ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papersICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. LAN-based computer test, 2 hours, 120 MCQs: 20 Part A (general knowledge and reasoning), 50 Part B (core group), 50 Part C (specialisation); four options.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Unit 6 (material handling, packaging and transport) and Unit 7 (storage engineering) at PG depth: derivation and assumptions of Janssen's equation, Airy's wedge analysis, flow patterns and Jenike design, moisture migration, airflow resistance and fan selection, fumigation CT and resistance, CA/MA equilibrium, permeation theory, shelf-life models and packaging machinery.
Storing grain and produce safely, the loads it puts on bins and silos, and the conveyors and packages that move and protect it.
Our 69 ICAR AICE-JRF/SRF questions in this subject: 2 easy, 40 medium, 27 hard, across 11 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Why is headspace carbon dioxide monitoring used as an early warning of spoilage in stored grain?
D. Insects and moulds respire and raise CO2 before a temperature rise reaches a distant sensor cable
Because grain conducts heat poorly, a hot spot may be far from any temperature cable and go unnoticed; the CO2 it produces diffuses and is carried by air movement to the headspace, where it can be sensed earlier. CO2 rises, not falls, with biological activity, and it is not produced by phosphine.
In a 6 m diameter bin (μ′ = 0.4, k = 0.4), at roughly what depth does the Janssen pressure reach 95% of its limiting value?
C. 28.1 m
1 − e^−x = 0.95 when x = 3 (e^−3 = 0.050). So μ′kh/R = 3 → h = 3R/(μ′k) = 3 × 1.5/(0.4 × 0.4) = 28.1 m. At h = R/(μ′k) = 9.4 m the pressure is only 63% of the limit; using the bin radius (3 m) instead of the hydraulic radius R = D/4 = 1.5 m gives 56.2 m. 11.2 m omits k (3 × 1.5/0.4).
A square bin of 5 m side holds grain of specific weight 7.6 kN/m³. With k = 0.45 and μ′ = 0.35, what is the Janssen vertical pressure at 12 m depth?
D. 47.0 kPa
R for a square = side/4 = 1.25 m. μ′kh/R = 0.35 × 0.45 × 12/1.25 = 1.5120. V = (γR/μ′k)(1 − e^−x) = (60.317)(1 − 0.2205) = 47.0 kPa. γh = 91.2 kPa ignores wall friction; using R = side/2 gives 64.0 kPa; kV = 21.2 kPa is the lateral pressure.
Why do grain-bin design standards apply overpressure factors to static Janssen pressures?
B. Pressures during discharge, eccentric flow and thermal or moisture effects can exceed static fill pressures
Measured wall pressures during emptying (and with eccentric flow, swelling or wall contraction in cold weather) can exceed the static Janssen values, so standards multiply them by factors. The factors increase, not reduce, design loads.
A 3 g tablet contains 56% aluminium phosphide (AlP, 57.95 g/mol). How much phosphine (PH3, 34.00 g/mol) can it release?
C. 0.99 g
AlP = 3 × 0.56 = 1.68 g = 0.0290 mol; 1 mol AlP gives 1 mol PH3, so PH3 = 0.0290 × 34.00 = 0.99 g (about 1 g). 1.68 g is the mass of AlP, not PH3; 1.76 g ignores the 56% content; inverting the molar mass ratio gives 2.86 g.
A fumigation label concentration is given as 1 g/m³ of phosphine. What is this in ppm (v/v) at 25 °C?
B. 719 ppm
ppm = (mg/m³) × Vm/M = 1000 × 24.45/34.0 = 719 ppm. Using 22.41 L/mol gives 659; treating mg/m³ as ppm gives 1,000; inverting gives 1,391.
A condition common to CA, MA and hermetic storage is that
A. It must be gas-tight
Without a seal, air leaks in and the modified atmosphere reverts to air. None requires raised O2, high temperature or prior fumigation.
How does a multihead combination weigher achieve accurate fills of irregular pieces such as snacks?
C. A computer selects the combination of weigh buckets whose total is closest to the target
Each head weighs a partial charge; the controller evaluates combinations and discharges the best one, giving high accuracy for irregular products. Cup and auger fillers are volumetric.
How does inclining a screw conveyor affect its capacity at constant speed?
D. Capacity falls
As the angle increases, material falls back over the flight and the loading efficiency drops, so capacity falls.
En-masse (chain) conveyors move grain
C. As a continuous mass in an enclosed casing, gently and at moderate capacity
In an en-masse conveyor, flights on a chain drag the material, which moves as a solid mass in the casing, with little damage. The other options describe pneumatic, thrower and vibratory systems.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.