. 0.7
  3. 0.07
  4. 70
Answer and working

B. 0.7

Air has Pr ≈ 0.7, so its velocity and thermal boundary layers are of similar thickness. About 7 is typical of water near room temperature; oils and viscous food liquids have much higher values. 0.07 is a factor-of-ten slip.

Question 5 · medium

For a parallel-flow heat exchanger in which both fluids have equal heat-capacity rates (C_r = 1), the effectiveness

  1. approaches 1 as NTU becomes large
  2. equals NTU/(1 + NTU)
  3. never exceeds 0.5, however large the area
  4. is the same as for counterflow at every NTU
Answer and working

C. never exceeds 0.5, however large the area

Parallel flow: ε = [1 − exp(−2NTU)]/2, which tends to 0.5 as NTU → ∞; the two streams approach a common outlet temperature halfway between the inlets. NTU/(1 + NTU), which does tend to 1, is the counterflow result for C_r = 1.

Question 6 · easy

In Fick's first law, J_A = −D_AB dC_A/dx, the diffusion coefficient D_AB has units of

  1. m/s
  2. kg/m²·s
  3. m²/s·K
  4. m²/s
Answer and working

D. m²/s

J (kmol/m²·s) divided by dC/dx (kmol/m³ per m = kmol/m⁴) gives m²/s, the same units as thermal diffusivity α and kinematic viscosity ν. m/s is the unit of a convective mass-transfer coefficient h_m.

Question 7 · medium

1,000 kg of paddy at 22% moisture (wet basis) is dried to 14% (wet basis). The mass of water removed is closest to

  1. 80.0 kg
  2. 93.0 kg
  3. 102.6 kg
  4. 907.0 kg
Answer and working

B. 93.0 kg

Dry matter stays constant: 1,000 × 0.78 = 780 kg. Final mass = 780/0.86 = 907.0 kg. Water removed = 1,000 − 907.0 = 93.0 kg. Subtracting percentages on the initial mass gives 80.0 kg, a common error; dividing that by 0.78 gives 102.6 kg; 907.0 kg is the dried product mass.

Question 8 · medium

During thin-layer drying a sample's moisture falls from an initial 0.60 to 0.25 kg water/kg dry matter; its equilibrium moisture content is 0.05 kg/kg (all dry basis). The moisture ratio MR = (M − M_e)/(M_0 − M_e) is

  1. 0.417
  2. 0.636
  3. 0.333
  4. 0.364
Answer and working

D. 0.364

MR = (0.25 − 0.05)/(0.60 − 0.05) = 0.20/0.55 = 0.364. Ignoring M_e gives 0.417; 0.636 is the fraction of removable moisture already removed (1 − MR); subtracting M_e from the numerator only gives 0.333.

Question 9 · medium

If internal diffusion controls the falling-rate drying of fruit slices, halving the slice thickness (all else unchanged) changes the time to reach a given moisture ratio by a factor of about

  1. 1/2
  2. 1/8
  3. 1/4
  4. 1 (no change)
Answer and working

C. 1/4

In the diffusion solution MR depends on D_eff t/L², so for a fixed MR, t ∝ L². Halving L gives (1/2)² = 1/4 of the time. The factor 1/2 would apply if drying were controlled by surface area per mass under external control, as in the constant-rate period.

Question 10 · easy

The characteristic length L_c = V/A_s used in the lumped-capacitance Biot number for a long solid cylinder of radius r is

  1. r/3
  2. r
  3. r/2
  4. 2r
Answer and working

C. r/2

V/A_s = πr²L/(2πrL) = r/2 for a long cylinder (ends neglected). r/3 is the sphere value, and the half-thickness is used for a plane wall cooled on both faces.

A study plan for Heat & Mass Transfer in ASRB NET

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (50% of the 48 questions): Composite walls and critical radius of insulation (8, 17%); Simultaneous heat and mass transfer in drying (8, 17%); Convection and dimensionless numbers (Nu, Re, Pr) (4, 8%); Convective mass transfer (4, 8%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Radiation: Stefan-Boltzmann law and view factors (4, 8%); Transient conduction: lumped capacity and Heisler charts (4, 8%); Condensation and boiling (3, 6%); Diffusive mass transfer and Fick's law (3, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Extended surfaces (fins) (3, 6%); Steady conduction through plane walls and cylinders (3, 6%); Heat exchangers: effectiveness-NTU method (2, 4%); Heat exchangers: LMTD method (2, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Composite walls and critical radius of insulation (1 hard of 8).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Heat exchangers: LMTD method (2 easy of 2); Convection and dimensionless numbers (Nu, Re, Pr) (3 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ASRB NET Heat & Mass Transfer

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.