ASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering
India · Agricultural Scientists Recruitment Board (ICAR) · secondary source
1738practice questions written to this syllabus
41subjects
What ASRB NET is
ASRB NET — Farm Machinery & Power / Land & Water Management Engineering / Agricultural Structures & Process Engineering is a specialist certification exam run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.
Check the current format, eligibility, fees and dates on the official site: pw.live.
How it has changed
NET is eligibility for lectureship/assistant professor; ARS is scientist recruitment. Qualifying marks reported as 50% (UR), 45% (EWS/OBC), 40% (SC/ST/PwBD).
How to prepare for ASRB NET
Where our 1738 questions for it fall
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Heaviest (54% of the questions): Workshop Technology & Manufacturing (125); Post-Harvest Engineering of Horticultural Crops (100); Agricultural Drones, Robotics & Automation (82); Engineering Properties of Agricultural Produce (80); Food Quality, Safety & Process Plant Design (64); Refrigeration, Air-Conditioning & Cold-Chain Engineering (63); Precision Agriculture & System Management (58); Bio-energy Systems: Design & Applications (58); Soil Science for Engineers (57); Water Resources Management, Floods & Canal Systems (57); Post-Harvest Engineering of Cereals, Pulses & Oilseeds (54); Food & Dairy Engineering (49); and 2 more.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
Middle band: Agricultural Drainage Engineering (44); Farm Machinery & Equipment II — Plant Protection, Harvesting, Threshing (43); Hydraulic Drives & Controls (43); Machine Design (42); Renewable Energy Sources (Solar, Wind) (40); Theory of Machines (38); Watershed Planning & Management (38); Farm Power Sources (37); Farm Machinery Management & Economics (37); Soil Mechanics (36); Fluid Mechanics & Open Channel Hydraulics (35); Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser (34); and 2 more.
One pass per subject, then mixed sets across them.
Lighter: Surveying & Levelling (30); Instrumentation, Sensors & Process Control (29); Sprinkler & Micro-Irrigation Systems (29); Human Engineering, Ergonomics & Safety (25); Watershed Hydrology (24); Agricultural Structures & Environmental Control (24); Mechanics of Tillage & Traction (Soil Dynamics) (22); Soil & Water Conservation Engineering (22); Tractor Systems & Controls (18); Tractor & Automotive Engines (IC Engines) (17); Groundwater, Wells & Pumps (15); Engineering Thermodynamics (6); and 1 more.
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Hardest share: Tractor Systems & Controls (15 hard of 18), Engineering Thermodynamics (5 hard of 6), Watershed Hydrology (17 hard of 24).
Leave untimed time for these and read every explanation, including for the options you rejected.
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. Using the IIW formula, what is the carbon equivalent of a steel with 0.45% C, 0.75% Mn and negligible other alloying elements?
0.450
1.200
0.700
0.575
Answer and working
D. 0.575
CE = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15 = 0.45 + 0.75/6 = 0.45 + 0.125 = 0.575. 0.450 ignores manganese; 1.200 adds manganese at full weight; 0.700 divides manganese by 3. A value this high normally calls for preheat and low-hydrogen practice.
Workshop Technology & Manufacturing · MIG and TIG welding and testing of welded joints
2. On small and medium tractors with a mechanical draft-control system, the draft signal is traditionally taken from
the oil pressure in the lift cylinder measured with a pressure switch
the engine speed drop sensed by a governor linkage under heavy load
the compressive force in the top link acting on a calibrated spring
the tension in the lift rods measured by strain gauges on each rod
Answer and working
C. the compressive force in the top link acting on a calibrated spring
With a mounted implement the top link is usually in compression and the force rises with draft; a spring at its tractor end deflects and moves the control valve. Larger tractors sense lower-link forces, now with electronic load pins. Lift-cylinder pressure reflects implement weight more than draft, and engine-speed sensing is not the basis of draft control.
Hydraulic Drives & Controls · Tractor hydraulic systems
3. A cylinder (80 mm bore, 56 mm rod) is speed-controlled by a meter-out valve on the rod-end line. The relief is set at 160 bar. With no external load, pressure in the rod end during extension can reach about
314 bar
160 bar
82 bar
327 bar
Answer and working
A. 314 bar
With no load, the cap-end force p × Ap must be balanced by rod-end pressure on the annulus: p_rod = 160 × Ap/Aa = 160 × 5027/2564 = 314 bar. This intensification can exceed the ratings of seals and hoses. Assuming 160 bar ignores the area ratio; 82 inverts it; using the rod area gives 327.
Hydraulic Drives & Controls · Pressure relief and flow control valves
4. A dough has a relaxation time of 100 s. During 1-second mixing strokes it behaves elastically, but over a 1-hour proof it flows. This is explained by
the Reynolds number, which exceeds 2100 during mixing and falls below it during proofing
the Deborah number λ/t_obs, far above 1 during mixing and far below 1 during proofing
the Biot number, which is high during mixing because of fast heat transfer at the surface
the flow behaviour index n, which changes from below 1 to above 1 as the dough rests
Answer and working
B. the Deborah number λ/t_obs, far above 1 during mixing and far below 1 during proofing
De = 100/1 = 100 during mixing (solid-like) and 100/3600 ≈ 0.03 over the proof (liquid-like). The Reynolds number concerns inertia against viscosity in flow, the Biot number concerns heat-transfer resistances, and a change in n is not what makes dough flow on resting.
Engineering Properties of Agricultural Produce · Viscoelastic models
5. Curray's roundness of a fruit resting in its natural position is calculated as
geometric mean diameter divided by the major diameter, both measured with a vernier calliper on the fruit
radius of the largest inscribed circle multiplied by the number of corners counted on the outline
surface area of the fruit divided by its volume, expressed per millimetre of the fruit's length
projected area of the fruit divided by the area of the smallest circle circumscribing the projection
Answer and working
D. projected area of the fruit divided by the area of the smallest circle circumscribing the projection
Curray's roundness = A_p / A_c. The geometric mean over major diameter is Mohsenin's sphericity, not roundness. Wadell's roundness divides the summed corner radii by N R, rather than multiplying. Surface-to-volume ratio is a different shape index used in heat and mass transfer.
Engineering Properties of Agricultural Produce · Size and shape: sphericity and roundness
6. A small reservoir has 60,000 m³ of dead storage. Sediment inflow is 6,000 t/yr, trap efficiency 85% and deposit dry density 1.2 t/m³. Assuming these stay constant, the dead storage fills in about:
10.2 years
12.0 years
11.8 years
14.1 years
Answer and working
D. 14.1 years
Volume trapped per year = 6000 × 0.85 / 1.2 = 4,250 m³. Life = 60,000 / 4,250 = 14.1 years. Ignoring trap efficiency gives 12.0; ignoring density gives 11.8. In reality trap efficiency falls as the reservoir fills, so life is somewhat longer. 10.2 years multiplies by the trap efficiency instead of dividing (60,000 × 0.85/5,000).
Soil & Water Conservation Engineering · Sediment yield
7. Under the machinery risk-reduction principle of ISO 12100, the correct order of measures is
information for use, then safeguarding, then design
warning signs first, then design changes only if accidents later occur
inherently safe design, then safeguarding, then information for use
safeguarding, then personal protective equipment, then design
Answer and working
C. inherently safe design, then safeguarding, then information for use
The three-step method starts with eliminating or reducing hazards by design, then guards and protective devices, then warnings and instructions for the residual risk.
Human Engineering, Ergonomics & Safety · Safety standards and ROPS
8. A test report gives the maximum drawbar power of a tractor on a concrete track as 80 per cent of its maximum PTO power. A researcher wants to estimate drawbar power in tilled soil. The most defensible approach is to
use the 80 per cent track ratio unchanged, since it is set by the transmission alone
raise the ratio above 80 per cent, since soft soil lets the tyres grip with less slip
use the ratio of engine to PTO power, since drawbar losses match transmission losses
apply a lower, soil-specific ratio from traction theory or field data
Answer and working
D. apply a lower, soil-specific ratio from traction theory or field data
On a hard track rolling resistance and slip are small; in tilled soil both rise, so the drawbar-to-PTO ratio falls. Estimating field drawbar power needs a soil-specific ratio from traction prediction or measured field data. The track ratio is not set by the transmission alone, soft soil increases slip, and drawbar losses include tyre and soil losses, not only gear losses.
Farm Machinery Testing, Evaluation & Standards · Interpreting test reports